How can Huang Beiling get to the exhibition center
Publish: 2021-05-03 21:39:44
1.
address of Shenzhen Convention and Exhibition Center: Northwest of the intersection of Jintian road and Binhe Avenue
< UL >
address of Shenzhen Convention and Exhibition Center: Northwest of the intersection of Jintian road and Binhe Avenue
2. M269 (original 945) - & gt; Metro Line 4
Guanlan bus station (Guanlan market)
m269 (original 945) (passing through 18 stations | 9.9km)
passing through: Guanlan bus station (Guanlan market), Gangtou Village (Sanxing Hotel), Jisheng Hotel, Guanlan Central Primary School (Guanlan town government), Guanlan people's Hospital, Yinhe new village (Weiguang hospital), Guanlan second primary school (Fumin intersection), Guanlan fourth instrial zone, Tianbei village, Zhucun (Yongjun station), Qinghu market (Qinghua intersection), Longhua bus station, city Pearl Garden (frontier hospital), new City Garden (Longhua Branch of Municipal People's Hospital), Tianhong shopping mall (Longhua), jinlonghua square, Longhua market, Longhua Park
Longhua Wanjia walk 275 meters, Longhua station
Metro Line 4 (Longhua line) (passing 10 stations | 15.2 km)
passing stations: Longhua station, Longsheng station, Shangtang station, Hongshan station, shilong station, Minle station, shangmeilin station, Lianhua north station, children's palace station, citizen center station
exhibition center station
Guanlan bus station (Guanlan market)
m269 (original 945) (passing through 18 stations | 9.9km)
passing through: Guanlan bus station (Guanlan market), Gangtou Village (Sanxing Hotel), Jisheng Hotel, Guanlan Central Primary School (Guanlan town government), Guanlan people's Hospital, Yinhe new village (Weiguang hospital), Guanlan second primary school (Fumin intersection), Guanlan fourth instrial zone, Tianbei village, Zhucun (Yongjun station), Qinghu market (Qinghua intersection), Longhua bus station, city Pearl Garden (frontier hospital), new City Garden (Longhua Branch of Municipal People's Hospital), Tianhong shopping mall (Longhua), jinlonghua square, Longhua market, Longhua Park
Longhua Wanjia walk 275 meters, Longhua station
Metro Line 4 (Longhua line) (passing 10 stations | 15.2 km)
passing stations: Longhua station, Longsheng station, Shangtang station, Hongshan station, shilong station, Minle station, shangmeilin station, Lianhua north station, children's palace station, citizen center station
exhibition center station
3.
bus line: Metro Line 2 → Metro Line 8, the whole journey is about 14.2km
1. Walk about 610m from Guangzhou to Memorial Hall Station
2. Take Metro Line 2, pass 5 stops, and reach Changgang station
3. Take Metro Line 8, pass 7 stops, and reach Xingang east station
4. Walk about 120m to Guangzhou International Convention and Exhibition Center
4. Take exit D or exit e, go straight to the crossroads and cross the road to the hall where there are a few ~!
5.
bus route: E26 → line 2 → line 1, the whole journey is about 20.8km
1. Walk about 390m from Yantian District to Yantian District government station
2. Take E26, pass 3 stops, and reach Huangbeiling subway station (or take No. 387)
3. Walk about 180m to Huangbeiling station
4. Take line 2, pass 2 stops, and reach Grand Theater station
5 Walk about 140 meters, transfer to line 1
6, take Line 1, pass 4 stops, arrive at the Convention and Exhibition Center Station
7, walk about 570 meters, arrive at Shenzhen Convention and Exhibition Center
6.
bus line: Line 2 → line 1, the whole journey is about 8.5km
1. Take line 2 from Huangbeiling, pass 2 stops, and reach the Grand Theater station
2. Walk about 140m, then transfer to line 1
3. Take Line 1, pass 4 stops, and reach the exhibition center station
4. Walk about 210m, and reach the exhibition center subway station
7. Take Metro Line 2 from Huangbeiling station to Grand Theater station, then turn to line 1 without leaving the station, and take it all the way to convention and Exhibition Center Station. Then follow the instructions to get out of the station.
