Chengdu Wanguo watch maintenance to which international financia
Publish: 2021-04-14 21:14:35
1. Hello, it is suggested that you can open the warranty sheet attached to the meter. Normally, there will be a service address on the warranty sheet, or you can find the address of a regular watch Service Center for inspection and maintenance, or you can find a professional after-sales service center nearby.
2. Wanguo's watches are different from other brands in style. Their style should be strong and masculine, and their movement quality is also very good
if your watch has not yet passed the warranty period, it is recommended that you take it to a special after-sales service center or exclusive store for warranty, which can be found in almost every provincial capital city and some other well-developed cities in China. If your watch has passed the warranty period, you can also choose some regular professional watch repair shop to repair it
you can get Guangcheng watch line. There are professional technicians and advanced maintenance instruments to protect your watch
what to do if there is water in the watch:
first, if the water is not serious, but there is a layer of fog in the watch glass, then you can wrap the watch tightly with several layers of toilet paper or absorbent flannelette, and bake it at 15cm away from the 40W light bulb for about 30 minutes to eliminate the moisture
do not bake the cover close to the fire, so as not to deform the cover when heated. It can also be worn on the wrist with the watch cover facing inside and the bottom shell facing out, and the moisture can be eliminated after two hours. If the water is serious, it's better to send it to the meter shop to wipe oil immediately to remove the moisture of the movement, so as to avoid parts rusting
2. Put the watch inside and the bottom shell out on the wrist, and the moisture can be eliminated after two hours. If the water is serious, it's better to send it to the meter shop to wipe oil immediately to remove the moisture of the movement, so as to avoid parts rusting
3. Put the watch with granular silica gel into a closed container with water accumulated. After a few hours, take out the watch and the water will disappear. This method is simple and economical, without any damage to the accuracy and life of the meter. The silica gel that has absorbed water for many times can be dried at 120 ℃ for several hours. The water absorption capacity is renewable and can be used repeatedly
4. Put it in a rice VAT and bury it deep in the dry rice for a period of time. If it's fast, you can see the obvious effect in one night
5. Before going to bed at night, put your watch on the TV, table or other places in the room. However, do not leave it in a well ventilated room (it is better not to open windows), because the humidity of the room is relatively low at night, and it is easy to evaporate the water< 6. It is better to seal the watch with granular dry material and take out the watch after a few hours to remove the water in the watch
7. To wear it in reverse is to put the words on the skin.
if your watch has not yet passed the warranty period, it is recommended that you take it to a special after-sales service center or exclusive store for warranty, which can be found in almost every provincial capital city and some other well-developed cities in China. If your watch has passed the warranty period, you can also choose some regular professional watch repair shop to repair it
you can get Guangcheng watch line. There are professional technicians and advanced maintenance instruments to protect your watch
what to do if there is water in the watch:
first, if the water is not serious, but there is a layer of fog in the watch glass, then you can wrap the watch tightly with several layers of toilet paper or absorbent flannelette, and bake it at 15cm away from the 40W light bulb for about 30 minutes to eliminate the moisture
do not bake the cover close to the fire, so as not to deform the cover when heated. It can also be worn on the wrist with the watch cover facing inside and the bottom shell facing out, and the moisture can be eliminated after two hours. If the water is serious, it's better to send it to the meter shop to wipe oil immediately to remove the moisture of the movement, so as to avoid parts rusting
2. Put the watch inside and the bottom shell out on the wrist, and the moisture can be eliminated after two hours. If the water is serious, it's better to send it to the meter shop to wipe oil immediately to remove the moisture of the movement, so as to avoid parts rusting
3. Put the watch with granular silica gel into a closed container with water accumulated. After a few hours, take out the watch and the water will disappear. This method is simple and economical, without any damage to the accuracy and life of the meter. The silica gel that has absorbed water for many times can be dried at 120 ℃ for several hours. The water absorption capacity is renewable and can be used repeatedly
4. Put it in a rice VAT and bury it deep in the dry rice for a period of time. If it's fast, you can see the obvious effect in one night
5. Before going to bed at night, put your watch on the TV, table or other places in the room. However, do not leave it in a well ventilated room (it is better not to open windows), because the humidity of the room is relatively low at night, and it is easy to evaporate the water< 6. It is better to seal the watch with granular dry material and take out the watch after a few hours to remove the water in the watch
7. To wear it in reverse is to put the words on the skin.
3. If your watch is still under warranty, it is recommended that you take it to a special after-sales service center for warranty. You can check the warranty card attached with your watch, which has the address and telephone number; If your watch has passed the warranty period, you can also choose to get some large regular watch repair shops to repair it
watch magnetization treatment:
the post-treatment of the watch magnetization is very simple. Take it to the customer service center or the armband master, do not open the cover, and directly use the degausser for degaussing, so that the watch's travel time can return to normal in 2 seconds. If you want to do degaussing yourself, watch home summarizes the online watch degaussing tips for your reference
1. Find an iron ring that is not magnetized, put the watch in the ring and wear it slowly. After a few minutes, the watch will be demagnetized and restored
2. The effective part of the surface of the inction cooker is generally round, and the coil is below it. If you don't put enough steel objects, it will generally automatically protect from starting. We'd better find a steel water cup (represented by a red circle) to fill with water, or any other steel container. In short, don't cover the center of the inction cooker, and it's enough to start the inction cooker. Then start the inction cooker. It's better to use the maximum power to move the watch or tool to be degaussed from the far left side of the cooker close to the surface of the inction cooker, and move it through the center point of the inction cooker to the far right side. Repeat this several times. Pay attention to enter from one direction, which can play a good role in degaussing.
