Chengdu Yingnage repair to the second building of the internatio

1. 1. If you are wearing a belt watch, the leather watch should avoid contact with water as far as possible, so as to avoid the strap becoming hard and smelly, which may lead to fracture
2. The automatic watch must be worn for more than 8 hours a day under the condition of sufficient activity. If you wear it for the first time or lack of momentum, you need to fill the string manually (generally 30 turns are regarded as full string). If the watch is abnormal, you should immediately send it to a special watch shop for inspection. Or contact the after-sales department for handling
3. Because the internal mechanical structure of each watch is different, in normal use, the error of mechanical watch or automatic watch is 30 seconds per day, while the error of quartz watch is lower and more accurate. The common method of calibration is to use the semiconctor radio, which is more accurate.

2. Method 1: put the mechanical watch on the wrist with the bottom shell facing outward and cover it inside, and the water vapor can be eliminated after two hours. If the water is serious, it's better to send it to the meter shop to wipe oil immediately to remove the moisture of the movement, so as to avoid parts rusting
method 2: if the mechanical watch is soaked in water, it can be tightly wrapped with several layers of toilet paper or absorbent flannelette, placed about 15 cm near the 40 Watt lamp bulb, and baked for about 30 minutes to eliminate the moisture in the watch. Do not bake the watch cover close to the fire, so as not to deform the watch cover. If there is water in the watch, you still have to go to the repair shop to wipe oil for maintenance to prevent the parts inside from rusting
method 3: put the watch with granular silica gel into a closed container together with the watch that has accumulated water. After a few hours, take out the watch and the water will disappear. This method is simple and economical, and has no damage to the accuracy and life of the meter. The silica gel that has absorbed water for many times can be dried at 120 ℃ for several hours. The water absorption capacity is renewable and can be used repeatedly
if the mechanical watch is affected with damp, the best way is to go to the watch repair shop for inspection and oiling, which can prevent serious corrosion and corrosion of the watch with less cost. If the movement is rusted, the watch will lose a lot if it is scrapped. It is very important to take precautions

3. 1. Please use and adjust the watch correctly. Before the first use of the automatic mechanical watch, it must be on the chain first, but remember not to overload the chain, so as not to damage the movement and block the machine. Pay attention to adjust the handle of the watch, gently dial and gently push, not forcefully. After the adjustment, it is necessary to confirm that it is sent back, so as to avoid the waterproof failure caused by not tightening the handle
2. All mechanical watches have a running in period. In the running in period, if there is a positive and negative difference within 24 hours for one minute, it is normal. After the running in period, it will enter a stable stage and then make secondary adjustment! Running in period is generally set to three months! Adjustment can be sent to the local table bank, or contact customer service to send back the adjustment
3. For the multi-functional type, please do not press the head of the code meter at will, and do not press it too continuously! Multi menu in the chain is too full can not use the code table function, crystal sapphire glass can not with diamond or glass friction! If you are not sure or have any questions, please contact customer service in time
4. calendar watch timing method: A. first pull the watch out to the timing position, adjust the needle in time to the end of the day, this time is 24 hours at night, if the adjustment is made before 12 noon, please adjust the time points to the required time. If it is adjusted at 12 noon, please adjust the time to the time required. B. Use the quick dial button to adjust the calendar, week calendar to the required date, week. C. It is allowed to change the calendar within 4 hours after changing the calendar. D. The single calendar watch is not allowed to use the quick pull button to adjust the day from 11:00 to 1:00 every night. Double calendar watches are not allowed to use the quick pull button to adjust the day from 11:00 to 5:00 every night.

4. How to deal with the wear of watch mirror:
the watch can be used temporarily when it is scratched or cracked by the key. But for the precision operation of the watch, at this time the watch waterproof and st performance will decline, should be replaced as soon as possible to professional watch shop. When there are scratches or slight scratches on the surface of the watch, you can first drop one or two drops of water on the surface of the watch, then squeeze a little toothpaste on it, and then wipe it back and forth with a cotton ball to remove the scratches and make the watch as if it were new
as for severe damage, such as bursting, corner chipping and serious damage, when debris is covered on the dial, the following measures should be taken immediately: the first thing is to stop the watch. Pull out the handle and stop the watch. Pull out the watch handle to stop the watch and prevent the pointer from scratching the dial and calendar e to glass debris. Never dial the needle or adjust the calendar quickly, or try to remove the broken glass from the dial. When sending the watch to the clock shop for repair, the watch needs to be placed horizontally (preferably with the glass facing down) into the packing box, and there should be no violent vibration and shaking on the way. In the process of maintenance, the maintenance personnel should be told not to let the glass fragment hurt the dial and the needle

5. It is recommended that you send professional large-scale clocks for inspection and maintenance
or it is suggested that you can open the warranty sheet attached to the purchase form. Normally, there will be a service address and telephone number on the warranty sheet. You can call to find out where the nearest repair point is

6. It is recommended that you send professional large-scale clocks for inspection and maintenance. Or you can open the warranty sheet attached to the purchase form. Under normal circumstances, there will be a service address and telephone number on the warranty sheet. You can call to ask where the nearest maintenance point is. Just choose the one close to you