How can I get to Xi'an Qinhan new city examination center
Publish: 2021-05-10 06:18:29
1.
bus line: Cixi 293, the whole journey is about 29.1km
1. Take Cixi 293 from Guanhaiwei Bus Center Station, pass 49 stops, and reach Yuyao north station
2.
bus line: Cixi 226 Road, the whole journey is about 27.8km
1. Walk about 340m from Guanhaiwei town to Guanhaiwei bus central station
2. Take Cixi 226 Road, pass 43 stops, and reach Cixi West Passenger Station
3. Walk about 50m to Cixi west station
3. The code in the lower left corner of RMB is allocated ring proction, just like a person's ID card, which is unique and can be used as an anti-counterfeiting code. If there are two banknotes with the same code, one of them must be fake.
4. Enter the router interface and go down to "advanced settings"
check whether there is DNS in the "manually set DNS server" item,
if the router automatically obtains DNS, then it is obvious that DNS has been tampered with,
If DNS is manually set, you should carefully check whether the DNS is set by yourself
if it is not set by yourself, it means that DNS has been hijacked
as long as you manually change the DNS server address provided by the operator,
General Telecom's address is 202.96.134.133 or 202.96.128.166,
you can also remove the check in front of "manually set DNS server",
click the Save button below, and then change to automatically obtain DNS.
check whether there is DNS in the "manually set DNS server" item,
if the router automatically obtains DNS, then it is obvious that DNS has been tampered with,
If DNS is manually set, you should carefully check whether the DNS is set by yourself
if it is not set by yourself, it means that DNS has been hijacked
as long as you manually change the DNS server address provided by the operator,
General Telecom's address is 202.96.134.133 or 202.96.128.166,
you can also remove the check in front of "manually set DNS server",
click the Save button below, and then change to automatically obtain DNS.
5. This is the use of software or virus MAC camouflage deception to steal traffic or other purposes. Just make a static ARP, that is to say, the MAC address of the server and the router of the gateway are bound in both directions. Don't worry about router hijacking or being disguised again. If there are many computers connected by routes, it is best to use 360 to turn on ARP LAN protection. Of course, you can also upgrade the router firmware to solve the problem directly! It's kidnapping your router. According to the routing protocol, the packets that should have been sent to address a are restricted and forced to be sent to address B. the host of address B may be the puppet of the person who put the virus. If you force your packets, you can't receive them. If further use, it is possible to analyze your useful information. Landlord: I suggest you download anti-virus software 360 series or Jinshan series procts, it is not a matter to deal with the above problems! I hope you are satisfied. Thank you.
6.
Router hijacking usually uses router weak password to brutally crack the password of the router, change the DNS of the router, and achieve the purpose of pop-up ads or hijacking specific websites
if the computer appears abnormal advertisement, but the computer itself is anti-virus and non-toxic, we should consider this situation. When the router hijacks, we can restore the factory settings of the router, reset the management password, and then use the DNS optimization function in Tencent computer housekeeper toolbox to reset DNS directly, and then we can repair it
7. Reset the router, modify the original user name and password, and bind the IP address and MAC address< First, reset the router:
the solution to the abnormal router setting:
① after pressing (holding for 5 seconds) the reset button of the router, wait until all the indicators are on together, and the reset is successful
② after the reset is successful, you need to set the router again (with wizard), because it has been restored to the factory default value< Second, change the login user name and password:
the router's account and password are generally: admin (there are also: guest, root)
Modify login password: system tools → modify login password
or you can check the manual and the bottom of the router. For example, IP address: 192.168.1.1
if you forget after changing the router setting interface, you can click Reset router button to restore the original password
the steps to modify the router wireless password are:
wireless settings → wireless security settings → PSK password → modify password → save (note that after modification, the computer needs to re create the connection and use the new password)
wireless password and router login password are two different things< Third, bind IP address and MAC address:
first, you should know the MAC address (unique) of your client (computer, mobile phone, etc.). Start → run → input: CMD click OK (or press enter) to open the command prompt window< Then, in the command prompt window, enter: ipconfig / all → (press enter to execute the command)
③ in the pop-up message, find the physical address (12 digits) of the corresponding device (wired or wireless), which is the MAC address (unique) of the network card
④ then, enter the IP address of the login router (usually on the back of the router) in the address bar of the browser to enter the setting interface
⑤ generally, the default login user name and password (prompted on the back of the router) are admin → OK< (6) enter the router setting interface → IP and MAC binding
⑦ click enable → save, and then the created rules will take effect (see the description in red)< After the MAC binding function is turned on, click add a single entry< According to the MAC address of the device obtained before, fill in the MAC address bound by the router → save< If prompted, MAC address string is not long enough!, There should be a minus sign between the two digits (you can refer to the display of the command prompt to fill in)< br />⑪ Automatically jump after binding successfully. Don't forget to click on the webpage to successfully open the webpage, which means that the binding is successful. Otherwise, it means that the MAC address is not filled in correctly and other errors, and it should be filled in and set again.
the solution to the abnormal router setting:
① after pressing (holding for 5 seconds) the reset button of the router, wait until all the indicators are on together, and the reset is successful
② after the reset is successful, you need to set the router again (with wizard), because it has been restored to the factory default value< Second, change the login user name and password:
the router's account and password are generally: admin (there are also: guest, root)
Modify login password: system tools → modify login password
or you can check the manual and the bottom of the router. For example, IP address: 192.168.1.1
if you forget after changing the router setting interface, you can click Reset router button to restore the original password
the steps to modify the router wireless password are:
wireless settings → wireless security settings → PSK password → modify password → save (note that after modification, the computer needs to re create the connection and use the new password)
wireless password and router login password are two different things< Third, bind IP address and MAC address:
first, you should know the MAC address (unique) of your client (computer, mobile phone, etc.). Start → run → input: CMD click OK (or press enter) to open the command prompt window< Then, in the command prompt window, enter: ipconfig / all → (press enter to execute the command)
③ in the pop-up message, find the physical address (12 digits) of the corresponding device (wired or wireless), which is the MAC address (unique) of the network card
④ then, enter the IP address of the login router (usually on the back of the router) in the address bar of the browser to enter the setting interface
⑤ generally, the default login user name and password (prompted on the back of the router) are admin → OK< (6) enter the router setting interface → IP and MAC binding
⑦ click enable → save, and then the created rules will take effect (see the description in red)< After the MAC binding function is turned on, click add a single entry< According to the MAC address of the device obtained before, fill in the MAC address bound by the router → save< If prompted, MAC address string is not long enough!, There should be a minus sign between the two digits (you can refer to the display of the command prompt to fill in)< br />⑪ Automatically jump after binding successfully. Don't forget to click on the webpage to successfully open the webpage, which means that the binding is successful. Otherwise, it means that the MAC address is not filled in correctly and other errors, and it should be filled in and set again.
8. In the dcpro platform, access to the fund is safe, the platform is regular, and the payment is fast. I can't believe it. I don't have to say.
9. In case of router hijacking, you can restore the router to its factory settings, reset the
management password, and then use the DNS optimization function in Tencent's computer manager toolbox to reset DNS directly. And then we kill the virus
1. Install Tencent computer housekeeper anti-virus software first
2. Enter the safe mode to completely check and kill the virus
3. According to the scanning results, follow the prompts
management password, and then use the DNS optimization function in Tencent's computer manager toolbox to reset DNS directly. And then we kill the virus
1. Install Tencent computer housekeeper anti-virus software first
2. Enter the safe mode to completely check and kill the virus
3. According to the scanning results, follow the prompts
Hot content