Yingtai tb350btc main board CPU power supply
Publish: 2021-05-14 07:15:21
1. Yingtai tb250-btc D + motherboard is a mining motherboard. The miner needs a special power supply. The output ports all use 6pin interface, all of which are 12V output. The 5V and 3.3V power supply interfaces in 24pin are canceled. The motherboard belongs to a professional application board, so it is not suitable for ordinary PC host power supply, so it needs to use a special 6pin 12V full interface power supply. Such as: quanhan fsp1600w rated power mining special power supply.
2. The lower right corner of the picture seems to be the interface of the front panel of the chassis, because the picture is too fuzzy
it is suggested to take a clear picture and send it to confirm.
it is suggested to take a clear picture and send it to confirm.
3. You can't answer this question. The motherboard is not a generator. Of course, it needs external power supply. Maybe you are talking about whether the graphics card needs external power supply. It depends on the similarity and power of your graphics card. If there is an external graphics card port, it naturally needs external power supply. As for the main board, the CPU uses seven phase power supply, and the graphics card also uses the enhanced power supply design. The overall power supply is stable, which can ensure the stability of the whole machine.
4.
The motherboard uses Yubang capacitor, 7-phase power supply, 24-hour work, as long as the power supply is stable is no problem
5. Where is the power management of Yingtai tb350 BTC motherboard
Press del to enter the BIOS setting, and select power
management
setup
Press del to enter the BIOS setting, and select power
management
setup
6. Supporting 6 cards requires the support of motherboard hardware. In other words, the motherboard should have more than 6 PCI interfaces. If the motherboard is used for mining, it must support multiple graphics cards without changing the settings.
7. It's very simple to judge whether it's the power supply or the motherboard. You unplug the power cord and find the green line. Short circuit the green line and any black line with metal things or wires. If the power fan turns, the power supply is good. If it doesn't turn or just moves, it means there is a problem inside the power supply. If the power supply is good, it is recommended to send the motherboard for repair. There must be something burning inside and short circuiting, which will cause the self-protection shutdown of the power supply.
8. This can only be seen by looking at the motherboard structure
by counting the number of inctors beside the CPU, we can know which phase is the power supply. Only those around the CPU slot are. Most inctors are cube shaped
however, for the vast majority of people, the CPU power supply does not need to care, because this is absolutely enough
according to the evaluation of a technical house, only one phase is left after the power supply circuit of the main board is disassembled, but even so, it can still supply I3 3240 with very stable power supply, even when the toaster is working, but the temperature of the inctor is relatively high at this time. The final conclusion is that one phase power supply can supply I3 with stable operation, but it can not operate stably for a long time, However, only two phases is enough for I3 to work well, and four are enough for i5
of course, the more power supply, the lower the flow rate and temperature of each inctor, which can ensure the stability as much as possible, but there is no need to pursue a high number of power supply phases.
by counting the number of inctors beside the CPU, we can know which phase is the power supply. Only those around the CPU slot are. Most inctors are cube shaped
however, for the vast majority of people, the CPU power supply does not need to care, because this is absolutely enough
according to the evaluation of a technical house, only one phase is left after the power supply circuit of the main board is disassembled, but even so, it can still supply I3 3240 with very stable power supply, even when the toaster is working, but the temperature of the inctor is relatively high at this time. The final conclusion is that one phase power supply can supply I3 with stable operation, but it can not operate stably for a long time, However, only two phases is enough for I3 to work well, and four are enough for i5
of course, the more power supply, the lower the flow rate and temperature of each inctor, which can ensure the stability as much as possible, but there is no need to pursue a high number of power supply phases.
Hot content