Beijing Rolex maintenance center to 1102, block D, Huaxi Interna
Publish: 2021-04-23 23:55:43
1. Our address is: room 1102, 11th floor, block D, Huaxi International Center, Chaoyang International Trade, Beijing.
suggestions for the use of mechanical watch:
1. Watch with manual winding movement should be wound at the same time every day as far as possible, so that the watch can operate with enough energy in the next 24 hours
2. The energy of the watch with automatic winding movement comes from the movement of the wearer's arm, so it is not necessary to manually wind the watch under normal wearing conditions. Only when the wearer's movement is not enough to add enough energy to the spring, the watch can be manually wound up, and the crown rotation is controlled within 20 turns
3. For an automatic winding watch that has not been worn for more than 40 hours, turn the crown for 20 turns to start the drive system of the movement again
4. In order to prevent moisture from seeping into the watch case and keep the watch waterproof, please make sure that the crown is locked at all times.
suggestions for the use of mechanical watch:
1. Watch with manual winding movement should be wound at the same time every day as far as possible, so that the watch can operate with enough energy in the next 24 hours
2. The energy of the watch with automatic winding movement comes from the movement of the wearer's arm, so it is not necessary to manually wind the watch under normal wearing conditions. Only when the wearer's movement is not enough to add enough energy to the spring, the watch can be manually wound up, and the crown rotation is controlled within 20 turns
3. For an automatic winding watch that has not been worn for more than 40 hours, turn the crown for 20 turns to start the drive system of the movement again
4. In order to prevent moisture from seeping into the watch case and keep the watch waterproof, please make sure that the crown is locked at all times.
2. Watch repair address: No. 1, East Chang'an Avenue, Dongcheng District, Beijing Beijing East Plaza Xintiandi shopping mall first floor SS02B
advisory telephone: 010-53368270
1, lack of power storage: you need to check whether the adequacy of power, automatic chain mechanical watches, if a small amount of exercise may also cause insufficient power storage, you can add power by manual chain. Then observe whether the phenomenon of speed continues
2. Lack of power: if the quartz watch suddenly finds that it is slow, it may be caused by the lack of battery energy, you can send the watch to the special maintenance point to check the power
3. The watch has been hit or hit: the watch is very tight. If it is hit or hit, the internal parts may become loose and the damage may also cause travel time problems
4. Maintenance required: the lack of oil in the movement or the wear and aging of internal parts may cause travel time problems, which need to be maintained and sent to the designated repair shop for maintenance
5. In addition to the above common cases, the watch is magnetized e to the influence of some ambient temperature: if the hairspring of the watch is magnetized, the watch's travel time will be inaccurate. The influence of the wearer's use habits may cause the increase of travel time error. But you do not need to worry, please send the watch to the designated repair shop, ask professionals to check and adjust, the watch can be restored to the normal error range.
advisory telephone: 010-53368270
1, lack of power storage: you need to check whether the adequacy of power, automatic chain mechanical watches, if a small amount of exercise may also cause insufficient power storage, you can add power by manual chain. Then observe whether the phenomenon of speed continues
2. Lack of power: if the quartz watch suddenly finds that it is slow, it may be caused by the lack of battery energy, you can send the watch to the special maintenance point to check the power
3. The watch has been hit or hit: the watch is very tight. If it is hit or hit, the internal parts may become loose and the damage may also cause travel time problems
4. Maintenance required: the lack of oil in the movement or the wear and aging of internal parts may cause travel time problems, which need to be maintained and sent to the designated repair shop for maintenance
5. In addition to the above common cases, the watch is magnetized e to the influence of some ambient temperature: if the hairspring of the watch is magnetized, the watch's travel time will be inaccurate. The influence of the wearer's use habits may cause the increase of travel time error. But you do not need to worry, please send the watch to the designated repair shop, ask professionals to check and adjust, the watch can be restored to the normal error range.
