How much did bitcoin drop at its peak
Publish: 2021-04-14 12:07:22
1.
In 2009, when bitcoin first appeared, one dollar could buy 1300 bitcoins. In 2010, it was only $0.003. In November 2013, the highest price created by bitcoin reached 8000 yuan for the first time. In 2017, bitcoin's price rose wildly. In this year, bitcoin once created the highest price in history, with the highest value of about 20000 US dollars
that is to say, a bitcoin costs about 130000 yuan. According to the proportion, bitcoin has soared by 2.73 million times in eight years, becoming a well deserved proct with huge profits. According to the data of coindesk digital currency trading platform, the price of bitcoin once fell below $6000 in 18 years, and it has dropped 70% compared with the highest value of $20000 in 2017
with the decline of bitcoin, many digital currencies have been affected, with a decline of more than 10%. It has been less than 10 years since the development of digital currency. Many large enterprises can't compare with it. It can be seen that the future of digital currency is worth looking forward to
2. It's hard to say. The worst result is zero
there are many unsuccessful currencies in history, such as the Deutschmark in the Weimar Republic and, more recently, the Zimbabwean dollar. Although previous currency failures were usually e to over inflation that could not happen on bitcoin, there were always potential technical errors, currency competition and political problems. The basic lesson is that no currency can be considered absolutely safe from failure or difficult times. Bitcoin has been proven reliable for several years since its birth, and it has great potential to continue to grow. But no one can predict the future of bitcoin< The rapid rise in price of BR />
does not constitute a bubble. Artificial overestimation will lead to a sudden downward revision, which will form a bubble. The price fluctuation of bitcoin caused by the indivial behavior of thousands of market participants is the result of the market determining the price. From the emotional point of view, the reasons for price changes include: the loss of confidence in bitcoin, the huge difference between price and value not based on the fundamentals of bitcoin economy, more and more news reports stimulating speculative demand, fear of uncertainty, and outdated irrational prosperity and greed.
there are many unsuccessful currencies in history, such as the Deutschmark in the Weimar Republic and, more recently, the Zimbabwean dollar. Although previous currency failures were usually e to over inflation that could not happen on bitcoin, there were always potential technical errors, currency competition and political problems. The basic lesson is that no currency can be considered absolutely safe from failure or difficult times. Bitcoin has been proven reliable for several years since its birth, and it has great potential to continue to grow. But no one can predict the future of bitcoin< The rapid rise in price of BR />
does not constitute a bubble. Artificial overestimation will lead to a sudden downward revision, which will form a bubble. The price fluctuation of bitcoin caused by the indivial behavior of thousands of market participants is the result of the market determining the price. From the emotional point of view, the reasons for price changes include: the loss of confidence in bitcoin, the huge difference between price and value not based on the fundamentals of bitcoin economy, more and more news reports stimulating speculative demand, fear of uncertainty, and outdated irrational prosperity and greed.
3. It depends on what kind of machine you use. In the current global unified computing difficulty, it takes more than 2500 years for a 2.5GHz CPU of a home computer to work out a bitcoin. It takes about 13 days for a mining machine to process 600 GHz data per second.
4. Manual shooting skills of SLR camera
1. Take close-up pictures of small still objects, such as flowers, birds and insects:
use AV file, the aperture should be f5.6 or below, the focal length should be more than 50, and try to shoot within 1m to make the background virtual
if the light is good, ISO 100, if the light is bad, ISO should be within 400<
2. Shooting people:
basically use a large aperture (within f5.6) and a focal length of more than 50 mm. The shooting distance depends on the whole body, half body and big head, which makes the background virtual. Use AV file
good light, iso100, bad light, iso400
people in motion use tracking to reflect the sense of motion (see the shooting of moving objects below for details)<
3. Shooting:
AV file, use the appropriate aperture, above F8, the focal length is arbitrary, but generally the wide-angle end has distortion, use it as appropriate<
4. Shooting night scene:
upper tripod, AV gear, custom white balance or incandescent lamp, aperture above F8, small aperture can make the light proce starlight effect, use the reflector pre rising function to rece the vibration caused by the reflector lifting after pressing the shutter; And cover the viewfinder with the square cover on the strap to prevent stray light from entering from the back and affecting the image quality; ISO 200, as far as possible to make the exposure time longer, so that some people who have no intention to walk away from the screen disappear, leaving no traces, clean the scene
for example, when taking a square with people coming and going, you can use a very small aperture of about F20 and iso100. In this way, the exposure time will be very long, and the moving figures will not stay in the photos! The square will be clean<
5. Shooting fireworks:
using shutter line and B shutter, you can shoot multiple fireworks overlapping effect<
6. Shooting things:
when the light is good: AV, the aperture size should be handled according to the circumstances; Large depth of field can be obtained by using aperture above F8, and shallow depth of field can be obtained by using small aperture
if you want to have a very dynamic effect, you can use the TV gear, the shutter is about 1 / 30, when you focus and press the shutter, the lens will follow the object at an appropriate speed, which will proce a very dynamic effect
