Haier xqb100btc1288

1. The washing machine has not been designed in a unified way. The parts of washing machines proced by different factories are different
Haier xqb100 needs to be purchased and replaced_ Btc128 washing machine hanger,
it is recommended to contact Haier washing machine after-sales service department according to the model and brand of washing machine to purchase and replace it.

2. Hello, I'm a repairer of household appliances. How many years have you bought your washing machine? Take a look, quality assurance... According to what you said, check whether the door cover is well covered. However, we need to see what fault code you have and need pictures to help you. Personal opinion, I hope you can accept it. I hope it can help you.

3. What's the reason for this model to start washing again when it's dehydrated? Maybe his computer control was messed up, so he started washing again.

4. Contact after-sales service, give you maintenance, don't delay the use.

5. 1 Haier washing machine fault code FC refers to the circuit communication fault, which indicates that there is a problem with the line connection of the washing machine. This may be caused by the abnormal communication between the computer board and the driver board< (2) Troubleshooting:

1. Check whether the communication cable between the main control board and the drive board is inserted in place

2, check whether the power board supplies power to the driver

3. If there is a problem with the circuit, it is recommended to contact the professional after-sales service.

6. The correct use steps of automatic washing machine: first, place the washing machine on a solid ground, level the washing machine, plug in the power plug, connect the faucet and turn it on, press the power button, press the number of washing clothes, set the high, medium and low water level of the water level switch, put the clothes and washing liquid into the washing machine, set the washing procere, and then start the washing machine. When the water level of the washing machine reaches the set water level, the washing machine will automatically complete all the work from water injection to washing to rinsing to final dehydration. After the buzzer prompts, take out the clothes to dry.

7. If you choose the right program, if you don't dry it, if it's not blocked, it may be a problem with the computer board, to see if the drain pipe is blocked

if the washing machine is thrown and water enters into it, check whether the washing machine is leveled. It may be that the washing machine is not leveled or the clothes are not leveled. The outer cylinder touches the safety switch

8. There are many fault codes of Haier washing machine:
F1: poor contact of water level sensor of Haier washing machine
E1: Haier washing machine drainage time-out, check whether the drainage pipe is blocked
E2: the upper cover of Haier washing machine is not properly covered
E3: the dehydration of Haier washing machine is unbalanced, and the clothes are shaken apart and dehydrated again
E4: Haier washing machine water inflow timeout, check the water pressure, whether the water inlet valve is dirty and blocked
E5: the water temperature of Haier washing machine exceeds 50 ℃
E6: does Haier washing machine use high foam detergent? Fault code of Haier drum washing machine. This answer applies to any Haier washing machine

9. The model of wave wheel washing machine is
XQB
XQS
XPB
all washing machines with s are al power washing machines