Machining center to product iron cutting

1. There are many ways to remove rust: first, acid pickling corrodes iron through hydrochloric acid, and the whole surface of the workpiece is corroded with iron oxide; second, polishing is carried out by high-speed rotation of polishing wheel on the polishing machine, and iron oxide is stripped from the workpiece body; third, sanding is carried out by rubbing iron oxide from the workpiece body with various particle sizes of sandpaper; fourth, finishing is carried out by rolling friction between abrasive and workpiece in the polishing machine Remove iron oxide on the surface of workpieces for the fifth cutting reason of using machine tools to process various kinds of cutting tools (including grinding wheel, milling cutter, file, etc.) workpiece surface materials have advantages and disadvantages. It should be considered comprehensively according to the accuracy of workpieces, the appropriate resources, the number of workpieces and the cost of rust removal. I hope to find a suitable way. I hope my answer will be helpful

2. What do you want to do? Just climb in and clear out

3. Unknown_Error

4. I used to make aluminum alloy materials. I used to grind the knife. I did my own research. Now basically, I never wound aluminum chips on the knife

5. Piece, strip, roll

6. Do not use g81, use G73 or g83 to rece Q value.

7. The drill bit is not well ground

8. The main function of the chip conveyor is to discharge the debris, but some fine granular impurities will slip away with the chip conveyor, which is a common problem; So how to solve it Yantai new Xiangyu filter equipment] technical solution: add paper tape filter equipment to clean the fine particles, so that the cutting fluid can be very clean, without affecting the accuracy of the cutting fluid and processing workpiece
2, add magnetic separator or other solid-liquid separation equipment, the same purpose is to make the cutting fluid clean