tb250btcd

1. Yingtai tb250-btc D + motherboard is a mining professional board. Why separate power supply for each of the pcies? This is because a single interface power supply is not enough. With so many independent graphics cards, it is necessary to plug them separately. This is designed for the stable use of multiple graphics cards,

2. Yingtai tb250-btc D + motherboard is a mining motherboard. The miner needs a special power supply. The output ports all use 6pin interface, all of which are 12V output. The 5V and 3.3V power supply interfaces in 24pin are canceled. The motherboard belongs to a professional application board, so it is not suitable for ordinary PC host power supply, so it needs to use a special 6pin 12V full interface power supply. Such as: quanhan fsp1600w rated power mining special power supply.

3. The adapter line has a great influence on the multi graphics card of mining machinery. Let's not mention the antenna effect of the adapter line itself and the influence of time delay on the mining performance. The poor quality of the optical adapter line itself causes poor contact, insulation damage and short circuit. Each problem not only affects the mining, but also may cause damage to the graphics card. Direct insertion can avoid this problem, Both efficiency and stability have been greatly improved.

4. You can't answer this question. The motherboard is not a generator. Of course, it needs external power supply. Maybe you are talking about whether the graphics card needs external power supply. It depends on the similarity and power of your graphics card. If there is an external graphics card port, it naturally needs external power supply. As for the main board, the CPU uses seven phase power supply, and the graphics card also uses the enhanced power supply design. The overall power supply is stable, which can ensure the stability of the whole machine.

5. B250 itself supports the M2 interface. Although adding m2 to the feeder board is unnecessary, you can transfer the PCI X4 channel from m2 to the graphics card. Mining only relies on GPU general-purpose computing, and has low performance requirements for hard disk and CPU
however, to play mining, it is recommended to buy a more efficient ant miner instead of a graphics card. The graphics card is only a general-purpose calculation, not a specific one. The ant miner has higher efficiency and lower power consumption.

6. Because now many people choose solid-state hard disk to install,
although mining does not need a large capacity storage device, it is not bad to use a small capacity solid-state hard disk, and the whole mining system will run more efficiently.

7. Yingtai tb250-btc
D + is just a motherboard. Its power consumption is only a few watts, which can be ignored. You didn't say how many graphics cards to use, what kind of graphics card to use, and how to calculate. Let's take the most common 8 * 560d as an example. The power consumption of the whole machine is about 650W. In this way, the power consumption is about 16kWh in a day. As for the electricity charge, all over the country, All kinds of electricity are different. Just take a ride.

8. Now mining graphics card prices are skyrocketing, because the graphics card let people rob out, in short supply, so the price is high
2, the graphics card can be used for calculation, so it is generally indispensable in mining, and the amount of graphics card is quite large
in short, as long as the supply of graphics cards exceeds the demand, the price of graphics cards will come down. Just wait a minute

9. My friend, we dig different mines

10. IPFs is a protocol. Star miner. It is said that these are all projects of Nanyue international.