Jiaxing famulan service center to the 10th floor of Shanghai Hon
there are many reasons for the inaccuracy of famulan's travel time, such as collision, movement gear dislocation, watch magnetization, etc If you have any questions that you don't understand, you can click the avatar hotline]
famulan's travel time is not accurate. You should check whether the watch is stationary for a long time. The automatic watch depends on the relative motion of the swing to wind up automatically. If it is carried in the hand and is in a relatively static state for a long time, the watch can not wind up automatically, it will lose the ability to walk and stop. The user only needs to swing the watch dozens of times or several times to wind it up (when there is a hand adjustment function), and the travel time can be restored The watch is demagnetized free of charge
Hello, maybe the watch is magnetized or not powerful enough
once the magnetic field is on the watch, it will suddenly go very fast, even 1-2 hours / day fast. When wearing a mechanical watch, you should keep away from the magnetic field, such as audio, TV, mobile phone and other electrical appliances
magnetization is a common phenomenon nowadays, and the solution is not difficult. You only need to go to a famous watch for maintenance and demagnetization, or have your own degausser. It only takes 30 seconds for the watch to demagnetize, which has no effect on the performance of the watch.
Famulan customer service center is located in Shanghai / Jiujiang Road / 288 / Hongyi International Plaza / room 03, 10th floor
when the watch is accidentally dropped to the ground, or e to various collisions, the glass of the watch is damaged. Depending on the degree of damage, there are scratches, cracks, broken edges and corners, complete damage, etc. If it's just scratches and cracks, you can make do with it. Of course, the watch is not beautiful. If the edges and corners are broken or completely damaged, the glass of the watch must be replaced
Pull out the handle and stop the watchnever dial the needle or quickly adjust the calendar
keep the watch flat (preferably with the glass facing down) until you send it to the clock repair shop
there should be no violent vibration and shaking
the clock repair shop is advised not to damage the dial and needle with glass debris ring disassembly and maintenance
the principle of adjusting the time of a mechanical watch
after a long period of standing, the spring of a mechanical watch will naturally relax until the watch is still. At this time, if you want to wear it again, you must tighten the spring first, and then calibrate the time. According to the general manager, when the spring of a mechanical watch is loosest, the clock and minute hand will slow down or speed up, Therefore, the spring should be tightened first, so as to avoid that there is no standard power driven pointer after the time calibration. Even if the meter is automatically loaded, it should be manually loaded to eight minutes before time calibration
how to regularly maintain a mechanical watch
the principles of self-cleaning and maintenance of a mechanical watch are as follows: (1) wipe it with soapy water with a soft cloth; (2) wipe it with clean water with a soft cloth; (3) wipe it with a dry soft cloth; (4) dry it in the shade; (5) do not send ultrasonic waves to clean it casually.
all watches that have been engaged in water activities need to be "maintained", especially after being soaked in seawater salt, The chemicals used to filter the water in the swimming pool are easy to cause erosion and hardening of the waterproof gasket; Some maintenance can be done by yourself at home. Simply use a soft cloth to clean the metal and waterproof rubber watch strap with a small amount of soapy water. Finally, use a wet cloth to remove the traces wiped by soapy water and then dry in the shade. At the same time, do not send the watch directly to the place with ultrasonic equipment for cleaning, because ultrasonic cleaning has different frequencies, Once using the wrong ultrasonic frequency, it is easy to cause the internal parts loose.
the sooner the watch water is treated, the better. Otherwise, water will soak in the movement and the movement will rust. When the movement is rusted, the rust layer with short circuit on the surface will continue to absorb water and accelerate the rusting. If it is too late to cause internal parts damage, more maintenance costs will be required. When the wristwatch is seriously flooded, it is recommended to wash the movement oil in the official after-sales service to avoid the wristwatch being discarded e to rust. When the watch is seriously flooded, don't consider handling it by yourself. Send it to the official after-sales service immediately to wipe oil, remove the movement moisture, and avoid parts rusting. The official after-sales service professional technicians will do their best to serve you! It's the same old saying. Please don't delay repairing the watch and change it to a new one.
maintenance tips of famulan Watch:
1, do regular maintenance for the watch, do corresponding maintenance every 1 to 2 years, replace waterproof components, detect the travel time function and movement power consumption, clean the movement and maintain the appearance, etc. Such maintenance service will effectively extend the service life of your mechanical watch
2. do not put the watch on the audio or TV to prevent magnetization< Shanghai famulan watch after sales center is located on the 10th floor of Hongyi International Plaza, East Nanjing Road
3, don't open the back cover of the watch easily to prevent fine particles such as st from entering into the parts and affecting the normal operation of the watch
4, don't put the watch in the wardrobe with camphor pills to prevent the oil from degenerating
5, do not touch the watch with corrosive substances, especially acidic substances, which will corrode the watch case. When we wear a watch, the pH value of the sweat on our hands is mostly acidic, which is corrosive to the case. The whole steel case is made of nickel chromium alloy, which has better anti-corrosion function. The half steel case is made of copper. If it is touched with sweat for a long time, there will be slight corrosion. We should often use a soft cloth to wipe away the sweat to prevent it from being corroded by sweat
6. watches that have not been worn for a long time should be wound regularly once a month, while watches with automatic movement should be swung back and forth gently for several times or worn on the wrist for a period of time, so that they can automatically swing and wind tightly to ensure the operation of the watch
the automatic mechanical watch only needs the arm to move the upper chord, but if you rece the amount of exercise, or if you don't wear your watch for a long time, the watch may be out of time or stop directly e to the lack of power. Of course, you don't have to swing your arm as a hula hoop for the sake of watch winding, just move normally
2. The wearing time is too short
if it is caused by too little exercise, don't worry, just take off your love watch and shake it horizontally for about 2 minutes before going to bed. Of course, you can also shake it for 4 minutes, because it can walk longer. If your watch can be chained, you can also wind it yourself clockwise. For your love watch to go longer, it is recommended that it should be worn on your wrist for at least 6 to 8 hours a day
3. Hairspring fault
If neither of the above two reasons is true, it may be the reason of hairspring fault. If you exercise too much, the wind will be tight. If the wind up really leads to the lack of power, it is usually between 9:00 and 12:00 p.m. when the calendar menu is on, his needle wheel starts to drive the calendar wheel. When the load is heavy, the watch is tired. At this time, if the power is not enough and no one pushes it, it is easy to stop. Don't dial the needle in reverse phase ring this period. Many calendar discs of mechanical watches are plastic parts. If they are not careful, the gears will be broken. If they are broken, they will be stuck at this time every day, or they won't jump to a fixed date. That's why the mechanical watch stopped
4. Knock fault
the parts of the watch are very precise and small. If you knock them carelessly, or if you knock them on yourself. This is easy to cause the movement parts to fall off or directly break down
all automatic mechanical wristwatches must be worn frequently or chained regularly to maintain normal operation. If the parts stop running for a long time, it will lead to the deterioration of the watch function. Generally speaking, the power storage of a three pin watch is no more than 38 hours. That is to say, if you don't wear the watch for more than 39 hours, the watch will eventually stop e to the exhaustion of its spring. If you only have one or two automatic wristwatches in your collection, you won't feel any trouble if you often wear them for the sake of chaining or when you stop. But if you have a large number of mechanical watches, make sure that all the watches are not stopped, everyone will feel headache and trouble
if there is a problem with the watch, please send it to the maintenance point in time,