Experience of going to the disinfection and supply center in the
Publish: 2021-04-23 04:00:18
1. July 31, 2015
I'm going to transfer to the physical examination center tomorrow. I'm a little afraid, and I have to adapt to the interpersonal relationship there again. The head nurse said: I was asked to report by myself. Among the six of us, I was the first one to transfer to this department, and also the first one among us
thank you very much for your patience in teaching me, and I have learned a lot
the following is what I have mastered in the supply room:
I. the process of collection
1. Personal protection (masks, hats, film gloves, rubber gloves)
2. Preparation for use (car collection, registration book, close closure, plastic basket)
3. Department collection
4, Check (check whether the instrument is damaged) clean and non clean classification, fill in the receiving record
5. Receiving signature confirmation
6. Cleaning and disinfection of the car (wiping with available chlorine 500mg / L)
2. Cleaning process
1, bowl Cleaning of bending plate
personal protection - soaking in effective chlorine disinfectant (500mg / L) for 30 minutes - washing - alkaline detergent - repeated brushing with flowing water - hot water washing - distilled water washing - drying
2 Cleaning of metal instruments
personal protection ~ washing with flowing water ~ soaking with multi enzyme detergent (2-3 minutes) ~ ultrasonic cleaning (5-10 minutes) repeated brushing with flowing water ~ washing with hot water ~ washing with distilled water ~ washing with water-soluble lubricant (30 seconds) ~ drying
3 Cleaning of lumen instruments http://shixi.yjbys.com/
personal protection - washing with high-pressure water gun at least 3 times after washing with flowing water - Super washing - soaking with multi enzyme detergent (2-5 minutes) - repeated brushing with flowing water - washing with high-pressure water gun at least 3 times after washing with flowing water - washing with distilled water - soaking with water-soluble lubricant for 2 minutes - drying (opening downward, vertical)
III Packaging process
preparatory work 1. Cleaning of packaging table (wiping with wet cloth) 2. Hand washing 3. Inner and outer cloth, chemical indicator card, label and surgical instrument list in accessories and dressing package
preparatory work ~ checking cleaning quality ~ checking function, maintenance ~ checking combination ~ packing ~ indicating validity period, name Check the loading requirements of the packaging and sterilizer's articles: 1. Use the sterilization rack or basket to load the articles. There is a gap (2.5cm) between the sterilization packages, which is concive to the penetration of the sterile medium
2. Articles of the same material should be placed in the same batch for sterilization
3. Articles of different materials should be placed in the upper layer, textile articles and metal instruments articles in the lower layer
4. The lower exhaust pressure steam sterilizer was used for disinfection. The large bag was placed on the upper layer and the small bag was placed on the lower layer
5. Surgical instrument set and hard container box should be placed horizontally. Pots, plates and bowls should be placed obliquely. Glass bottles and other instruments without holes should be placed upside down or on the side. Paper bags and paper plastic packaging should be placed on the side, which is concive to steam entering and cold air discharging
6. The loading capacity of the lower exhaust gas shall not exceed 80% of the cabinet room, the pre vacuum and pulsating vacuum loading capacity shall not exceed 90% of the cabinet room, and the loading capacity shall not exceed 10% and 5% of the cabinet room
weight requirements of sterilization package: dressing package should not exceed 5kg, and surgical instrument package should not exceed 7kg
sterilization package volume requirements: the lower exhaust volume shall not exceed 30 × 30 × 25cm
pre vacuum and pulsating vacuum volume shall not exceed 30 × 30 × 50cm
I'm going to transfer to the physical examination center tomorrow. I'm a little afraid, and I have to adapt to the interpersonal relationship there again. The head nurse said: I was asked to report by myself. Among the six of us, I was the first one to transfer to this department, and also the first one among us
thank you very much for your patience in teaching me, and I have learned a lot
the following is what I have mastered in the supply room:
I. the process of collection
1. Personal protection (masks, hats, film gloves, rubber gloves)
2. Preparation for use (car collection, registration book, close closure, plastic basket)
