Tianjin Chopin customer service center to the 30th floor of Tian
Publish: 2021-05-06 04:14:25
1. There are five common reasons for watch travel time error and watch travel time inaccuracy:
1) insufficient power storage: you need to check whether the power is sufficient first. If the amount of movement of the mechanical watch on the chain is very small, it may also cause insufficient power storage. You can supplement the power by manually on the chain, and then observe whether the phenomenon of speed continues
2) insufficient power: if the quartz watch suddenly finds that it is slow, it may be caused by insufficient battery energy, you can send the watch to a special maintenance point to check the power
3) have been hit or hit: the watch is very tight. If it is hit or hit, it may cause internal parts loose and damage, and it may also cause travel time problems. This is to be dealt with in time
4) maintenance required: the lack of oil in the movement or the wear and aging of internal parts may cause travel time problems, which need to be maintained and sent to the designated repair point for maintenance
5) in addition to the above common cases, the watch is magnetized e to the influence of some ambient temperature: if the hairspring of the watch is magnetized, the watch's travel time will be inaccurate.
1) insufficient power storage: you need to check whether the power is sufficient first. If the amount of movement of the mechanical watch on the chain is very small, it may also cause insufficient power storage. You can supplement the power by manually on the chain, and then observe whether the phenomenon of speed continues
2) insufficient power: if the quartz watch suddenly finds that it is slow, it may be caused by insufficient battery energy, you can send the watch to a special maintenance point to check the power
3) have been hit or hit: the watch is very tight. If it is hit or hit, it may cause internal parts loose and damage, and it may also cause travel time problems. This is to be dealt with in time
4) maintenance required: the lack of oil in the movement or the wear and aging of internal parts may cause travel time problems, which need to be maintained and sent to the designated repair point for maintenance
5) in addition to the above common cases, the watch is magnetized e to the influence of some ambient temperature: if the hairspring of the watch is magnetized, the watch's travel time will be inaccurate.
2. < UL > < UL >
the after-sales point of Tianjin Tiansuo watch is at [136 Chifeng Road, Heping District, Tianjin - 30th floor, Tianjin international financial center]
I. The main reasons for the loss of Tiansuo watch are as follows:
-
wear of splint
-
the wear of tail hook
-
the pulling screw is loose
-
the handle is deformed and damaged
-
2. How to deal with the loss of Tisuo watch handle:
-
if the handle of Tisuo watch falls off ring wearing, we should keep it properly and send it to a professional watch repair shop in time. Don't insert it into the watch by yourself. Doing so may make the reclining wheel separate from the clutch rod, increase wear and tear, and increase trouble for future maintenance
-
and when we pull out the watch handle to pick the time, we must remember to pull it gently, or even the brand-new Tisuo watch may pull out the watch handle in the process of pulling out the watch handle
- < UL >
3. LongQin after-sales center was on the 30th floor of the financial center building of Tianjin Modern City Phase 2
the watch maintenance center is located in room 3003, 30 / F, Tianjin International Financial Center building, Heping District, Tianjin city. Here's how to speed up your watch: you can adjust the time to try. If not, go to the regular watch repair shop to let watch masters have a look, so as to avoid disorderly adjustment, resulting in short hairspring, and then repair will be more difficult
for the treatment of mechanical meter such faults, demagnetization is the first, and it is necessary to demagnetize cleanly and thoroughly; Then we need to find out the position error of the watch. If we continue to find out the hairspring and clean it with alcohol, the fuel will be clean and volatile, and the quality is poor. The fuel and magnetic field will make the hairspring show lap or attract each other. It's better to take a time test for the repaired watch, and it's better to do a long-time dynamic search. Which omni-directional rotating test stand is to be mounted, or to wear it directly? Carefully check. Those hidden deep defects, we can only use the relevant instruments to detect
main business: watch water, watch damp, watch fast, watch slow, watch stop stealthily, watch does not go, movement rust, dial rust, case rust, luminous failure, time fault, watch magnetization, back cover loose, circuit fault, return service
the watch maintenance center is located in room 3003, 30 / F, Tianjin International Financial Center building, Heping District, Tianjin city. Here's how to speed up your watch: you can adjust the time to try. If not, go to the regular watch repair shop to let watch masters have a look, so as to avoid disorderly adjustment, resulting in short hairspring, and then repair will be more difficult
