Which international financial center building 2 to go to for Che
Publish: 2021-05-14 19:07:00
1. The reason why the watch is not in time
1. External influence: all kinds of influences from the outside of the clock, depending on the working environment of the clock
2. Fast slow needle: fast slow needle is an economic structure that is convenient for timing, but both theory and practice have proved that it will affect the isochronicity of the system, and may also proce potential difference. These timing errors are relatively random and cannot be compensated or offset
3. Friction: friction usually has positive and negative effects, such as friction wheel, friction between automatic watch spring and strip box, screw self-locking, etc; On the other hand, friction will lead to the rection of transmission efficiency and the friction loss of parts, thus affecting the timing
4. Escapement: the impact of escapement is mainly the impact on the cycloidal hairspring system in the process of energy transfer. The cycloidal hairspring system can maintain a fixed vibration frequency only in the case of free vibration. Obviously, the energy transfer process of escapement will affect the vibration frequency. The theory shows that when the transmission process is close to the balance point of the balance wheel, the influence will be reced
5. Temperature influence: the influence of temperature is mainly manifested in two aspects: first, the temperature change will change the working length of the hairspring, and change the inertia of the balance wheel, which can directly affect the timing accuracy; Secondly, the temperature change will affect the viscosity of the lubricating oil, affect the transmission efficiency, and thus affect the timing
6. Magnetic field: the hairspring which is most affected by the magnetic field can change its elastic molus, and also deform the hairspring under the action of the magnetic field, resulting in additional stress. In severe cases, the magnetic field can cause adhesion of the hairspring and seriously affect the travel time
7. Balance of hairspring: the center of gravity of the general swing frame hairspring changes with the change of the swing angle of the balance wheel. Under the action of gravity, it will proce position error
8. Balance of the balance wheel: the balance of the balance wheel elements directly affects the bit difference, and the static balance of the balance wheel elements is a basic requirement.
1. External influence: all kinds of influences from the outside of the clock, depending on the working environment of the clock
2. Fast slow needle: fast slow needle is an economic structure that is convenient for timing, but both theory and practice have proved that it will affect the isochronicity of the system, and may also proce potential difference. These timing errors are relatively random and cannot be compensated or offset
3. Friction: friction usually has positive and negative effects, such as friction wheel, friction between automatic watch spring and strip box, screw self-locking, etc; On the other hand, friction will lead to the rection of transmission efficiency and the friction loss of parts, thus affecting the timing
4. Escapement: the impact of escapement is mainly the impact on the cycloidal hairspring system in the process of energy transfer. The cycloidal hairspring system can maintain a fixed vibration frequency only in the case of free vibration. Obviously, the energy transfer process of escapement will affect the vibration frequency. The theory shows that when the transmission process is close to the balance point of the balance wheel, the influence will be reced
5. Temperature influence: the influence of temperature is mainly manifested in two aspects: first, the temperature change will change the working length of the hairspring, and change the inertia of the balance wheel, which can directly affect the timing accuracy; Secondly, the temperature change will affect the viscosity of the lubricating oil, affect the transmission efficiency, and thus affect the timing
6. Magnetic field: the hairspring which is most affected by the magnetic field can change its elastic molus, and also deform the hairspring under the action of the magnetic field, resulting in additional stress. In severe cases, the magnetic field can cause adhesion of the hairspring and seriously affect the travel time
7. Balance of hairspring: the center of gravity of the general swing frame hairspring changes with the change of the swing angle of the balance wheel. Under the action of gravity, it will proce position error
8. Balance of the balance wheel: the balance of the balance wheel elements directly affects the bit difference, and the static balance of the balance wheel elements is a basic requirement.
2. Headquartered in Shanghai, Shanghai Cartier service center has set up maintenance service centers in large and medium-sized cities across the country, forming a huge watch maintenance service network, providing convenient and fast watch maintenance services for consumers!
3. Swindlers come here. Many people have been cheated
4. Peinahai watch in peacetime should also pay attention to maintenance, in order to rece damage and prolong the life of the watch
be careful not to open the back cover of the watch at will, in order to avoid st entering the movement and affecting the normal operation of the watch
be careful not to put the watch in the wardrobe with camphor pills to avoid the deterioration of the watch oil
do not put the watch on the power amplifier, audio or TV to avoid magnetization
watches that are not worn for a long time should be wound once a month, while watches with automatic movement should be wound automatically by swinging back and forth for a few minutes or wearing them on the wrist for a period of time. So that the parts will not be at rest for a long time, to ensure the operation performance of the meter machine.
be careful not to open the back cover of the watch at will, in order to avoid st entering the movement and affecting the normal operation of the watch
be careful not to put the watch in the wardrobe with camphor pills to avoid the deterioration of the watch oil
do not put the watch on the power amplifier, audio or TV to avoid magnetization
watches that are not worn for a long time should be wound once a month, while watches with automatic movement should be wound automatically by swinging back and forth for a few minutes or wearing them on the wrist for a period of time. So that the parts will not be at rest for a long time, to ensure the operation performance of the meter machine.