3. Department collection
4, Check (check whether the instrument is damaged) clean and non clean classification, fill in the receiving record
5. Receiving signature confirmation
6. Cleaning and disinfection of the car (wiping with available chlorine 500mg / L)
2. Cleaning process
1, bowl Cleaning of bending plate
personal protection - soaking in effective chlorine disinfectant (500mg / L) for 30 minutes - washing - alkaline detergent - repeated brushing with flowing water - hot water washing - distilled water washing - drying
2 Cleaning of metal instruments
personal protection ~ washing with flowing water ~ soaking with multi enzyme detergent (2-3 minutes) ~ ultrasonic cleaning (5-10 minutes) repeated brushing with flowing water ~ washing with hot water ~ washing with distilled water ~ washing with water-soluble lubricant (30 seconds) ~ drying
3 Cleaning of lumen instruments http://shixi.yjbys.com/
personal protection - washing with high-pressure water gun at least 3 times after washing with flowing water - Super washing - soaking with multi enzyme detergent (2-5 minutes) - repeated brushing with flowing water - washing with high-pressure water gun at least 3 times after washing with flowing water - washing with distilled water - soaking with water-soluble lubricant for 2 minutes - drying (opening downward, vertical)
III Packaging process
preparatory work 1. Cleaning of packaging table (wiping with wet cloth) 2. Hand washing 3. Inner and outer cloth, chemical indicator card, label and surgical instrument list in accessories and dressing package
preparatory work ~ checking cleaning quality ~ checking function, maintenance ~ checking combination ~ packing ~ indicating validity period, name Check the loading requirements of the packaging and sterilizer's articles: 1. Use the sterilization rack or basket to load the articles. There is a gap (2.5cm) between the sterilization packages, which is concive to the penetration of the sterile medium
2. Articles of the same material should be placed in the same batch for sterilization
3. Articles of different materials should be placed in the upper layer, textile articles and metal instruments articles in the lower layer
4. The lower exhaust pressure steam sterilizer was used for disinfection. The large bag was placed on the upper layer and the small bag was placed on the lower layer
5. Surgical instrument set and hard container box should be placed horizontally. Pots, plates and bowls should be placed obliquely. Glass bottles and other instruments without holes should be placed upside down or on the side. Paper bags and paper plastic packaging should be placed on the side, which is concive to steam entering and cold air discharging
6. The loading capacity of the lower exhaust gas shall not exceed 80% of the cabinet room, the pre vacuum and pulsating vacuum loading capacity shall not exceed 90% of the cabinet room, and the loading capacity shall not exceed 10% and 5% of the cabinet room
weight requirements of sterilization package: dressing package should not exceed 5kg, and surgical instrument package should not exceed 7kg
sterilization package volume requirements: the lower exhaust volume shall not exceed 30 × 30 × 25cm
pre vacuum and pulsating vacuum volume shall not exceed 30 × 30 × 50cm
2. I'll give you an outline for your reference, and you can delete it as needed
self identification
first, overview of work, completion of work objectives and achievements (write in detail)
Second, compliance with ideology and work discipline
Third, existing problems and direction of efforts (write less)
I will be strict with myself and constantly improve my work ability in the future
self identification
first, overview of work, completion of work objectives and achievements (write in detail)
Second, compliance with ideology and work discipline
Third, existing problems and direction of efforts (write less)
I will be strict with myself and constantly improve my work ability in the future
3. Unknown_Error
4. Supply room internship summary provides you with the work report of nurse interns participating in the internship work in the supply room, sorting out the personal work harvest and the understanding and experience of the post ring the internship. The following is a summary of the supply room internship
supply room internship summary