poor lighting: we can only handle it according to our own discretion, plus use the follow-up camera<
7. Shooting running water or fountain:
using TV and about 1 / 50 shutter speed, you can shoot Satin effect. If you use too fast shutter speed, the fountain will shoot discontinuous water drops<
8. Taking photos at night:
use tripod to adjust white balance, and automatically or custom white balance; iso100-400 AV gear, aperture about F8, use slow synchronous flash, rear curtain flash mode; At this time, the flash will flash twice, press the shutter to flash once, and flash again before the end of exposure, so don't leave before flashing twice
in this way, the characters can be clear and the background neon is beautiful, so that the background will not be too dark e to insufficient exposure< No matter what you shoot, don't shoot with the maximum aperture unless you want to keep a safe shutter
2. Please use the aperture of F8 ~ F11 as much as possible when shooting scenery
3. The maximum aperture can be reced by 1-2 levels when taking close-up of people and still life
4. The safety shutter should be controlled above the reciprocal of the focal length as far as possible. The wide-angle shutter should also be more secure at more than 1 / 30 second. If the shutter is insufficient, please increase the aperture or ISO<
metering method:
1. Don't measure the light to the sky or the darkest place. Go to the middle value
2. According to your subject matter, make good use of the metering mode (balance metering, point metering, central key metering...)
3. If the light measurement is not accurate, please use AE lock to expose and lock the gray things around you before shooting
4. Try not to measure the light on white or black objects, otherwise remember to rece eV for black and increase eV for white<
EV is exposure compensation.
exposure compensation is also an exposure control method, which is commonly used in ± If the ambient light source is dim, the exposure value (such as + 1eV, + 2eV) can be increased to highlight the clarity of the picture
most of the small digital cameras adjust the exposure compensation through the menu
in the process of shooting, if you press half of the shutter, the LCD will display pictures similar to the final effect picture, focusing and exposure will start. The exposure at this time is exactly the exposure of the final picture. If the picture is obviously bright or dark, it means that the automatic metering accuracy of the camera has a large deviation, and the exposure compensation should be enforced, but sometimes the brightness displayed ring shooting is different from the actual shooting result. Digital camera can browse the picture immediately after shooting, at this time, you can more accurately see the brightness of the picture, there will be no difference. If the shooting result is obviously bright or dark, it is necessary to re shoot and force the exposure compensation
the shooting environment is dim, and the brightness needs to be increased. When the flash cannot work, the exposure can be compensated and the exposure can be increased appropriately. For exposure compensation, if the photo is too dark, increase the EV value. Every 1.0 increase in EV value is equivalent to doubling the amount of light intake. If the photo is too bright, decrease the EV value. Every 1.0 decrease in EV value is equivalent to doubling the amount of light intake. The compensation interval can be adjusted in 1 / 2 (0.5) or 1 / 3 (0.3) units according to different cameras
when the white object to be photographed looks gray or not white enough in the photo, it is necessary to increase the exposure. In short, "the whiter the object is, the more white the object is." this seems to run counter to the basic principles and habits of exposure. In fact, it is not. This is because the main body of the camera is often the center of the light measurement, and the White main body will make the camera mistakenly think that the environment is very bright, As a result, the exposure is insufficient, which is also a common problem for most beginners
because the shutter time or aperture size of the camera is limited, it is not always able to reach the 2eV adjustment range, so the exposure compensation is not omnipotent, and it may still be underexposed in too dark environment. At this time, it is necessary to consider cooperating with the flash or increasing the ISO sensitivity of the camera to improve the brightness of the picture
generally speaking, the smaller the brightness contrast of the scene, the more accurate the exposure, otherwise, the larger the deviation. The grade of the camera is high and low. If the grade is high, the metering is more accurate, and if the grade is low, the deviation will be increased. If it is a traditional camera, the tolerance of film is relatively large, and the exposure deviation will not have a big problem within a certain range, but the CCD tolerance of digital camera is relatively small, and slight exposure deviation may affect the overall effect
in a word, the adjustment of exposure compensation is determined by experience and sensitivity to color. Users must compare the image quality, clarity, restoration degree and noise size under different exposure compensation to get the best picture
note:
the aperture in Canon's manual refers to the F value. The larger the aperture, the greater the depth of field
generally speaking, aperture refers to aperture, which is inversely proportional to F. the larger the aperture, the smaller the depth of field
AV -- aperture priority auto exposure
TV -- shutter priority auto exposure
AE auto exposure
AF auto focus
AF-S -- single auto focus, the same as saf. The opposite is continuous autofocus
MAF - monitor AF, which can shorten the focusing time. The camera will adjust the focus before half pressing the shutter button, so that you can compose with the adjusted focus. When the shutter button is half pressed and AF locking is completed, the focus will be locked
ev - exposure value, which is usually used in exposure compensation
ISO sensitivity. Each difference of sensitivity is equivalent to the corresponding exposure value of aperture or shutter
brother, if you have time, go to ZhongGuanCun video forum and see the forum.