3. Our address is: room 1102, 11th floor, block D, Huaxi International Center, Chaoyang International Trade, Beijing.
suggestions for the use of mechanical watch:
1. Watch with manual winding movement should be wound at the same time every day as far as possible, so that the watch can operate with enough energy in the next 24 hours
2. The energy of the watch with automatic winding movement comes from the movement of the wearer's arm, so it is not necessary to manually wind the watch under normal wearing conditions. Only when the wearer's movement is not enough to add enough energy to the spring, the watch can be manually wound up, and the crown rotation is controlled within 20 turns
3. For an automatic winding watch that has not been worn for more than 40 hours, turn the crown for 20 turns to start the drive system of the movement again
4. In order to prevent moisture from seeping into the watch case and keep the watch waterproof, please make sure that the crown is locked at all times.
suggestions for the use of mechanical watch:
1. Watch with manual winding movement should be wound at the same time every day as far as possible, so that the watch can operate with enough energy in the next 24 hours
2. The energy of the watch with automatic winding movement comes from the movement of the wearer's arm, so it is not necessary to manually wind the watch under normal wearing conditions. Only when the wearer's movement is not enough to add enough energy to the spring, the watch can be manually wound up, and the crown rotation is controlled within 20 turns
3. For an automatic winding watch that has not been worn for more than 40 hours, turn the crown for 20 turns to start the drive system of the movement again
4. In order to prevent moisture from seeping into the watch case and keep the watch waterproof, please make sure that the crown is locked at all times.
4. Rolex watch's after-sales center is located in room 1003, 10 / F, Hongyi International Plaza, 299 Nanjing East Road, Huangpu District, Shanghai. When your watch breaks down, you should go to the regular after-sales center, where professional technicians carry out a comprehensive maintenance and inspection of the watch. All accessories in the after-sales Center are original ones, so as to extend the service life of the watch to the greatest extent!
5. How to solve the magnetic phenomenon of Rolex mechanical watch, once the Rolex watch magnetic will suddenly go very fast, even fast 1-2 hours / day. Usually wear Rolex mechanical wrist watch should pay attention to keep away from the magnetic field, such as audio, TV, mobile phones and other electrical appliances. Magnetization is a common phenomenon nowadays. The solution is not difficult. Just go to the Rolex maintenance department or return to the Rolex watch department for demagnetization, or provide your own degausser. It only takes half a second for the watch to demagnetize, which has no effect on the performance of Rolex watch
how to wind the Rolex mechanical watch? If the Rolex mechanical automatic winding watch is not worn for a period of time, its power storage will be exhausted and the Rolex watch will stop. To restart the Rolex watch, you need to wind it manually, loosen the crown if necessary, and rotate the crown 30-40 times. In this way, there will be enough power storage to restore normal function. Rolex non automatic mechanical watch must be wound up every day. Every time you feel the resistance of Rolex watch crown, your Rolex love watch will be wound up. Be careful not to twist the crown of Rolex hand winding watch to avoid damaging the mechanism
Why do you need to remove, wash and refuel regularly? During the use of Rolex watch, the lubricating oil dripped on the machine parts will graally evaporate and dry over a long period of time; The friction between gears will proce some metal particles, which will increase the resistance of rotation; Dust, fiber, etc. constantly from the case gap at the invasion, is the machine fouling. Therefore, rolex watches need to be disassembled, cleaned and refueled after a period of use
it can not be generalized how often Rolex watches are oiled, which is directly related to the sealing degree of the case. The case of waterproof Rolex watch is well sealed, the st is not easy to invade the movement, and the time between cleaning and refueling can be longer; The sealing degree of the watch case without waterproof structure is generally poor, st and dirt are easy to invade the movement from the gap of the watch, and the time for cleaning and refueling is shorter. Some people say that Rolex watches should be fixed once a year or two, and it is unscientific to say that they should be disassembled, cleaned and refueled. When Rolex watches are used, they need to be disassembled, cleaned and refueled only when they find that they are walking more and more slowly or their walking time is less and less after winding.
