B350btc setting

1.

ASUS b350plus motherboard can start AHCI mode in BIOS through the following steps:

1. Click F2 or del to enter BIOS interface after power on

after setting, click F10 to save and exit BIOS

2. Its overall configuration is relatively high, so in this respect, it is very worth choosing, there is no problem, and the overall effect is very good.

3. Micro star B350 Tomahawk motherboard (AMD B350 / socket AM4) is a very good motherboard. It is a medium performance motherboard with good quality and performance
brand: MSI motherboard
launch time: February 2017
CPU interface: socket AM4
amd chip: AMD B350
motherboard version: ATX (standard)
memory type: DDR4
maximum memory: 64GB

4. Windows, PE, DOS can brush. It is suggested that you refresh the BIOS related tutorials on the Internet, and learn how to do it again.

5.

Need to use the tools are: ASUS computer, U disk

1. Open ASUS computer, select Delete and enter BIOS settings, as shown in the figure below:

6. The problem description is not very clear, and there is no supplementary explanation. Specifically, what problems are encountered, whether some settings of software and hardware have been changed, and what use effects need to be achieved. If there are corresponding screenshots, it is recommended to upload them together, and then supplement the specific situation description, so as to give targeted explanation or introction.

7.

As follows:

1. If the U disk is a PE boot disk, you can insert it into the computer and press F11 to enter it after power on

2. You can also set the U disk as the first boot disk in BIOS in advance

8. There are two ways to overclocking:
first, use software to overclock CPU
use softfsb software, which is a CPU overclocking software
the state of the main board clock generator is directly controlled by software, and the working frequency of the CPU is changed ring the working process, so as to achieve the purpose of overclocking, "that is, out of service". If there is an overclocking fault, you only need to restart to recover< Second, through the main board BIOS overclocking CPU
boot up, press del key to enter the BIOS main menu, and then enter the "frequency / voltage control" option, where you can set the CPU's external frequency, frequency doubling, CPU voltage and other parameters, first to adjust the CPU's external frequency, use & quot on the keyboard; Up and down & quot; Press the key to move the cursor to "CPU clock", and then press enter to input the external frequency.

9. The first step is to change it into Chinese
in the second step, advanced frequency - CPU advanced settings - the first four of the six options are turned off
Step 3, advanced voltage setting - the first keyboard input is 0.12
Step 4, CPU frequency doubling keyboard input is 38
Step 5, store and leave the setting.