How can I get to Jiangning Civic Center on mozhou East Road

1. < < UL > < < < < < < < < < < < < < < < < < < < < < < < <

<

< P >

< P and, It's about 270 meters walk to the public square station in the district, To reach the Jiangning Citizen Center

< P >

P >

< / UL >

2.

bus line: no.868, about 3.4km

1. Walk about 30m from hedingqiao to hedingqiao South Station

2. Take no.868, pass 6 stops, and reach shengtaiqiao station

< P > 3. Walk about 950m to Jiangning Civic Center

3. Subway Line 1 to jiahu station, take 848 to the gate

4.

bus line: Metro Line 1 → no.848, about 8.6km

1. Take Metro Line 1 from Nanjing South Station, after 4 stops, to jiahu station

2. Walk about 360m, to jiahu station

3. Take no.848, after 1 stop, to district citizen Guangchang station

4. Walk about 230m, to Jiangning citizen center

5.

bus line: Metro Line 1 → no.848 ring 1, the whole journey is about 26.5km

1, walk about 440m from Nanjing railway station to Nanjing station

2, take Metro Line 1, pass 17 stations, reach jiahu station

3, walk about 370m, reach jiahu station

4, take no.848 ring 1, pass 1 station, reach district Citizen Square Station

5, walk about 230m, Arrive at Jiangning Citizen Center

6. Touching the management of fried chicken, including she just didn't show up, he would show up once. In the middle, it will restart once.

7.

Bus line: Metro Line 1 → 803, the whole journey is about 23.6km

1. Take Metro Line 1 from Sanshan street, pass 13 stops, and reach Tianyin Avenue Station

2. Walk about 140m to Tianyin Avenue subway station

3. Take 803, pass 7 stops, and reach the district Citizen Square Station

4. Walk about 150m to Jiangning administrative service station

8. Eth0 and eth1 are network card devices. It's just a name that doesn't need to be tangled. It's not an ordinary network card or a wireless network card that someone said. He doesn't understand anything
usually the server has multiple network cards, so it has the name eth0 eth1 eth2,
and in some systems, the wireless network card will be named WLAN 0 WLAN 1<

specifically, you can look under the directory etc / sysconfig / network scripts,
ifcfg-eth0 represents the configuration of eth0, you change the file to eth1, and make the next modification to the file content, that is eth1
of course, this configuration method is not applicable to all Linux systems, but it is applicable to RHEL.