watch magnetization treatment:
the post-treatment of the watch magnetization is very simple. Take it to the customer service center or the armband master, do not open the cover, and directly use the degausser for degaussing, so that the watch's travel time can return to normal in 2 seconds. If you want to do degaussing yourself, watch home summarizes the online watch degaussing tips for your reference
1. Find an iron ring that is not magnetized, put the watch in the ring and wear it slowly. After a few minutes, the watch will be demagnetized and restored
2. The effective part of the surface of the inction cooker is generally round, and the coil is below it. If you don't put enough steel objects, it will generally automatically protect from starting. We'd better find a steel water cup (represented by a red circle) to fill with water, or any other steel container. In short, don't cover the center of the inction cooker, and it's enough to start the inction cooker. Then start the inction cooker. It's better to use the maximum power to move the watch or tool to be degaussed from the far left side of the cooker close to the surface of the inction cooker, and move it through the center point of the inction cooker to the far right side. Repeat this several times. Pay attention to enter from one direction, which can play a good role in degaussing.
4. Hello, if the watch doesn't go, it may be lack of power. Generally, the normal winding takes 30 times, and it is basically full. (the premise is that you have to put on a full hand.) it doesn't matter if the watch is in hand winding, as long as you can't turn it, the spring will be full
for automatic watches, most of them can be wound by hand, especially when they are worn for the first time or when they are worn after they have stopped As we all know, since the automatic watch is "not fully wound up", it is better to use more than a few more automatic watches. For example, when it reaches 40, it is basically guaranteed to be fully wound up.
for automatic watches, most of them can be wound by hand, especially when they are worn for the first time or when they are worn after they have stopped As we all know, since the automatic watch is "not fully wound up", it is better to use more than a few more automatic watches. For example, when it reaches 40, it is basically guaranteed to be fully wound up.
5. This kind of expensive watch users in the choice of maintenance point, must choose a formal professional maintenance point, in order to avoid the loss of benefits to their own and watch, and one point is also the most important, the same watch different models of the cost is also different, it is recommended to call detailed consultation.
6. International watches go fast. There are many famous watch repair shops in Cheng International Trade Building and Cheng Guihe mall. Of course, some small shops on the street have good maintenance skills as long as they have acquaintances. It's suggested that you choose a big brand maintenance organization, which is safer,
7. There are three reasons for inaccurate watch travel time:
first, lack of power
watches need different power when they travel. For example, mechanical watches store power by shaking when they are worn daily. If they are not worn for a long time and have no power, the watch will definitely stop or slow down. The manual one needs to be up and down from time to time, and some rely on the electronics to maintain rotation. Therefore, if the watch is out of time recently, it is likely that the electronics are out of power and need to be replaced
Second, external interference
this is whether you pay attention to it when you wear it in daily life. For example, watches are delicate, and it's normal for watches to be out of time if they are not waterproof, antimagnetic and shockproof. If you wear a watch that can't do strenuous exercise to play golf or badminton, the strong shock may cause damage to the parts in the watch, and the watch will not be allowed to leave
in addition, it's a clich é that watches are afraid of magnetism. If your job is to do some research, and you need to often contact with large electronic equipment, try not to wear a watch, because the surrounding magnetic field will disturb the normal walking of the watch. Some people say that the watch is bought to wear, every day baby can't, still buy it for what? It's true, but you should pay attention when wearing it
Third, proper maintenance
watches are more precise, and there are many small parts. Only when the parts fit each other can they work normally, so there is no need for friction. Therefore, all watches need to be oiled, and it will inevitably dry up after a long time. In addition, some impurities may enter the watch, which will lead to inaccurate travel time. At this time, you need to go to maintenance, Clean your watch.
first, lack of power
watches need different power when they travel. For example, mechanical watches store power by shaking when they are worn daily. If they are not worn for a long time and have no power, the watch will definitely stop or slow down. The manual one needs to be up and down from time to time, and some rely on the electronics to maintain rotation. Therefore, if the watch is out of time recently, it is likely that the electronics are out of power and need to be replaced
Second, external interference
this is whether you pay attention to it when you wear it in daily life. For example, watches are delicate, and it's normal for watches to be out of time if they are not waterproof, antimagnetic and shockproof. If you wear a watch that can't do strenuous exercise to play golf or badminton, the strong shock may cause damage to the parts in the watch, and the watch will not be allowed to leave
in addition, it's a clich é that watches are afraid of magnetism. If your job is to do some research, and you need to often contact with large electronic equipment, try not to wear a watch, because the surrounding magnetic field will disturb the normal walking of the watch. Some people say that the watch is bought to wear, every day baby can't, still buy it for what? It's true, but you should pay attention when wearing it
Third, proper maintenance
watches are more precise, and there are many small parts. Only when the parts fit each other can they work normally, so there is no need for friction. Therefore, all watches need to be oiled, and it will inevitably dry up after a long time. In addition, some impurities may enter the watch, which will lead to inaccurate travel time. At this time, you need to go to maintenance, Clean your watch.
Hot content