for the treatment of mechanical meter such faults, demagnetization is the first, and it is necessary to demagnetize cleanly and thoroughly; Then we need to find out the position error of the watch. If we continue to find out the hairspring and clean it with alcohol, the fuel will be clean and volatile, and the quality is poor. The fuel and magnetic field will make the hairspring show lap or attract each other. It's better to take a time test for the repaired watch, and it's better to do a long-time dynamic search. Which omni-directional rotating test stand is to be mounted, or to wear it directly? Carefully check. Those hidden deep defects, we can only use the relevant instruments to detect
main business: watch water, watch damp, watch fast, watch slow, watch stop stealthily, watch does not go, movement rust, dial rust, case rust, luminous failure, time fault, watch magnetization, back cover loose, circuit fault, return service
4. You can adjust the time by yourself first. If not, go to the regular nomos customer service center [30 / F, Tianjin International Financial Center, 136 Chifeng Road, Heping District] to let watch masters have a look, so as to avoid disorderly adjustment, resulting in short hairspring, which will make it more difficult to repair
for the treatment of faults like nomos mechanical watch, demagnetization should be done first, and the demagnetization should be clean and thorough; Then we need to find out the position error of the watch. If we continue to find out the hairspring and clean it with alcohol, the fuel will be clean and volatile, and the quality is poor. The fuel and magnetic field will make the hairspring show lap or attract each other
it's better to do a timing quiz for the repaired watch, and it's better to do a long-time dynamic search, which omni-directional rotating test stand is to be put on, or to wear it directly. Those hidden deep defects, we can only use the relevant instruments to detect
5. When the watch accidentally falls to the ground, the acceleration of gravity will cause great damage to the watch. One of the possible damages is the appearance of the watch, such as knock, scratch, skew handle or broken glass; The other is inside the watch, including the deformation of the dial, the falling off of characters, the falling off of the needle, the falling off of the night light, and the falling off of the movement parts
the most delicate parts of watch movement are the balance wheel and hairspring. The reason for the cycloid is that its shaft is very thin, only about 0.10 mm. The cycloid vibrates and rotates at a high speed in the watch, and the whole mass of the cycloid depends on it. Today's brand watches are equipped with shock absorbers, which can effectively protect the balance shaft from being damaged by strong vibration
the hairspring in the movement is actually a tiny spiral spring, whose shape is called "Archimedean helix". It is made of a nickel base material with extremely complex composition. It is the most important part to maintain the mechanical vibration of the balance wheel. Its installation, adjustment, shape, clearance in the speed clip and Omega watch swing are the most critical parts to determine the travel time accuracy of the watch
the rigidity, spacing and turns of the hairspring are related to the oscillation frequency and movement size of the watch. Generally speaking, if the frequency is low or female watch, the gossamer is relatively "soft". On the contrary, the higher the frequency is, the harder the gossamer is
after a watch is dropped and touched, the hairspring is most likely to be "looped". That is to say, the inner ring of the hairspring is hung on the outer pile or speed clip of the hairspring. Usually, the watch stops or goes very fast<
nowadays, the frequency of watches is mostly the vibration frequency of
28800 /, the hairspring is relatively hard, and the spacing is small. After a watch is dropped, the hairspring is prone to deformation. The so-called deformation means that the hairspring is horizontal and vertical, so that the hairspring becomes uneven or not round
among them, the horizontal deformation is the most, and the hairspring is not concentric
in addition, it may rub against the outer pile of the hairspring in the process of wandering. Its fault performance is that the watch is easy to stop and go, and the travel time becomes faster. The specific speed depends on the degree to which the hairspring is lifted to the outer pile. In serious cases, it can be as fast as 2 hours a day
for many repaired watches (especially those with ETA movement), it is found that the hairspring is always horizontally displaced and deformed, and the second circle of the hairspring rubs against the outer pile of the hairspring. In the repair, we need to use tweezers to carefully correct the hairspring. We must make sure that it is concentric, that its pitch is flat and round
if it is found that after the watch is accidentally dropped, there is a very fast phenomenon of stopping and changing with time, it is likely that the hairspring is deformed. Of course, it is possible that other components may also fail at the same time. It's best to take it to a professional repair shop for troubleshooting and maintenance. Room 3003, 30 / F, Tianjin International Financial Center building is the largest professional watch after-sales repair shop in Tianjin.
