Baoji Tianjin maintenance center to the 30th floor of Tianjin In

1. First, although the case of Baoji watch is mostly nickel chromium alloy, which is a very solid material, sweat still has a certain corrosive effect on the case. Therefore, the user should pay attention to wipe the sweat on the watch case, so as to rece the damage of sweat on the watch case
secondly, do not open the back cover of Baoji watch casually, because if particles in the air enter the watch, it may affect the life of the watch
thirdly, if your Baoji watch is not used for a long time, it must not be placed near camphor pills, because it may cause deterioration of the watch oil. In addition, do not place it on the radio or TV for a long time to avoid the watch being magnetized. At the same time, wind the last time every month, so as not to affect the performance of the watch
Fourth, avoid water contact with your Baoji watch, so it's better to take it off when washing clothes or taking a bath to avoid water intrusion. If the watch accidentally water, should be based on the situation and choose treatment. If the water is not very serious, but there is some fog on the inner dial, you can wrap the watch with toilet paper or absorbent flannel, and then bake it next to a 40W light bulb for half an hour to remove the fog. Do not bake by open fire to avoid damaging the watch
another method can be used for those with more influent water. Put the watch in a container containing a lot of silica gel. After a period of time, the water in the watch can be completely removed. This method is simple and affordable, saves the cost of repair in the store, and will not affect Baoji watch
finally, let's introce how to rece the error of Baoji watch. Because there are many uncertain factors in life, it is easy to affect the accuracy of the watch. Therefore, to minimize the impact on the watch, we should try to rece the watch big collision, do not place it in an overheated or supercooled place, in addition, we must wind it regularly. Only in this way can your Baoji watch work for a long time.

2. Watch inspection:

[ruizuan Tianjin famous watch customer service center]

1. Overall appearance, the master will first carry out visual inspection on the watch appearance after obtaining the watch, mainly to check whether there are scratches, deformation and scratches on the bottom cover of the watch, whether there are missing screws on the bottom cover, the distance and tightness of the crown

2. Check the dial face for st and oxidation scratch, especially the position of pointer and scale

3. The details of the watch strap, whether the strap has defects or peeling, no holes, and whether the strap buckle has scratches; If it is made of steel, it is necessary to carefully check whether there are scratches, whether the raw ear of the watch is properly installed, and whether the elastic flexibility of the button is suitable

4. Check the tightness of the upper bar, check the tightness of the upper bar of the watch, adjust the time, confirm whether the hour hand and scale are accurate, and the smoothness of calendar conversion. When the calendar is fast jumping, remember not to jump between 9:00 p.m. and 0:3 p.m., so this period is regarded as a forbidden zone, If the calendar is adjusted quickly, the gear will be damaged< In order to detect the travel time, we need to detect the travel time in six directions, namely, whether the diurnal difference, swing and partial earthquake are normal or not. However, because each person wears a watch in a different way, we will check the travel time in many ways to find out the most accurate problem, and then carry out maintenance after recording

[service address: room 3003, 30 / F, Tianjin International Financial Center building, 136 Chifeng Road, Heping District, Tianjin]

3. The magnetic field is everywhere and can't be prevented. Yubo watch, which has always been accurate in travel time, suddenly appears the situation of travel time error. The first thing is to guess whether this watch is magnetized. There are many steel materials in mechanical watches, such as big and small steel wheels, escapement wheels, tenons of gears, bearings, screws and hairpins. Therefore, watches are very easy to be magnetized. Once the mechanical watch is magnetized, the first impact is that the watch's travel time is not accurate and there are errors. The serious situation is that the watch stops
moreover, in the process of the development of today's social life, more and more electronic procts appear around us. Therefore, the magnetic field is around us, there is only the difference between the strength of the magnetic field. Various types of permanent magnets are also widely used in electrical appliances, such as loudspeakers and motors. Magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel. There is also the magnetic buckle on the leather bag. Watches and credit cards are most afraid of getting magnetic. A mechanical watch is usually fast when it is magnetized (it will stop if it is seriously magnetized). If the hairspring rings are glued together, the watch will go faster, about 2 hours / day faster. Steel parts are most easily magnetized, including escapement wheels and escapement forks
when the watch is magnetized, it can be demagnetized. The principle of the demagnetizer is to generate an alternating magnetic field. If the watch is put into the magnetic field, it will be demagnetized. If it is a constant magnetic field, it will be magnetized. Demagnetizer can be bought or self-made, general professional watch shop has demagnetization service. Moreover, in later daily life, we must pay attention not to put the watch next to or near the electrical appliances (such as audio, refrigerator, computer, etc.) that generate magnetic field, or magnetic objects (such as magnets, mobile phones).