8. Crusher safety operation proceres
I. reasonable use of crusher
1. The feeding specification of crusher shall not exceed 0.85 times of the size of feeding mouth
2. Jaw crusher must be started without load
3. Jaw crusher is suitable for crushing hard and medium hard ores
2. Preparation and inspection before operation
1. The thin oil lubrication system must be started before the crusher is started, and the crusher can be started only after the return oil is normal
2. Operate the manual oil drying cup to ensure sufficient oil filling at each lubrication point
3
4. At the same time, check the oil system for blockage and oil leakage
5. Check whether all kinds of instruments are normal enough
6. Check the crushing chamber for ore or other non crushing materials
7. Check whether the electrical interlocking device, light signal and protective facilities are complete and effective
3. Start operation method
start after completing the above inspection and preparation
1. Start the lubrication system, and start the ventilation and water supply system at the same time
2. According to the technological process, start the ore conveying system at the lower part of the crusher
3. Start jaw crusher without load
4. After normal operation, start the feeding system
5. Start up completed
6. The crusher with sectional start-up device should be started according to the crusher start-up procere< 4. Stop operation and emergency stop treatment
1. The crusher can be stopped only after all ore is discharged
2. Shut down the feed system before shutdown
3. Stop the oil pump and cooling water system after the main engine has been shut down for 5 minutes< (1) the temperature of the main bearing or movable jaw bearing rises sharply more than 80C °， The surface phenomenon is that the back of hand can not touch the bearing seat for one second
(2) the front or rear thrust plate is broken
(3) when the high-speed rotating transmission parts are loose or broken, they may fly out and hurt people
(4) when the motor smokes and sweeps the chamber
5. Emergency shutdown should meet the following requirements:
(1) when the bearing is shut down e to high temperature, it should not be shut down immediately
(2) for high-temperature shutdown, the ore feeding should be stopped first, the oil volume should be increased, forced air cooling or water cooling should be applied, and the shutdown can be started after the bearing temperature drops
v. precautions for safe operation
1. During operation, we often monitor whether all kinds of instruments are normal and whether there is abnormal sound in all parts
2. The electrical interlock system of crusher oil pressure can not be removed under any circumstances
3. When the machine is running, it is not allowed to stick to people in the rotary surface of jaw crusher
4. During operation, personnel are not allowed to use their hands to pick up large pieces of ore or other articles entering the machine
5. When dealing with the blockage of jaw crusher, the ore at the head of the feeder should be disposed of first, and then from the upper part. It is forbidden to use the barring car or from the lower part of the discharge port upward
6. When the lower funnel of jaw crusher is blocked, it is necessary to contact the feeder and belt conveyor, disconnect the power switch of belt conveyor, and send special personnel to monitor
in addition to choosing the right quality when purchasing jaw crusher, Red Star Machine reminds you to operate the machine in strict accordance with the safety operation regulations, so as to maximize the service life of the machine and rece the cost and investment.
I. reasonable use of crusher
1. The feeding specification of crusher shall not exceed 0.85 times of the size of feeding mouth
2. Jaw crusher must be started without load
3. Jaw crusher is suitable for crushing hard and medium hard ores
2. Preparation and inspection before operation
1. The thin oil lubrication system must be started before the crusher is started, and the crusher can be started only after the return oil is normal
2. Operate the manual oil drying cup to ensure sufficient oil filling at each lubrication point
3
4. At the same time, check the oil system for blockage and oil leakage
5. Check whether all kinds of instruments are normal enough
6. Check the crushing chamber for ore or other non crushing materials
7. Check whether the electrical interlocking device, light signal and protective facilities are complete and effective
3. Start operation method
start after completing the above inspection and preparation
1. Start the lubrication system, and start the ventilation and water supply system at the same time
2. According to the technological process, start the ore conveying system at the lower part of the crusher
3. Start jaw crusher without load
4. After normal operation, start the feeding system
5. Start up completed
6. The crusher with sectional start-up device should be started according to the crusher start-up procere< 4. Stop operation and emergency stop treatment
1. The crusher can be stopped only after all ore is discharged
2. Shut down the feed system before shutdown
3. Stop the oil pump and cooling water system after the main engine has been shut down for 5 minutes< (1) the temperature of the main bearing or movable jaw bearing rises sharply more than 80C °， The surface phenomenon is that the back of hand can not touch the bearing seat for one second
(2) the front or rear thrust plate is broken
(3) when the high-speed rotating transmission parts are loose or broken, they may fly out and hurt people
(4) when the motor smokes and sweeps the chamber
5. Emergency shutdown should meet the following requirements:
(1) when the bearing is shut down e to high temperature, it should not be shut down immediately
(2) for high-temperature shutdown, the ore feeding should be stopped first, the oil volume should be increased, forced air cooling or water cooling should be applied, and the shutdown can be started after the bearing temperature drops
v. precautions for safe operation
1. During operation, we often monitor whether all kinds of instruments are normal and whether there is abnormal sound in all parts
2. The electrical interlock system of crusher oil pressure can not be removed under any circumstances
3. When the machine is running, it is not allowed to stick to people in the rotary surface of jaw crusher
4. During operation, personnel are not allowed to use their hands to pick up large pieces of ore or other articles entering the machine
5. When dealing with the blockage of jaw crusher, the ore at the head of the feeder should be disposed of first, and then from the upper part. It is forbidden to use the barring car or from the lower part of the discharge port upward
6. When the lower funnel of jaw crusher is blocked, it is necessary to contact the feeder and belt conveyor, disconnect the power switch of belt conveyor, and send special personnel to monitor
in addition to choosing the right quality when purchasing jaw crusher, Red Star Machine reminds you to operate the machine in strict accordance with the safety operation regulations, so as to maximize the service life of the machine and rece the cost and investment.
Hot content