1. Take close-up pictures of small still objects, such as flowers, birds and insects:
use AV file, the aperture should be f5.6 or below, the focal length should be more than 50, and try to shoot within 1m to make the background virtual
if the light is good, ISO 100, if the light is bad, ISO should be within 400<
2. Shooting people:
basically use a large aperture (within f5.6) and a focal length of more than 50 mm. The shooting distance depends on the whole body, half body and big head, which makes the background virtual. Use AV file
good light, iso100, bad light, iso400
people in motion use tracking to reflect the sense of motion (see the shooting of moving objects below for details)<
3. Shooting:
AV file, use the appropriate aperture, above F8, the focal length is arbitrary, but generally the wide-angle end has distortion, use it as appropriate<
4. Shooting night scene:
upper tripod, AV gear, custom white balance or incandescent lamp, aperture above F8, small aperture can make the light proce starlight effect, use the reflector pre rising function to rece the vibration caused by the reflector lifting after pressing the shutter; And cover the viewfinder with the square cover on the strap to prevent stray light from entering from the back and affecting the image quality; ISO 200, as far as possible to make the exposure time longer, so that some people who have no intention to walk away from the screen disappear, leaving no traces, clean the scene
for example, when taking a square with people coming and going, you can use a very small aperture of about F20 and iso100. In this way, the exposure time will be very long, and the moving figures will not stay in the photos! The square will be clean<
5. Shooting fireworks:
using shutter line and B shutter, you can shoot multiple fireworks overlapping effect<
6. Shooting things:
when the light is good: AV, the aperture size should be handled according to the circumstances; Large depth of field can be obtained by using aperture above F8, and shallow depth of field can be obtained by using small aperture
if you want to have a very dynamic effect, you can use the TV gear, the shutter is about 1 / 30, when you focus and press the shutter, the lens will follow the object at an appropriate speed, which will proce a very dynamic effect
poor lighting: we can only handle it according to our own discretion, plus use the follow-up camera<
7. Shooting running water or fountain:
using TV and about 1 / 50 shutter speed, you can shoot Satin effect. If you use too fast shutter speed, the fountain will shoot discontinuous water drops<
8. Taking photos at night:
use tripod to adjust white balance, and automatically or custom white balance; iso100-400 AV gear, aperture about F8, use slow synchronous flash, rear curtain flash mode; At this time, the flash will flash twice, press the shutter to flash once, and flash again before the end of exposure, so don't leave before flashing twice
in this way, the characters can be clear and the background neon is beautiful, so that the background will not be too dark e to insufficient exposure< No matter what you shoot, don't shoot with the maximum aperture unless you want to keep a safe shutter
2. Please use the aperture of F8 ~ F11 as much as possible when shooting scenery
3. The maximum aperture can be reced by 1-2 levels when taking close-up of people and still life
4. The safety shutter should be controlled above the reciprocal of the focal length as far as possible. The wide-angle shutter should also be more secure at more than 1 / 30 second. If the shutter is insufficient, please increase the aperture or ISO<
metering method:
1. Don't measure the light to the sky or the darkest place. Go to the middle value
2. According to your subject matter, make good use of the metering mode (balance metering, point metering, central key metering...)
3. If the light measurement is not accurate, please use AE lock to expose and lock the gray things around you before shooting
4. Try not to measure the light on white or black objects, otherwise remember to rece eV for black and increase eV for white<
EV is exposure compensation.