supply room is my first internship department in your hospital. Although there is no busy ward and I don't deal with patients, it is the disinfection and sterilization center of the whole hospital. At the beginning, I thought that the supply room could not learn injection, dispensing, sputum suction and other operations. What I learned was aseptic operation, how to sterilize and understand the principle of mechanical disinfection and sterilization. After three weeks of internship, what could I learn? Would I feel idle< 1. Personal protection (masks, hats, film gloves, rubber gloves)
2. Preparation for use (car receiving, registration book, closed, plastic basket)
3. Department receiving
4. Receiving items, counting (checking whether the equipment is damaged), cleaning and non cleaning classification, and filling in receiving records
5. Receiving signature confirmation
6. Cleaning and disinfection of the car (wiping with available chlorine 500mg / L)
2. Cleaning process
1. Cleaning of bowls and bending plates
personal protection - soaking in available chlorine disinfectant (500mg / L) for 30 minutes - washing - alkaline detergent - repeated brushing with flowing water - hot water washing - distilled water washing - drying
2 Metal equipment cleaning
personal protection ~ washing with flowing water ~ soaking with multi enzyme detergent (2-3 minutes) ~ ultrasonic cleaning (5-10 minutes) repeated brushing with flowing water ~ hot water washing ~ distilled water washing ~ water soluble lubricant (30 seconds) ~ drying
3 Cleaning of lumen instruments http://shixi.yjbys.com/
personal protection - washing with high-pressure water gun at least 3 times after washing with flowing water - Super washing - soaking with multi enzyme detergent (2-5 minutes) - repeated brushing with flowing water - washing with high-pressure water gun at least 3 times after washing with flowing water - washing with distilled water - soaking with water-soluble lubricant for 2 minutes - drying (opening downward, vertical)
III Packaging process
preparation work 1. Cleaning of packaging table (wiping with wet cloth) 2. Hand washing 3. Chemical indicator cards, labels and surgical instruments in inner and outer cloth, accessories and dressing bags
preparation work ~ checking cleaning quality ~ checking function, maintenance ~ checking combination ~ packing ~ indicating validity period, naming and checking the loading requirements of packaging and sterilizer's articles: 1 There is a gap (2.5cm) between the sterilization package and the package, which is concive to the penetration of sterile medium
2. Articles of the same material should be placed in the same batch for sterilization
3. Articles of different materials should be placed in the upper layer of textile procts and in the lower layer of metal instruments
4. The lower exhaust pressure steam sterilizer was used for disinfection. The large bag was placed on the upper layer and the small bag was placed on the lower layer
5. Surgical instruments and hard containers should be placed horizontally. Pots, plates and bowls should be placed obliquely. Glass bottles and other instruments without holes should be placed upside down or on the side. Paper bags and paper plastic packaging should be placed on the side, which is concive to steam entering and cold air discharging
6. The loading capacity of the lower exhaust gas shall not exceed 80% of the cabinet room, the pre vacuum and pulsating vacuum loading capacity shall not exceed 90% of the cabinet room, and the loading capacity shall not exceed 10% and 5% of the cabinet room
weight requirements of sterilization package: dressing package should not exceed 5kg, and surgical instrument package should not exceed 7kg
sterilization package volume requirements: the lower exhaust volume shall not exceed 30 × 30 × 25cm
the pre vacuum and pulse vacuum volume shall not exceed 30 × 30 × 50cm
the end of the internship in the supply room. Later, when I went to clinical practice, I thought that whenever I saw aseptic bags and pieces of medical equipment; In my mind, I should subconsciously understand what kind of bags, what kind of equipment and what kind of use they are. Then it is natural to think that they are distributed to each department after the process of recycling, classification, cleaning and disinfection, drying and lubricating oil, packaging and sterilization, and storage in the supply room. This process may sound very small and simple, but every detail of it is very subtle and important. And these are also my harvest in the supply room! Finally, in the supply room of this week, I feel very happy, the important thing is to benefit a lot
now I have just set foot in this instry, and I still have a long way to go. I think I'll get better! To provide high-quality, efficient, low-cost services for clinical, service initiative, enthusiasm, timely, thoughtful, this is the value of supply room work!
