Gtx1080 Ethereum computing power
Publish: 2021-05-05 15:17:38
1. Lightcoin is 1.8g. The computing power of the whole network is only 8600gh / s, and 1080ti graphics card occupies 1 / 4700
eth is only 32mh / s, 1070 has 40mh / s. Many people say that 1080ti can't pull up the computing power because of the high delay of gddr5x video memory. As expected, it's better to mine with a card. People on the Internet say that 480 can have 65mh / S computing power
Zec, 724sol / s, nearly three 1060 3G, the total price is more expensive than three 1060 2K soft coins. However, compared with the short supply a-card rx4808g, the price of three cards is less than 5K, and the computing power is 900 + sol / s, but it's useless if there is a price but no market
it's too wasteful to use this card for mining. It's just for fun and can't afford to hurt.
eth is only 32mh / s, 1070 has 40mh / s. Many people say that 1080ti can't pull up the computing power because of the high delay of gddr5x video memory. As expected, it's better to mine with a card. People on the Internet say that 480 can have 65mh / S computing power
Zec, 724sol / s, nearly three 1060 3G, the total price is more expensive than three 1060 2K soft coins. However, compared with the short supply a-card rx4808g, the price of three cards is less than 5K, and the computing power is 900 + sol / s, but it's useless if there is a price but no market
it's too wasteful to use this card for mining. It's just for fun and can't afford to hurt.
2.
- gtx1060's new gp-106 core has two groups of GPCS, each with five SMS (2 × 64), a total of 1280 CUDA processors, just half of the gtx1080. Single precision floating-point operation is 4.4tflops, which has nearly doubled compared with gtx960's 2.3t, so theoretically, the performance should be doubled
- gtx1060's new gp-106 core has two groups of GPCS, each with five SMS (2 × 64), a total of 1280 CUDA processors, just half of the gtx1080. Single precision floating-point operation is 4.4tflops, which has nearly doubled compared with gtx960's 2.3t, so theoretically, the performance should be doubled
- 1060 core frequency is 1506 ~ 1709mhz
< / OL >
3. This mobile phone mining is not free, but you can also play it for free, but if you play it for free, you have to have a lot of people before you can play it. Moreover, if you use this mining machine, you have to spend your own money to buy it, and then you can earn profits.
4. too laggy! But it's wasted to dig that thing!
5. The overclocking limits of different manufacturers are different. In terms of overclocking, ASUS's cards are relatively strong. In terms of heat dissipation, ASUS's cards are slightly better, and they are more expensive. This depends on your graphics card heat sink and BIOS, no matter how strong it will not exceed 1080ti.. Even the worst 1080ti is better than your 1080.. You get what you pay for.. 1080ti strong 1080 are generally between 25% - 35%, not overclocking can catch up.. 4K the highest special effects of the three a game 1080 can only 40-60 frames, and 1080ti can 70-90 frames
6. You can do it, but you are not recommended to do it yourself. The cost is relatively high and you can't do uninterrupted conversion. It is recommended that you buy ready-made UPS circuit, and then combine the battery according to the voltage required by the circuit. The general UPS is 12V battery
7.
The battery pack of electric tools can not be directly connected to the battery pack, because the circuit board needs short-circuit protection, can speed control and many other functions, and can be directly connected to the
8. First prepare a 12V power supply, intercalate a voltage resistor at the positive end to rece to 5V, connect a voltage stabilizing capacitor at 0-5 and 0-12 in parallel, and then connect a voltage stabilizing diode at 5 and 12 in series
9. Hello! Your equipment is 12W, that is, 12wh per hour, so the power consumption for 8 hours is 12 * 8 = 96wh
so your battery capacity should be higher than 96wh. For 12V battery, the current should reach 12W / 12V = 1a.
so your battery capacity should be higher than 96wh. For 12V battery, the current should reach 12W / 12V = 1a.
10. Switching power supply is needed to change from battery power supply to power supply
if the voltage is 12V DC, a 12V switching power supply is required
Input: l connected to live wire, n connected to neutral wire
output: connect + V to positive pole and - V to negative pole.
if the voltage is 12V DC, a 12V switching power supply is required
Input: l connected to live wire, n connected to neutral wire
output: connect + V to positive pole and - V to negative pole.
Hot content