How about Pansheng BTC motherboard

1. Pansheng motherboard workmanship quality is very good. But because some people sell second-hand and repair board as genuine, the price is rotten. More than 600 boards are sold to more than 300. People think that the more expensive the same bridge board is, the better. In fact, Pansheng has always been an entity authorization channel, never selling online. It's all fake online
from the official explanation of Pansheng.

2. The brand of Pansheng plays an important role in the hearts of the older generation of DIYer. In the K7 era, 8kta3 +, 8kha +, 8rda + and other procts can be said to be a generation of classics. At that time, Pansheng (Pansheng), Shengji and Meijie, which were famous for their overclocking capability and cost performance, were all first-line bottom and second-line top procts, Pansheng and Meijie have declined... And the overclocking performance of the motherboard is also valued by all manufacturers, and the overclocking capability can no longer be a selling point on the motherboard......
Pansheng, formerly known as Pansheng, is headquartered in Taiwan, China. When Pansheng entered the mainland market, it was preempted by xintianxia group with the trademark "Pansheng", Therefore, the brand name of Taiwan pan Ying in mainland China has been replaced by Pan Zheng. Pan is entering the mainland market, holding high the banner of cost performance, with low price and high quality to win the favor of many consumers
at the beginning of 2007, e to the huge amount of money owed by Pansheng to elites, Pansheng broke the rumor of bankruptcy. Later, "Pansheng" motherboard was still on sale, but its English logo was changed from epox to supox, and dealers quoted the phrase "Pansheng super Pansheng" more when promoting motherboards
according to the official announcement, as early as 2004, the PC motherboard R & D team of Taiwan pan Ying had transferred to the mainland. The mainland pan Zheng motherboard was completely separated from Taiwan pan Ying in terms of capital, R & D, proction, market and sales, and focused on the R & D and proction of PC motherboards. In 2006, it launched a series of procts called super pan hand
no matter what the official explanation is, after the "Pan Zheng bankruptcy" incident, pan Zheng's sales, proct publicity and even services are declining, especially in the eyes of DIYer experts, this brand may have been "dead"...
If Meijie has completely fallen into the third tier brand, now pan Zheng is probably the second tier brand, As the saying goes, it's just "average". The quality of the motherboard is relatively poor (relative to the access goods), but the BIOS settings and updates are often criticized by consumers. There is a saying in the instry that "the motherboard is easy to do, but the BIOS is hard to write". From this point of view, Pansheng is no longer as brave as it used to be

3. Pansheng motherboard is a Taiwan brand with high cost performance, good quality and performance. Some people don't use it, or they don't know how to use computers at all. I think it can rank first in the comprehensive evaluation of cost performance. Because of its moderate price and good quality. Of course, if you have money, you can consider buying ASUS and gigas, but the price is much higher. Generally speaking, I think it's better than MSI and elites, because MSI and elites have shrunk seriously in recent years, and the repair rate is too high

4. The first line is certainly not. After all, the recognized first lines are ASUS, Gigabyte and MSI. I think that Pansheng should belong to the second-line top brand. After all, Pansheng is an old factory with more than 20 years of mainboard manufacturing experience. The materials, quality control and workmanship are very good. Of course, there is another big advantage, that is, Pansheng's high cost performance.

5. Pansheng motherboard belongs to a third tier brand. It's not very famous. I've used this motherboard before. The materials used are very common. The motherboard design and interface are also not very good. The only advantage is cost performance. It's a good choice for people who don't have high requirements,

6. It's no longer the Taiwan pan Ying that used to be. Because Taiwan pan Ying has long exited the mainland market, now there is no pan Zheng in the mainland. It's just the brand of some pan Zheng distributors, so the design and quality can be imagined;; So you were cheated, and don't be angry, when you pay a tuition

7. What four core CPU, I faint. The price difference is very high
Intel Core i7: 18000 RMB is this? This can be equipped with three graphics cards to make a three open screen computer without pressure
Intel quad core (South Bridge, North Bridge): 600 RMB independent graphics card with seven rainbow is enough, and a garbage CPU is not as good as the performance of core al core i5
Intel Core 4-core i7 generation 1: Intel Core 4-core i7 generation 2: Intel Core 4-core i7 generation 3: what CPU are you
amd speed Dragon 4 core
it is suggested that those with al cores should not use Quad cores. Recommend the second or third generation of core i5
graphics cards are generally two-thirds of the price of CPU. Shadow car is recommended for the game. Stable sapphire is recommended. The performance of a card is better than that of N card at the same price. Some games support n-card Open Physics to accelerate the performance of a-card.

8. The original Pansheng has stopped. Now it's only handed over to a small factory for OEM. Now it's only OEM
Onda is a little bit similar. I also use Onda's motherboard, and I don't have my own processing plant. It's all OEM and OEM, and I'm not very well-known. After sales are average. Now my Onda motherboard often has those small faults.