how to wind the Rolex mechanical watch? If the Rolex mechanical automatic winding watch is not worn for a period of time, its power storage will be exhausted and the Rolex watch will stop. To restart the Rolex watch, you need to wind it manually, loosen the crown if necessary, and rotate the crown 30-40 times. In this way, there will be enough power storage to restore normal function. Rolex non automatic mechanical watch must be wound up every day. Every time you feel the resistance of Rolex watch crown, your Rolex love watch will be wound up. Be careful not to twist the crown of Rolex hand winding watch to avoid damaging the mechanism
Why do you need to remove, wash and refuel regularly? During the use of Rolex watch, the lubricating oil dripped on the machine parts will graally evaporate and dry over a long period of time; The friction between gears will proce some metal particles, which will increase the resistance of rotation; Dust, fiber, etc. constantly from the case gap at the invasion, is the machine fouling. Therefore, rolex watches need to be disassembled, cleaned and refueled after a period of use
it can not be generalized how often Rolex watches are oiled, which is directly related to the sealing degree of the case. The case of waterproof Rolex watch is well sealed, the st is not easy to invade the movement, and the time between cleaning and refueling can be longer; The sealing degree of the watch case without waterproof structure is generally poor, st and dirt are easy to invade the movement from the gap of the watch, and the time for cleaning and refueling is shorter. Some people say that Rolex watches should be fixed once a year or two, and it is unscientific to say that they should be disassembled, cleaned and refueled. When Rolex watches are used, they need to be disassembled, cleaned and refueled only when they find that they are walking more and more slowly or their walking time is less and less after winding.
6. Hello, yes, the address is
Room 1102, block D, world trade (Huaxi International Center), no.6, Jianguomenwai street, Chaoyang District, Beijing
precautions for Rolex maintenance
at the top of the list, the sweat on the watch will corrode the case when wearing the watch. All steel case is made of nickel chromium alloy, which has better corrosion resistance. The half steel case is copper. If you touch it with sweat for a long time, it is easy to be corroded. Wipe sweat with a soft cloth or wear a plastic watch to avoid being corroded by sweat
secondly, watches that are not stored for a long time should be timed once a month. An active watch should swing back and forth for a few minutes or be worn on the wrist for a period of time to actively tighten the spring. Prevent the parts from stopping for a long time to ensure the watch's working function
thirdly, ordinary mechanical watches are all wet. You can press the watch with dry cotton cloth, and then bake it with a 40 Watt light bulb for 5 minutes. The moisture in the watch can be fully evaporated
fourthly, when removing the watch's outer packaging, be sure to keep the box used to protect the watch. These boxes for watch maintenance can be used to keep the watch safely when the watch is not worn, so as to prevent the watch from damage or collision. Therefore, it is necessary to keep the mobile phone. It is recommended to develop the watch on weekdays when the watch is not worn. Putting habits in a box can greatly rece the possibility of damaging a watch.
Room 1102, block D, world trade (Huaxi International Center), no.6, Jianguomenwai street, Chaoyang District, Beijing
precautions for Rolex maintenance
at the top of the list, the sweat on the watch will corrode the case when wearing the watch. All steel case is made of nickel chromium alloy, which has better corrosion resistance. The half steel case is copper. If you touch it with sweat for a long time, it is easy to be corroded. Wipe sweat with a soft cloth or wear a plastic watch to avoid being corroded by sweat
secondly, watches that are not stored for a long time should be timed once a month. An active watch should swing back and forth for a few minutes or be worn on the wrist for a period of time to actively tighten the spring. Prevent the parts from stopping for a long time to ensure the watch's working function
thirdly, ordinary mechanical watches are all wet. You can press the watch with dry cotton cloth, and then bake it with a 40 Watt light bulb for 5 minutes. The moisture in the watch can be fully evaporated
fourthly, when removing the watch's outer packaging, be sure to keep the box used to protect the watch. These boxes for watch maintenance can be used to keep the watch safely when the watch is not worn, so as to prevent the watch from damage or collision. Therefore, it is necessary to keep the mobile phone. It is recommended to develop the watch on weekdays when the watch is not worn. Putting habits in a box can greatly rece the possibility of damaging a watch.
