Feixun cloud computing power

1.

Feixun K2 is a Gigabit router, which needs to be connected with Gigabit cable. Gigabit network card is Gigabit. If you connect with 100m network card or 100m network cable, it will become 100m

fisun K2 is a al band router (2.4G: 300mbps, 5g: 867mbps) with a maximum transmission rate of 1200mbps, but its WAN port and LAN port support 100m at most, so even if your bandwidth is 200m, the router can only use 100m at most. But also need more than six types of network cable

The difference between 100m router and Gigabit router lies in the total amount of data transmission. For example, if only one computer is connected, a 100 megabyte router can transmit 100 megabytes of data per second, while a Gigabit router can transmit 1000 megabytes of data per second. If there are two, 100 trillion is only 50 trillion, and 1000 trillion is 500 trillion. The actual amount of data transmitted is determined by the network. Except for optical fiber, indivials generally do not reach the total amount of transmission of routers

extended data

a high-performance router with system throughput of thousands of megabits per second or higher, from the external point of view, its function is actually consistent with that of the traditional router, and the most important feature is high speed

The demand of Internet for high bandwidth and quality of service, together with the development of network processor technology and transmission technology, leads to the concept of Gigabit line speed router and proces practical procts

2. I have registered many times, one of which was registered by blind cat, but later I wanted to log in again for follow-up management. But I couldn't make it. Is unable to obtain the verification code!

3. First, check whether the IP of the wireless router and the cat conflict. If it is the same (conflict), connect to the computer through the LAN port of the wireless router and modify the IP, such as 192.168.5.1, remember. Just save it
then connect the cat settings
detailed setting search:
how to set up the FICOMM wireless router

4. Hello
please set the computer to get IP address automatically! If not, is the wireless network card normal? Remove the wireless network card driver and try to re install it!

5. Signal: 618 stronger, 4 antennas. 712 al antennas. Transmission speed: 750m for 712 and 600m for 518. 712 is better than 618. It depends on your needs. If you have more walls to wear, 618. If you don't consider the signal strength, 712 is better.

6. If you want to access the Internet directly, you need to have a public IP for your broadband. If you don't have a public IP, you can only use FRP to penetrate the intranet. It's like that the k3c official firmware has a FRP intranet penetration plug-in. You can find it yourself.

7. At present, the software only supports Android programs. You need to prepare a mobile phone with Android system to download APK software from the official website of fisun. The specific location is in the "Download Center". There is a driver to download, and its name is "fisun smart Internet cloud wayou application 3.01" (3.01 is the version number, and the later version will be different)

8. Brush a ROM again or go to the official website to download the rescue brick package and brush again.

9. Unknown_Error

10.

Wireless router relay tutorial:

setting method:

1. Set router 2 first, connect to the computer, input the management IP address, and enter the router background

2. Go to the infinite network setting menu

Set up SSID, channel, encryption type (WPA is the most secure), password and other information

4. Enter the DHCP menu, manually turn off the DHCP function, save successfully, and restart the router for standby

5. Enter the management IP of router 1 and log in to the background

6. When entering the unlimited setting, all the settings of router 1 must be exactly the same as those of router 2. Finally, check "turn on WDS" and enter the SSID and BSSID (MAC address) of the unlimited router to be bridged

7. If you don't know, click "search", scan nearby signals, select the name of router 2 just configured, click "connect", SSID and BSSID will be imported automatically