exposure compensation is also an exposure control method, which is commonly used in ± If the ambient light source is dim, the exposure value (such as + 1eV, + 2eV) can be increased to highlight the clarity of the picture
most of the small digital cameras adjust the exposure compensation through the menu
in the process of shooting, if you press half of the shutter, the LCD will display pictures similar to the final effect picture, focusing and exposure will start. The exposure at this time is exactly the exposure of the final picture. If the picture is obviously bright or dark, it means that the automatic metering accuracy of the camera has a large deviation, and the exposure compensation should be enforced, but sometimes the brightness displayed ring shooting is different from the actual shooting result. Digital camera can browse the picture immediately after shooting, at this time, you can more accurately see the brightness of the picture, there will be no difference. If the shooting result is obviously bright or dark, it is necessary to re shoot and force the exposure compensation
the shooting environment is dim, and the brightness needs to be increased. When the flash cannot work, the exposure can be compensated and the exposure can be increased appropriately. For exposure compensation, if the photo is too dark, increase the EV value. Every 1.0 increase in EV value is equivalent to doubling the amount of light intake. If the photo is too bright, decrease the EV value. Every 1.0 decrease in EV value is equivalent to doubling the amount of light intake. The compensation interval can be adjusted in 1 / 2 (0.5) or 1 / 3 (0.3) units according to different cameras
when the white object to be photographed looks gray or not white enough in the photo, it is necessary to increase the exposure. In short, "the whiter the object is, the more white the object is." this seems to run counter to the basic principles and habits of exposure. In fact, it is not. This is because the main body of the camera is often the center of the light measurement, and the White main body will make the camera mistakenly think that the environment is very bright, As a result, the exposure is insufficient, which is also a common problem for most beginners
because the shutter time or aperture size of the camera is limited, it is not always able to reach the 2eV adjustment range, so the exposure compensation is not omnipotent, and it may still be underexposed in too dark environment. At this time, it is necessary to consider cooperating with the flash or increasing the ISO sensitivity of the camera to improve the brightness of the picture
generally speaking, the smaller the brightness contrast of the scene, the more accurate the exposure, otherwise, the larger the deviation. The grade of the camera is high and low. If the grade is high, the metering is more accurate, and if the grade is low, the deviation will be increased. If it is a traditional camera, the tolerance of film is relatively large, and the exposure deviation will not have a big problem within a certain range, but the CCD tolerance of digital camera is relatively small, and slight exposure deviation may affect the overall effect
in a word, the adjustment of exposure compensation is determined by experience and sensitivity to color. Users must compare the image quality, clarity, restoration degree and noise size under different exposure compensation to get the best picture
note:
the aperture in Canon's manual refers to the F value. The larger the aperture, the greater the depth of field
generally speaking, aperture refers to aperture, which is inversely proportional to F. the larger the aperture, the smaller the depth of field
AV -- aperture priority auto exposure
TV -- shutter priority auto exposure
AE auto exposure
AF auto focus
AF-S -- single auto focus, the same as saf. The opposite is continuous autofocus
MAF - monitor AF, which can shorten the focusing time. The camera will adjust the focus before half pressing the shutter button, so that you can compose with the adjusted focus. When the shutter button is half pressed and AF locking is completed, the focus will be locked
ev - exposure value, which is usually used in exposure compensation
ISO sensitivity. Each difference of sensitivity is equivalent to the corresponding exposure value of aperture or shutter
brother, if you have time, go to ZhongGuanCun video forum and see the forum.
5. CPU has always been able to mine, but its efficiency is not as high as graphics card. For example, you pay 10000 yuan to hire four college students to calculate addition, subtraction, multiplication and division for you, and 10000 yuan to hire 40 primary school students to calculate addition, subtraction, multiplication and division for you. Which efficiency do you think is high?
6. There are all kinds of news reports,
the Hong Kong bitcoin exchange has closed down, with us $386 million of customers' funds missing,
this is another runaway
the Hong Kong bitcoin exchange has closed down, with us $386 million of customers' funds missing,
this is another runaway
7. At 14:03 on March 25, the price of bitcoin was: US $6692
on March 12, the price of bitcoin fell to US $3800
if you want to pay attention to the price fluctuation, you can check it directly on the market software, which is more timely than the information you get by asking questions.
on March 12, the price of bitcoin fell to US $3800
if you want to pay attention to the price fluctuation, you can check it directly on the market software, which is more timely than the information you get by asking questions.
8.
On December 17, last year, according to the bitcoin platform cex.io, bitcoin's US dollar quotation broke through the US $20000 mark for the first time, reaching a new record. The quotations of several major bitcoin trading platforms overseas also approached the US $20000 mark at the same time. However, the price of bitcoin fell below US $14000 on December 22 e to the theft of 60000 bitcoins on Ukrainian exchange liqui on December 21 and hacker attacks on some trading platforms
for the current round of decline. Some analysts believe that it is e to South Korea's regulatory policy. On January 11, according to foreign media reports, South Korea's Ministry of justice was preparing legislation to pave the way for the complete closure of domestic exchanges. On January 10, bithumb and coinone, two South Korean exchanges, were raided by the IRS, which was also seen as verifying whether there were tax evasion and financial transactions on the exchanges. On January 8, the chairman of the South Korean Financial Services Commission said at a news conference that he was concting a joint inspection with the South Korean Financial Supervision Institute on six banks providing cryptocurrency account services to verify the anti money laundering regulations previously formulated and the implementation of real name system measures for relevant accounts
9. Button light ~ ~ ~ ~ button light~~~~~~
10. Don't be silly. It's a conspiracy
Hot content