7. 1. The anti perspiration of the watch strap is corrosive when the perspiration is in long-term contact with the Case strap. If the leather strap is not cleaned in time, there will be odor
2. The back cover of the watch can't be opened at will to avoid the entry of st, which will affect the normal operation of the watch movement
3. Do not put the watch in the appliance with camphor smell, camphor smell will cause the surface oil to deteriorate
4. Do not put the watch near the magnetic object to avoid magnetization
5. A watch that has been stored for a long time should be wound at a fixed time to ensure the normal operation of the watch
5. If the watch is damp, press the cotton on the watch and bake it with 40 Watt electric bulb for 5 minutes to evaporate all the moisture in the watch
6. Don't discard the watch's packing box. Put it in the box when the watch is not worn, so as to rece the risk of damage
7. Don't sleep with luminous ceramic watch. Luminous materials are harmful to human body.
2. The back cover of the watch can't be opened at will to avoid the entry of st, which will affect the normal operation of the watch movement
3. Do not put the watch in the appliance with camphor smell, camphor smell will cause the surface oil to deteriorate
4. Do not put the watch near the magnetic object to avoid magnetization
5. A watch that has been stored for a long time should be wound at a fixed time to ensure the normal operation of the watch
5. If the watch is damp, press the cotton on the watch and bake it with 40 Watt electric bulb for 5 minutes to evaporate all the moisture in the watch
6. Don't discard the watch's packing box. Put it in the box when the watch is not worn, so as to rece the risk of damage
7. Don't sleep with luminous ceramic watch. Luminous materials are harmful to human body.
8. Hello, there is a professional after-sales service center in Beijing, the address is
Room 1102, block D, world trade (Huaxi International Center), no.6, Jianguomenwai street, Chaoyang District, Beijing
if it's just a simple cleaning, you can
1. Cleaning tools include toothbrush and toothpaste, which are enough to clean the watch
2. Clean the gaps of the watch with a dry toothbrush, which will hide dirt
3. put toothpaste on the toothbrush, gently wipe the watch strap, brush it clean, wipe it with toothpaste foam, and clean it up. To clean the dial of a watch, usually there is only a little dirt in the gap of the dial. Brush lightly with a dry brush.
Room 1102, block D, world trade (Huaxi International Center), no.6, Jianguomenwai street, Chaoyang District, Beijing
if it's just a simple cleaning, you can
1. Cleaning tools include toothbrush and toothpaste, which are enough to clean the watch
2. Clean the gaps of the watch with a dry toothbrush, which will hide dirt
3. put toothpaste on the toothbrush, gently wipe the watch strap, brush it clean, wipe it with toothpaste foam, and clean it up. To clean the dial of a watch, usually there is only a little dirt in the gap of the dial. Brush lightly with a dry brush.
9. Yes, just bring the watch. Our store is located in room 1102, 11th floor, block D, Huaxi International Center, Chaoyang International Trade, Beijing. Suggestions for using mechanical watch:
1. For watches with manual winding movement, the winding should be done at the same time every day, so that the watch can operate with enough energy in the next 24 hours
2. The energy of the watch with automatic winding movement comes from the movement of the wearer's arm, so it is not necessary to manually wind the watch under normal wearing conditions. Only when the wearer's movement is not enough to add enough energy to the spring, the watch can be manually wound up, and the crown rotation is controlled within 20 turns
3. For an automatic winding watch that has not been worn for more than 40 hours, turn the crown for 20 turns to start the drive system of the movement again
4. In order to prevent moisture from seeping into the watch case and keep the watch waterproof, please ensure that the crown is locked at all times
1. For watches with manual winding movement, the winding should be done at the same time every day, so that the watch can operate with enough energy in the next 24 hours
2. The energy of the watch with automatic winding movement comes from the movement of the wearer's arm, so it is not necessary to manually wind the watch under normal wearing conditions. Only when the wearer's movement is not enough to add enough energy to the spring, the watch can be manually wound up, and the crown rotation is controlled within 20 turns
3. For an automatic winding watch that has not been worn for more than 40 hours, turn the crown for 20 turns to start the drive system of the movement again
4. In order to prevent moisture from seeping into the watch case and keep the watch waterproof, please ensure that the crown is locked at all times
Hot content