9. Turn the ranking of a motherboard, let DIY novices have a bottom in mind
the DIY market is now a dazzling mix of good and bad. In order to let you see the confusion clearly and truly, I'm going to introce the common brands of accessories in the market by stages, so that you can have a general understanding of the advantages and disadvantages of the brands. I hope it can be helpful to the students who buy the machine
this time we will first introce the main board. Since we are mainly discussing the DIY market, we can not only arrange seats according to the shipment volume, but also evaluate them according to the channel sales, main board quality, market reputation and other comprehensive factors. We still use the traditional way to introce and comment:

first-line brands:
the main characteristics are strong research and development ability, fast launch of new procts, complete proct lines, and excellent high-end procts. At present, ASUS is widely recognized by the following three brands:
ASUS: the world's largest motherboard manufacturer, and also recognized as the first motherboard brand, The high-end motherboard is particularly excellent, and the overclocking ability is very strong; At the same time, its price is also the most expensive. In addition, some low-end models also have relatively poor procts<

MSI: the shipping volume ranks among the top five in the world, and the annual campus command MSI is very popular among college students. Its main feature is that the accessories are complete and luxurious, but the overclocking capability is not excellent. In addition, some models at the middle and low end are shrinking seriously, which makes counterfeiters often find opportunities<

Gigabyte: its shipment volume is comparable to that of MSI. It is always famous for its gorgeous workmanship, but it is not flashy. It is also not outstanding in overclocking. The middle and low-end models have shrunk as much as MSI, so it is often troubled by fakes<

quasi first tier brands:
the three major manufacturers all have a common "problem", that is, they focus on Intel, while they are more or less inattentive to AMD platform, which has a relatively small sales volume. Therefore, several main board brands focusing on DIY market emerge. Although they are not as famous as the big three, their motherboard quality is not inferior at all, so we temporarily list them as quasi first-line brands:

abit: they always regard overclocking as the first priority, and their materials are not inferior to first-line brands, so they are favored by many DIYer. In the survey of well-known foreign media, promotion is ranked second after ASUS. Due to the promotion only do DIY market, motherboard shipment is not big, in the domestic reputation is still a little bit less, so can only temporarily stay in the front line of this position<

panzheng (epox): formerly known as panying, it was renamed panzheng because it was registered in China. Similar to the style of Shengji, the overclocking capability is also well-known, and the accessories are more complete and the price is relatively lower, so it also has many fans<

second line brands:
in some aspects, they are slightly inferior to first-line brands, but they all have considerable strength and their own characteristics:

Foxconn (Foxconn): Affiliated to Taiwan's Hon Hai group, the main board shipment volume has ranked second in the world, catching up with ASUS - of course, most of them are OEM and OEM. In the past two years, it used to enter the mainland market as a "rich capital" brand, but nothing happened. The real private brand has only entered the DIY market for more than a year. At present, its acceptance is not high, and its proct line is not complete. However, it is believed that it can do better with the strength of Hon Hai<

elite (ECS): it once surpassed ASUS in terms of shipment volume, but it was overtaken in the past two years and now ranks third in the world. Different from other big factories, the elite always follow the low price route. The main board is made of mediocre materials, and the overclocking capability is almost zero. The accessories are also the most basic. However, only two years ago, the elite also tried hard to change and launched the high-end "extreme" series motherboard. We are looking forward to the better performance of the elite<

Intel: with this name alone, its influence is definitely higher than that of ASUS, but it's completely OEM. At present, it's all made by Foxconn. There's no need to say that the materials are used for manufacturing, but it can't be overclocking at all. There are few accessories, which are despised by DIYer. It's more suitable for families and enterprises<

Albatron: it was founded by a senior management of gigabyte, claiming to be "first-line quality and second-line price", which is no less than that of the first-line manufacturers in all aspects. The price is also lower, and the overclocking ability is outstanding. At present, it is not well-known. But I am optimistic about this brand, with its strength can enter the ranks of first-line manufacturers<

Biostar: it is also a world-class motherboard manufacturer, but it has only entered the DIY market in the past two years. Although it has "nine wonders" and other characteristic technologies, it has average overclocking capability, which is also suitable for household and commercial use<

Chaintech: it's also a famous show, and it's also very attentive in the DIY market. Its proct line covers high, medium and low grades, and its workmanship is excellent. It's also good in overclocking, but its market channel is not very good. It's rare in the market in the past two years<

Aopen: a very creative manufacturer affiliated to Acer Group of Taiwan. It used to make the vacuum tube on the main board with excellent materials and good overclocking ability. However, the price is high and the channel is poor, so it is not well accepted in China

acrop: in the OEM market, the shipment volume is relatively large, so it can also rank among the top ten in the world. However, in the DIY market, it is very unsatisfactory. The trademark has been registered and the sales volume has been greatly affected. Motherboard work is good, "motherboard doctor" is commendable, but the ability of overclocking mediocre<

hermits of second-line brands:
the reason why these brands are listed separately is that they are all very strong, but for various reasons, they are not easy to see in the market:

Iwill: a well-known manufacturer of server / workstation motherboards, has also launched some DIY motherboards with outstanding quality, but e to lack of experience in DIY market, So sales have been very small<

Volkswagen (FIC): an old brand in the motherboard instry. Before 1999, it was one of the three largest motherboard manufacturers in Taiwan, second only to ASUS and elite. However, in recent years, it has graally declined. At present, we can only see Volkswagen's OEM procts<

Leadtek: a well-known graphics card manufacturer, is the most senior partner of NVIDIA. In recent years, it has entered the motherboard instry. The motherboards it launched are mainly nForce series chipsets, which are luxurious and cost-effective, but the market acceptance is not high. In 2004, Li Tai was acquired by Hon Hai, and its development prospects are relatively optimistic, but in the future, I'm afraid its main board will be called "Foxconn"<

diamond (DFI): as a senior motherboard manufacturer, lanparty series can be regarded as luxury. However, e to the poor channel, we can only see the motherboards manufactured by diamond. However, it is reported that diamond will return to the mainland market this year, which is absolutely good news for DIYer<

Soyo: it is the first motherboard with its own brand in Taiwan. In the Ben II era, the popularity of Soyo is no less than that of ASUS and other first-line brands. However, the mainland branch of Meijie suffered losses and had to withdraw from the mainland market at the end of 2001. Although it returned to the mainland at the end of 2003, the whole market has been completely divided up. It is still unknown whether Meijie can make a comeback<

syntax: a motherboard brand from California, USA, is said to have a high reputation in Europe and the United States, and the motherboard seems to be well made, but can it find a way out among the motherboard powers in Taiwan? Let's see<

via: originally, it was only a chip designer, and the introction of its own brand motherboard was the result of market competition. At first, the P4 chipset designed by Weisheng was not authorized by Intel, and the major motherboard manufacturers were afraid to proce the P4 motherboard based on via chipset under the pressure of Intel's yinwei. In this case, Weisheng had to make its own motherboard. In fact, it was OEM by other manufacturers, with good materials and good price. Later, Weisheng and Intel reached a settlement, The brand then faded out of the market<

third tier brands:
they have the manufacturing capacity and try to keep down the price on the premise of ensuring stable operation, which is the main feature of these third tier manufacturers. Recently, the market competition is becoming increasingly fierce, and some brands have disappeared, such as Xinming, Qilin, Huangchao, Zeling, lianxun, etc, Let's just introce what we can see:

ASRock: in order not to affect its high-end image, ASUS launched this new brand. Its main purpose is to crack down on the low-cost motherboards including the elite, which are designed by ASUS technicians but proced in Shenzhen. It's quite creative in technology, but the motherboard's quality is not so good. It's said that its repair rate is very high?? Who can confirm it

Junxing (MBI): seeing that Huaqing is booming in the low-end market, Weixing can't sit still, so it launched this brand in the summer of 2004, but Huaqing has occupied most of the low-end market, so Junxing doesn't know whether it can hold up

Axper: Jijia's low-end brand has the same purpose as Junxing, and it is basically launched at the same time. The three major manufacturers will also launch a fierce competition in the low-end market<

SOLTEK: originally, it could be listed as a second-line brand. The motherboard has a high cost performance ratio, and it used to be OEM for Viagra motherboard. However, e to the price war in recent two years, the quality of motherboard has gone from bad to worse, and now it can only be reced to a third line brand< Soking: its name is very similar to that of soking, and it also comes from Taiwan. However, soking is actually another manufacturer with R & D and manufacturing capabilities, but its market influence is not great at present<

Jetway: it's a passable motherboard brand, with a series of special technologies named "spirit". The motherboard's quality is average. It used to name the motherboard of p4x266a chipset "848P", and its brand image has been greatly affected.

kodia (QDI): the former Lenovo motherboard, which belongs to the QDI division of Lenovo Group, It is the largest motherboard supplier in mainland China. At the beginning of 2004, Lenovo Group separated the QDI business and set up an independent subsidiary. The brand kodia came into being. However, QDI's strength and reputation are not as good as those of Taiwan manufacturers. I'm afraid that the only thing we can do now is to compete for the price<

shuttle: a powerful Taiwanese manufacturer, it is difficult to see its motherboard in the market at present because of the unprecedented fierce competition in the motherboard instry

Boden (XFX): the manufacturer is Taiwan's Songjing technology, which mainly makes graphics cards. The motherboard is also good, but it is also rare

Ocean (octek): it is the largest motherboard manufacturer in Hong Kong. It was very popular in the 486 era. Later, it faded out of the retail market e to market adjustment. Although it returned to the mainland in 2002, it failed to open up the situation. I don't know if it will be seen in the future

Topstar: a brand from Shenzhen, with independent R & D and manufacturing capabilities, claims to be the first in China

10. Hello

your question is not appropriate
Pansheng is a three line brand motherboard with average quality and workmanship
Acer doesn't make motherboards at all. It makes laptops and displays

good luck. If you have any help, please consider adopting it!