supply room internship summary
supply room is my first internship department in your hospital. Although there is no busy ward and I don't deal with patients, it is the disinfection and sterilization center of the whole hospital. At the beginning, I thought that the supply room could not learn injection, dispensing, sputum suction and other operations. What I learned was aseptic operation, how to sterilize and understand the principle of mechanical disinfection and sterilization. After three weeks of internship, what could I learn? Would I feel idle< 1. Personal protection (masks, hats, film gloves, rubber gloves)
2. Preparation for use (car receiving, registration book, closed, plastic basket)
3. Department receiving
4. Receiving items, counting (checking whether the equipment is damaged), cleaning and non cleaning classification, and filling in receiving records
5. Receiving signature confirmation
6. Cleaning and disinfection of the car (wiping with available chlorine 500mg / L)
2. Cleaning process
1. Cleaning of bowls and bending plates
personal protection - soaking in available chlorine disinfectant (500mg / L) for 30 minutes - washing - alkaline detergent - repeated brushing with flowing water - hot water washing - distilled water washing - drying
2 Metal equipment cleaning
personal protection ~ washing with flowing water ~ soaking with multi enzyme detergent (2-3 minutes) ~ ultrasonic cleaning (5-10 minutes) repeated brushing with flowing water ~ hot water washing ~ distilled water washing ~ water soluble lubricant (30 seconds) ~ drying
3 Cleaning of lumen instruments http://shixi.yjbys.com/
personal protection - washing with high-pressure water gun at least 3 times after washing with flowing water - Super washing - soaking with multi enzyme detergent (2-5 minutes) - repeated brushing with flowing water - washing with high-pressure water gun at least 3 times after washing with flowing water - washing with distilled water - soaking with water-soluble lubricant for 2 minutes - drying (opening downward, vertical)
III Packaging process
preparation work 1. Cleaning of packaging table (wiping with wet cloth) 2. Hand washing 3. Chemical indicator cards, labels and surgical instruments in inner and outer cloth, accessories and dressing bags
preparation work ~ checking cleaning quality ~ checking function, maintenance ~ checking combination ~ packing ~ indicating validity period, naming and checking the loading requirements of packaging and sterilizer's articles: 1 There is a gap (2.5cm) between the sterilization package and the package, which is concive to the penetration of sterile medium
2. Articles of the same material should be placed in the same batch for sterilization
3. Articles of different materials should be placed in the upper layer of textile procts and in the lower layer of metal instruments
4. The lower exhaust pressure steam sterilizer was used for disinfection. The large bag was placed on the upper layer and the small bag was placed on the lower layer
5. Surgical instruments and hard containers should be placed horizontally. Pots, plates and bowls should be placed obliquely. Glass bottles and other instruments without holes should be placed upside down or on the side. Paper bags and paper plastic packaging should be placed on the side, which is concive to steam entering and cold air discharging
6. The loading capacity of the lower exhaust gas shall not exceed 80% of the cabinet room, the pre vacuum and pulsating vacuum loading capacity shall not exceed 90% of the cabinet room, and the loading capacity shall not exceed 10% and 5% of the cabinet room
weight requirements of sterilization package: dressing package should not exceed 5kg, and surgical instrument package should not exceed 7kg
sterilization package volume requirements: the lower exhaust volume shall not exceed 30 × 30 × 25cm
the pre vacuum and pulse vacuum volume shall not exceed 30 × 30 × 50cm
the end of the internship in the supply room. Later, when I went to clinical practice, I thought that whenever I saw aseptic bags and pieces of medical equipment; In my mind, I should subconsciously understand what kind of bags, what kind of equipment and what kind of use they are. Then it is natural to think that they are distributed to each department after the process of recycling, classification, cleaning and disinfection, drying and lubricating oil, packaging and sterilization, and storage in the supply room. This process may sound very small and simple, but every detail of it is very subtle and important. And these are also my harvest in the supply room! Finally, in the supply room of this week, I feel very happy, the important thing is to benefit a lot
now I have just set foot in this instry, and I still have a long way to go. I think I'll get better! To provide high-quality, efficient, low-cost services for clinical, service initiative, enthusiasm, timely, thoughtful, this is the value of supply room work!
Hot content