the most delicate parts of watch movement are the balance wheel and hairspring. The reason for the cycloid is that its shaft is very thin, only about 0.10 mm. The cycloid vibrates and rotates at a high speed in the watch, and the whole mass of the cycloid depends on it. Today's brand watches are equipped with shock absorbers, which can effectively protect the balance shaft from being damaged by strong vibration
the hairspring in the movement is actually a tiny spiral spring, whose shape is called "Archimedean helix". It is made of a nickel base material with extremely complex composition. It is the most important part to maintain the mechanical vibration of the balance wheel. Its installation, adjustment, shape, clearance in the speed clip and Omega watch swing are the most critical parts to determine the travel time accuracy of the watch
the rigidity, spacing and turns of the hairspring are related to the oscillation frequency and movement size of the watch. Generally speaking, if the frequency is low or female watch, the gossamer is relatively "soft". On the contrary, the higher the frequency is, the harder the gossamer is
after a watch is dropped and touched, the hairspring is most likely to be "looped". That is to say, the inner ring of the hairspring is hung on the outer pile or speed clip of the hairspring. Usually, the watch stops or goes very fast<
nowadays, the frequency of watches is mostly the vibration frequency of
28800 /, the hairspring is relatively hard, and the spacing is small. After a watch is dropped, the hairspring is prone to deformation. The so-called deformation means that the hairspring is horizontal and vertical, so that the hairspring becomes uneven or not round
among them, the horizontal deformation is the most, and the hairspring is not concentric
in addition, it may rub against the outer pile of the hairspring in the process of wandering. Its fault performance is that the watch is easy to stop and go, and the travel time becomes faster. The specific speed depends on the degree to which the hairspring is lifted to the outer pile. In serious cases, it can be as fast as 2 hours a day
for many repaired watches (especially those with ETA movement), it is found that the hairspring is always horizontally displaced and deformed, and the second circle of the hairspring rubs against the outer pile of the hairspring. In the repair, we need to use tweezers to carefully correct the hairspring. We must make sure that it is concentric, that its pitch is flat and round
if it is found that after the watch is accidentally dropped, there is a very fast phenomenon of stopping and changing with time, it is likely that the hairspring is deformed. Of course, it is possible that other components may also fail at the same time. It's best to take it to a professional repair shop for troubleshooting and maintenance. Room 3003, 30 / F, Tianjin International Financial Center building is the largest professional watch after-sales repair shop in Tianjin.
6. 1. The allowable error of Cartier mechanical watch is about 30-45 seconds per day, and that of Cartier quartz watch is about 15-30 seconds, but the specific error may also be related to the environment and temperature. So Cartier Watch in the daily wearing process of small errors can be understood, you do not fret
2. The Cartier Watch should not touch the magnetic field ring wearing, or it should be placed next to the electrical appliances or magnetic objects that can generate the magnetic field. This may lead to inaccurate travel time and even abnormal operation of the Cartier Watch. The Cartier Watch must stay away from the magnetic field
3. The wearer of Cartier mechanical watch needs to proce enough swing to "power up" the spring of Cartier Watch. If you don't take it with you at night, you can swing the Cartier mechanical watch repeatedly for about 1 minute to supplement the kinetic energy, so as to ensure the accuracy of the next time when you wear it. Cartier quartz watches need regular battery replacement and watch maintenance
4. The incorrect travel time of Cartier mechanical watch is more likely to be caused by the collision of Cartier Watch, dislocation of movement gear, magnetization of watch, long shelf time and dry grease. Warm reminder: in the process of wearing Cartier Watch, we must avoid bumping and shelving for a long time<
maintenance of Cartier Watch out of time:
1
2. If you don't know why the Cartier Watch is out of time, it is recommended that you send the Cartier Watch to a professional maintenance center for fault detection. Professional testing for Cartier Watch, room 3003, 30 / F, Tianjin International Financial Center building, do not disassemble and test by yourself!