4. Watch inspection: [ruizuan Tianjin famous watch customer service center]
1. Overall appearance: after the master obtains the watch, he will first conct a visual inspection on the watch appearance, mainly to check whether there are scratches, deformation and gouges on the bottom cover of the watch, whether the screws on the bottom cover are missing, the distance and tightness of the crown
2. Check the dial face for st and oxidation scratch, especially the position of pointer and scale
3. Details of the watch strap, whether the strap has defects or peeling, no holes, and whether the strap buckle has scratches; If it is made of steel, it is necessary to carefully check whether there are scratches, whether the raw ear of the watch is properly installed, and whether the elastic flexibility of the button is suitable
4. Check the tightness of the upper bar, check the tightness of the upper bar of the watch, adjust the time, confirm whether the hour hand and scale are accurate, and the smoothness of calendar conversion. When the calendar jumps quickly, remember not to jump between 9:00 p.m. and 0:3 p.m., so this period is regarded as a forbidden zone. If the calendar is adjusted quickly, the gear will be damaged
5. To detect the travel time, we need to detect the travel time in six directions, namely, whether the diurnal difference, swing and partial earthquake are normal. However, because each person wears a watch in a different way, we will check the travel time in many ways to find out the most accurate problem, and then carry out maintenance after recording
[service address: room 3003, 30 / F, Tianjin International Financial Center building, 136 Chifeng Road, Heping District, Tianjin]

5. Mechanical watch cleaning: [ruizuan Tianjin famous watch customer service center]
clean the hygiene dead corner. After a watch is worn for a long time, a lot of dirt will remain at the edge of the bottom cover of the case and around the crown, which will directly affect the appearance. When you pull out the watch crown to adjust the watch, the dirt will cross the last line of defense of the outer layer and take advantage of the opportunity to invade the movement. Needless to say, future troubles will follow, and your watch will not go right. Please note that cleaning the appearance of watch is not the usual "wash oil"! Although they are the real sludge, the "oil washing" in the field of watch maintenance is the process of adding lubricating oil to the movement. In view of the above situation, the case and strap are cleaned with toothbrush and professional detergent, and then cleaned and dried with clean water
if the watch is no longer waterproof, be very careful when cleaning it. Humid and sultry in summer will make the sweat remaining in the inner layer of the belt give off a sharp smell. For the hygiene and beauty of the belt, please choose a special leather cleaner. The new watch should tear off the protective film on the back cover of the case in time, and the sweat will remain in the gap of the film. After a long time, it will leave a circle of corroded marks. The part corroded by sweat and dirt may cause skin allergy
[service address: room 3003, 30 / F, Tianjin International Financial Center building, 136 Chifeng Road, Heping District, Tianjin]

6. Shanghai Watch Service Center is a modern large-scale service-oriented enterprise focusing on watch maintenance. Headquartered in Shanghai, the company has set up maintenance service centers in large and medium-sized cities across the country, forming a huge watch maintenance service network to provide convenient and fast watch maintenance services for consumers!

7. Breguet queen series, 18K White Gold goose egg case, the case specification is 28.45mm × It is 36.50 mm, with 117 inlaid diamond bezels, with a total weight of about 0.99 carat. 18K Gold Plated Silver dial and Tahiti Black Pearl mother shell dial. The dial is engraved with pictures. The base time flashes. The small second hand dial is set at 7 o'clock. The rhodium plated moon phase profit and loss indicator and power storage indicator are set at 12 o'clock. The scale circle adopts Roman numeral time scale. Baoji blue steel pointer with hollowed out needle tip. In terms of power, the watch is equipped with calibre537drl1 active winding movement, linear Swiss lever escapement device and flat balance hairspring, and the vibration frequency is 21600 times per hour. The power is stored for 40 hours. Waterproof depth up to 30 meters. Equipped with 18K platinum thread chain
Breguet / Breguet / Breguet queen series
Breguet / Breguet queen series, a high-end jewelry workshop, takes the lead in the trend, and plans out luxurious and bold jewelry for you to match at will, reflecting the perfect integration of profound jewelry technology and innovative energy
watch the perfect operation of calibre517f through the bottom cover of sapphire crystal glass. The movement uses silicon escapement device and silicon flat balance hairspring to ensure the accuracy of the vibration frequency of the balance wheel, and works at a regular and stable rate of 28800 times per hour.

8. When we first entered the world of famous watches, we might only have one watch on hand. Maintenance may have never been a problem for us at that time. Later, with the growing addiction to watches, the number of watches will increase from one to two, then to three, four or even five. On the other hand, the watch you get may be a brand new set of watches under protection, or a single watch without a card, or even an old watch or an antique watch. At this stage, watch repair and maintenance problems graally appear. Some players once said "maintenance is not very important, but very important". When I first heard this sentence, I couldn't feel it. Now, I pay more and more attention to the maintenance of watches. It's really very important, and even affects how you choose watches. Let's make an account. Rolex and omega watches, including watches of the same brand, have movement maintenance and washing oil. According to the complexity of movement (from three needles without calendar to timing movement), the price ranges from more than 2000 yuan to more than 5000 yuan (I don't know about Tourbillon and so on). In addition to washing oil, the most frequently changed parts are the sealing parts on the crown. Because the screw in lock handle is sure to wear out after only a few years, the customer service center generally recommends replacing it. The price I remember is 380 (if I pass the waterproof test ring the test, I won't replace it). You can add in the price yourself. When a watch is guaranteed for five years, there is no problem at all. However, when you have more and more watches, you will send them for insurance more and more times, and the probability of problems will be greater and greater (the watch will inevitably break, and I still have a certain brand of timepiece that has not been repaired). We will graally find that if we take turns to maintain many watches in our hands, we can buy another watch at a price (I have maintained and repaired several watches in the past, and some of them are not intended to be maintained)

recommend a store: Tianjin world watch customer service center, located in room 3003, 30 / F, Tianjin International Financial Center building, 136 Chifeng Road.