Installation of Qicaihong h81btc
2. Whether it can be turned on normally under the test of other computer configuration
1. This does not need too many settings, the best graphics card to use NV graphics card 2, the system win10, the power supply is sufficient, the latest version of the motherboard BIOS, the BIOS settings for the main graphics card to PCI e
2, the hard disk must be GPT format, the system must be 64 bit, UEFI does not support 32-bit system
note: UEFI can boot x64 system on MBR disk, but it needs special settings
3. The traditional MBR partition only supports 2.2t hard disk, and the hard disk larger than 2.2t needs GPT, and the BIOS supports opening the integrated graphics card (which can be set) to double display
However, Qicaihong does not have the motherboard of h81-a. h81-a is an ASUS brand and can not support six graphics cardsselect factory settings in BIOS, press enter to save and exit, then discharge the main board COMS, and then enter BIOS to set
{rrrrrrr}
extended data:
seven rainbow motherboard boot into BIOS method:
1, you can press del key to enter BIOS
2. You can boot the BIOS directly without connecting the hard disk
there are two conditions for supported graphics cards:
1. Several graphics cards are supported in a few slots, and the expansion slots of ciex1 and pciex16
The main board power supply and power supply are enough. When most motherboards are turned on, you can enter the BIOS interface by continuously pressing the "del" key. Some notebooks can only enter the BIOS interface by pressing F2 BIOS is not only the basic input and output system of computer motherboard, but also the basic system of communication and recognition between computer hardwarecontents include: power settings, hardware on / off, hardware working mode settings, overclocking, etc. The contents of bios are in English. Now some brands of new motherboards support Chinese. The options in BIOS can't be set randomly without understanding its specific function, so as to avoid the computer can't boot normally
its main function is to provide the most direct hardware setting and control for the computer. In addition, BIOS also provides some system parameters to the operating system
the change of system hardware is hidden by BIOS, and the program uses BIOS function instead of directly controlling the hardware. Modern operating systems ignore the abstraction layer provided by BIOS and directly control hardware components
BIOS Setup program mainly manages and sets the basic input and output system of the computer to make the system run in the best state. Using BIOS Setup program can eliminate system faults or diagnose system problems
note: strictly speaking, UEFI can also boot x64 system on MBR disk, but special settings should be made. This is the general situation
2. The traditional MBR partition only supports 2.2t hard disk, and the hard disk larger than 2.2t needs GPT, otherwise it will be wasted; Microsoft operating system supporting UEFI startup: all 64 bit systems after Windows Vista SP1
3. Installation requirements: the installation media must start the computer in UEFI mode. Cut! A lot of people die at this stage. If you start the installation program as before, there will be an error prompt that you cannot install to the GPT partition, which will cause the installation failure
① turn on UEFI mode in BIOS
② the installation media supports UEFI startup
③ for Windows 7 and its previous systems, when using U disk or mobile hard disk to install, how to add UEFI support files:
extract bootmgfw.efi file from Windows 8 installation file, rename it as bootx64.efi, and it to # 92 of win7 installation file; EFI\ Boot\ Next, there is no new boot folder
bootmgfw.efi can also be obtained from the installed win8 system
④ when the first two conditions are met, the U disk or mobile hard disk boot item marked with "UEFI" will appear in the boot menu. Select this item to "start the computer in UEFI mode"!
the settings have been adjusted in the new BIOS. There are operation steps in DOS. You can refer to the following
Mining graphics card to install a driver. Mining generally uses the same chip graphics card
-
after the computer is turned on, when you see the power on screen, press & quot; ESC or F11 & quot; Key
-
the default option is U disk startup, so we can directly press enter to enter U disk startup
< / OL >
the first is the CD-ROM installation system. Suitable for computer BIOS settings are very familiar with it Find and enter the option with the word "BIOS" in the BIOS interface. 1. "Advanced BIOS features"
2. After entering "advanced BIOS features", find the first boot device option with "first"
3. In the "first boot device" option, select "CDROM" enter. After all the configurations are set, click "CDROM" enter, Press the "F10" key on the keyboard to save and exit, then the computer will restart itself, and the rest is to install the system automatically
the above steps are to set up BIOS startup. Each computer BIOS settings are different, you can refer to it. Once you learn, you can install the system on CD
the second is the U disk installation system. Suitable for computer BIOS settings are very familiar with it. After reading the U disk making tutorial, you will use the disk to install the system. Go to the computer store to u.diannaodian.com/jiaocheng/index.html to learn how to install the system
the third is the hard disk installation system. Refer to the installation of ghost base for specific operation www.ghost008.com/jiaocheng/ System tutorial, as long as the computer system does not crash, can enter the system, and can download things, you can use the computer hard disk to install the system.
virtual machine
or buy an old model of graphics card and sound card,.. Installation of network card
2. After turning on the computer, when you see the boot screen, press the "ESC or F11" key on the keyboard continuously, and you will enter a window to select the boot sequence