5. Hello, after inquiry, Hongxing Road did not find any outlets of our bank. For the specific information of outlets, you can log in to our official website and select the service outlets to check whether there are nearby outlets.
6. Qing Cartier maintenance center is located in room 2204, 22 / F, block B, China Resources Building, No.6 Shandong Road, Shinan District, Qing City, Shandong Province, Most of the reasons for the slow movement of automatic mechanical watch are e to the lack of wearing time or the arm does not maintain the normal amount of movement, so it can be directly on the chain manually to supplement power
2. There is no maintenance. The mechanical watch is generally maintained once every two to three years. If the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction between the gears will proce iron filings, which will increase the friction between the gears. This kind of problem only needs to clean the movement and refuel
3. The structure of mechanical watch is complex, and it is composed of hundreds of precision parts, which is very fragile. When the watch is strongly impacted, the parts in the movement may become loose, causing the watch to slow down or stop. According to the watch slow reasons to take appropriate measures can be, manual machinery pay attention to the winding, automatic mechanical arm to maintain the normal amount of movement, maintenance on time, pay attention to watch waterproof, shockproof and antimagnetic, problems timely repair
the watch should be maintained every 1-4 years, the waterproof components should be replaced, the travel time function and movement power consumption should be tested, the movement should be cleaned and the appearance should be maintained. Such maintenance service will effectively extend the service life of your mechanical watch.
2. There is no maintenance. The mechanical watch is generally maintained once every two to three years. If the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction between the gears will proce iron filings, which will increase the friction between the gears. This kind of problem only needs to clean the movement and refuel
3. The structure of mechanical watch is complex, and it is composed of hundreds of precision parts, which is very fragile. When the watch is strongly impacted, the parts in the movement may become loose, causing the watch to slow down or stop. According to the watch slow reasons to take appropriate measures can be, manual machinery pay attention to the winding, automatic mechanical arm to maintain the normal amount of movement, maintenance on time, pay attention to watch waterproof, shockproof and antimagnetic, problems timely repair
the watch should be maintained every 1-4 years, the waterproof components should be replaced, the travel time function and movement power consumption should be tested, the movement should be cleaned and the appearance should be maintained. Such maintenance service will effectively extend the service life of your mechanical watch.
7. Guangcheng watch maintenance center can be maintained. I remember it is on the first floor of No.1 Minquan Road (opposite the east gate of Zhong building).
8. Unknown_Error
9. You can get a large professional regular watch repair shop to repair, usually in the downtown area of the city, or look for some relatively large shopping malls and high-end office buildings, which generally have watch repair shops
the cleaning and lubricating oil injection of watch movement is a very important work in watch repair. The purpose of oil washing is to keep watch parts clean and necessary lubrication of machine parts, so as to ensure the precision of watch parts, improve the travel time precision of watch and extend the service life of watch. Under normal circumstances, the general meter machine use two years later wash oil once. Under normal circumstances, oil washing is often carried out at the same time as adjusting and repairing parts. In addition, when checking the malfunction of the meter, it is necessary to wash the oil when the following problems are found:
a. the lubricating oil in the movement dries up or becomes sticky. This will increase the resistance of the movement of the parts and make the travel time of the meter machine inaccurate
B. there is too much lubricating oil in the meter machine. This will cause the oil to overflow everywhere and pollute the parts, especially the escapement speed regulating mechanism, so that the meter stops or is obviously not allowed to move.
C. foreign matters such as st particles, metal particles, fiber particles enter the movement. This will cause the transmission mechanism of the meter machine to be blocked, and make the meter machine travel inaccuracy or even stop
D, and the machine parts rust.
the cleaning and lubricating oil injection of watch movement is a very important work in watch repair. The purpose of oil washing is to keep watch parts clean and necessary lubrication of machine parts, so as to ensure the precision of watch parts, improve the travel time precision of watch and extend the service life of watch. Under normal circumstances, the general meter machine use two years later wash oil once. Under normal circumstances, oil washing is often carried out at the same time as adjusting and repairing parts. In addition, when checking the malfunction of the meter, it is necessary to wash the oil when the following problems are found:
a. the lubricating oil in the movement dries up or becomes sticky. This will increase the resistance of the movement of the parts and make the travel time of the meter machine inaccurate
B. there is too much lubricating oil in the meter machine. This will cause the oil to overflow everywhere and pollute the parts, especially the escapement speed regulating mechanism, so that the meter stops or is obviously not allowed to move.
C. foreign matters such as st particles, metal particles, fiber particles enter the movement. This will cause the transmission mechanism of the meter machine to be blocked, and make the meter machine travel inaccuracy or even stop
D, and the machine parts rust.
Hot content