2. The Cartier Watch should not touch the magnetic field ring wearing, or it should be placed next to the electrical appliances or magnetic objects that can generate the magnetic field. This may lead to inaccurate travel time and even abnormal operation of the Cartier Watch. The Cartier Watch must stay away from the magnetic field
3. The wearer of Cartier mechanical watch needs to proce enough swing to "power up" the spring of Cartier Watch. If you don't take it with you at night, you can swing the Cartier mechanical watch repeatedly for about 1 minute to supplement the kinetic energy, so as to ensure the accuracy of the next time when you wear it. Cartier quartz watches need regular battery replacement and watch maintenance
4. The incorrect travel time of Cartier mechanical watch is more likely to be caused by the collision of Cartier Watch, dislocation of movement gear, magnetization of watch, long shelf time and dry grease. Warm reminder: in the process of wearing Cartier Watch, we must avoid bumping and shelving for a long time<
maintenance of Cartier Watch out of time:
1
2. If you don't know why the Cartier Watch is out of time, it is recommended that you send the Cartier Watch to a professional maintenance center for fault detection. Professional testing for Cartier Watch, room 3003, 30 / F, Tianjin International Financial Center building, do not disassemble and test by yourself!
7.
88层
{RRRR}
8. Tianjin Chopin after-sales service center is located in [No.136 Chifeng Road, Heping District - 30th floor, Tianjin international financial center]
when Chopin watch gets into water, it should be done as follows:
the fog can be removed by sunning. First, open the back cover of Chopin's watch, then wrap the watch completely with a paper towel or a moisture absorbing flannel, and take it to the sun for more than half a day, or remove the moisture from the movement
when Chopin's watch is flooded with water, open the back cover of the watch, remove the battery, and use the low-temperature gear of the hair dryer to blow at the watch. After blowing completely dry, install the back cover again. During the installation, you can also check whether the sealing ring is aging and broken. If it is intact, remember to fasten the back cover
when Chopin's watch gets into the water and fog, the simplest way is to put it on his wrist, that is, let the reflection of the watch cover face inward and the bottom shell of the watch face outward. After a few hours, you will find less and less water in the watch
prepare a lot of paper towels or moisture absorbing flannels, wrap Chopin's watch tightly, place it about 5cm away from the 40 Watt lamp bulb, and bake it for about half an hour by baking. After that, you will find that the moisture of the movement is slowly disappearing
dry the granules with silica gel. Put the silica gel granule into a sealed container together with the Chopin watch that has accumulated water. After a few hours, take out the watch, and the water will disappear completely.
when Chopin watch gets into water, it should be done as follows:
the fog can be removed by sunning. First, open the back cover of Chopin's watch, then wrap the watch completely with a paper towel or a moisture absorbing flannel, and take it to the sun for more than half a day, or remove the moisture from the movement
when Chopin's watch is flooded with water, open the back cover of the watch, remove the battery, and use the low-temperature gear of the hair dryer to blow at the watch. After blowing completely dry, install the back cover again. During the installation, you can also check whether the sealing ring is aging and broken. If it is intact, remember to fasten the back cover
when Chopin's watch gets into the water and fog, the simplest way is to put it on his wrist, that is, let the reflection of the watch cover face inward and the bottom shell of the watch face outward. After a few hours, you will find less and less water in the watch
prepare a lot of paper towels or moisture absorbing flannels, wrap Chopin's watch tightly, place it about 5cm away from the 40 Watt lamp bulb, and bake it for about half an hour by baking. After that, you will find that the moisture of the movement is slowly disappearing
dry the granules with silica gel. Put the silica gel granule into a sealed container together with the Chopin watch that has accumulated water. After a few hours, take out the watch, and the water will disappear completely.
Hot content