Xqbbtc1288 dehydration collision

1. Hello, I'm a repairer of household appliances. How many years have you bought your washing machine? Take a look, quality assurance... According to what you said, check whether the door cover is well covered. However, we need to see what fault code you have and need pictures to help you. Personal opinion, I hope you can accept it. I hope it can help you.

2. What's the reason for this model to start washing again when it's dehydrated? Maybe his computer control was messed up, so he started washing again.

3. Contact after-sales service, give you maintenance, don't delay the use.

4. Hello, thank you for asking the question to the enterprise.
Haier has more than 9kg automatic washing machines. You can book the following models in your local store Purchase:

xqb100-btc1288s washing / dehydration capacity 10kg

xqs100-btc1288 washing / dehydration capacity 10kg

xqs130-tc1288 washing / dehydration capacity 13kg

thank you for your attention<

welcome to ask questions to the enterprise again.
I wish you a happy working life~

5. If you choose the right program, if you don't dry it, if it's not blocked, it may be a problem with the computer board, to see if the drain pipe is blocked

if the washing machine is thrown and water enters into it, check whether the washing machine is leveled. It may be that the washing machine is not leveled or the clothes are not leveled. The outer cylinder touches the safety switch

6. First, check whether the pressure pipe is worn; Then the water level sensor can be replaced; If not, it may be the problem of computer board program

7. Hello, thank you for asking the enterprise
c1288 series is a large capacity washing machine launched by Haier, which is specialized in washing large clothes. At present, it has expanded to 8.5Kg, 10kg and 13kg models

the features of this series of washing machines are that they can clean large items such as spring and autumn quilt, summer quilt, down jacket and car seat cover. Professional washing proceres can solve the problem of unclean washing and floating of large items. At the same time, this washing machine can also save water and electricity when cleaning small items

it is recommended that you consider purchasing
you are welcome to ask questions again.

I wish you a happy working life~

8. Xqb60-s9288 washing machine can not be dehydrated. When it is dehydrated, it will switch to water injection and rinsing (clothes self balance)
the reason is that more clothes are put into the washing machine for washing and dehydration at one time, and the clothes are unbalanced ring dehydration
the clothes are seriously unbalanced. When the dewatering bucket starts to rotate, it will directly touch the safety switch, causing the washing machine to stop working
the general clothes are unbalanced and heavy. In the process of high-speed rotation of the dewatering bucket, e to the centrifugal force, the dewatering bucket shakes more severely and collides with the outer dewatering bucket to make a collision sound

if the offset of the clothes is unbalanced, the outer barrel of the washing machine will collide with the safety switch. At this time, the washing machine will automatically carry out the self balancing procere of the clothes, that is, stop dehydration, and turn to water injection - wave wheel swing (balance clothes) - Drainage - dehydration again. If the requirement of clothes dehydration balance is not met, the washing machine will automatically perform several self balancing proceres, and then beep to inform and shut down

for automatic washing machines, the solution is to rece the amount of dehydrated clothes washed once.

9. 1. First, check the safety switch on the machine cover, turn on the washing machine, adjust the program to the dehydration state, and press the brake arm of the safety switch to the lowest level with hands or tools. If the computer board alarms and the digital tube displays "E1", the safety switch or computer board should be replaced
2. If the brake arm of the safety switch can be dehydrated normally after being pressed down by hand or tools, it indicates that the power-off distance of the safety switch is too low, so the safety switch should be replaced
3. If in the dehydration state, only the wave wheel turns to the inner barrel and does not rotate, check whether the traction 3 has separated the clutch pawl from the ratchet wheel. If not, the adjusting rod nut on the drain valve is loose and worn, resulting in insufficient opening distance. At this time, the distance of the adjusting rod should be readjusted to separate the clutch pawl from the ratchet wheel
if the motor of the washing machine is powerless when it is dehydrated
1. First check whether the belt is worn and the belt tightness is too loose. If the belts on both sides can touch each other, the belt is worn. At this time, the position of the motor can be adjusted and the belt can be tightened. However, if the belt is worn too much or the motor position cannot be adjusted, the belt should be replaced
2. If the belt is normal, it is mostly e to the decrease of the starting capacitance of the motor. At this time, a new capacitor with the same capacity should be replaced
3. If it has not been solved, the problem may appear on the computer board, and the thyristor of the control motor has been damaged. At this time, we can measure whether the voltage of the motor is normal ring operation. If not, replace the SCR or computer board
4. If the motor is damaged, it should be replaced
for reference only

10.

bus line: Baoshan No.2 → Metro Line 3 → no.929, the whole journey is about 22.7km

1. Walk from Baoshan District to Youyi Road Station of Youyi Branch Road

2. Take Baoshan No.2 bus, pass 3 stops, and reach Youyi Road Station of Tongji Road

3. Walk about 180m to Youyi Road Station

4. Take Metro Line 3, pass 13 stops, and reach Baoshan Road Station

5 Walk about 300 meters to Gongxing Road Station on Qiujiang road

6, take bus 929, pass 1 stop to Tiantong Road (Qipu Lianfu) station on Henan North Road

7, walk about 770 meters to the credit reference center of the people's Bank of China