Liangxiang university town goes to Fortune Center by subway

1. Hello, does the machine need to run 24 hours? It depends on your personal needs! And running all the time will definitely affect the life of the machine, because if the machine continues to run, first of all, the calorific value of the machine will continue to increase and the temperature can not be lowered, resulting in the accelerated wear of the machine parts, thus recing the life of the machine!

2. Memory virus<
Introction to shadow system:
Powershadow builds the virtual image of the existing operating system, namely shadow mode, which is exactly the same as the real system. Users can choose to enable or exit the virtual image at any time. After the user enters shadow mode, all operations are virtual and will not affect the real system. All changes will disappear after leaving shadow mode. Therefore, all viruses, Trojans, rogue software can not infringe on the real operating system, all their operations are just a fake
at the same time, please note that this version does not support the following features:
does not support 64 bit operating system
raid architecture is not supported
Windows 98 / me and Vista are not supported< At present, Powershadow is distributed to Chinese users free of charge. Registration information:
User Name: Powershadow serial number: vvr29e-r4wck2-k4t111-v1yhtp-4jyjdd

3. There are basically three routes from Hangzhou downtown to Fuyang Changkou examination center.
take the long-distance bus from Hangzhou to Fuyang Xindeng at its 19bao passenger terminal, which runs half an hour from 7:00 every day, and get off when passing by Fuyang West passenger station; Then take a minibus from Fuyang west railway station to Datian and walk 100 meters when passing by the entrance examination hall of Fuyang
secondly, take bus 514 at putisi Road near Longxiang bridge and get off at Fuyang bus station, then take bus in Fuyang City, or take a taxi to Fuyang West Railway Station, and then take a minibus in Datian at West Railway Station. When passing by Changkou new examination hall, get off and walk 100 meters to Fuyang new railway station.
thirdly, take a bus at Hangzhou south bus station, angel market or city station, Then take Fuyang City bus or take a taxi to Fuyang West Railway Station, and then take the China bus to Datian at the west railway station. When passing the entrance examination hall, get off and walk for 100 meters.

4.

bus line: Fuyang No.9 → 514 → Metro Line 1, the whole journey is about 43.8 km

1. Walk about 570 meters from Fuyang City to Enbo Square Station

2. Take Fuyang No.9, pass 7 stops, and reach orthopedic hospital station

3. Walk about 10 meters to tongbangchang station

4. Take 514, pass 23 stops, and reach Yan'an South Road Station (or take 902)

5 Walk about 440 meters to Ding'an Road station, take subway line 1, pass 4 stops to Xihu Culture Square Station, walk about 320 meters to Hangzhou motor vehicle drivers

5. Computer repeatedly restart, first of all, the most harmful is the hard disk
the frequent start and stop of hard disk may cause permanent bad channel
secondly, the CPU will be damaged, and the life of transistors in the current pulse CPU will be reced
once again, it is the power supply. If the quality of the power supply is a little poor, it will have internal problems and strike a few times.

6. Computer restart is just a initialization (detection) of the hardware, and run the necessary files, it is no different from the normal use of the computer damage, if the frequent power on and off will have an impact on the hardware, as if there will be a large current pulse impact hardware problems.

7. When the computer is too slow, just restart it, why
because you have opened many programs, they all consume a lot of computer resources. If your computer is usually configured, sometimes when you run relatively large programs, because your software requirements are greater than the hardware resources of the computer, it will cause slow speed. At this time, you can choose & quot; Windows optimization master & quot; The internal memory arrangement can ease the slow. Restart means that the system starts running again without loading so many software, so you don't feel so slow. Here are some suggestions: try to put as few things as possible on the C disk of the computer, and at least 2G space should be reserved. Regularly organize the system, and don't put too many icons on the desktop. In this way, the system startup will increase the use of memory, and the computer should be regularly antivirus and regularly backed up, If you have any questions, you can leave a message at my post bar to learn from each other and help each other

8.

There's time

bus route: No.318 interval → Hangfu business line → Fuyang No.9, the whole journey is about 42.5km

1. Walk about 460m from Hangzhou to Wulinmen station

2. Take No.318 interval, pass 16 stops, and then reach Jiuxi station (or take No.318)

3. Take Hangfu business line, pass 14 stops, and then reach Yonghe mansion station (or take line 514a, line 318) 514b line)

4. Walk about 190 meters to bone disease hospital station

5. Take Fuyang No.9 bus, pass 8 stops to Enbo Square Station

6. Walk about 550 meters to Fuyang City

9. Computer often restart automatically. 1. Software 1. Virus damage since the computer soon, computer virus also came into being. When the network becomes the information artery of today's society, the spread of the virus is more convenient, so it also interferes and destroys our normal work from time to time. A typical example is the "shockwave" virus, which has caused serious damage to computers around the world some time ago. When it breaks out, it will prompt that the system will start automatically after 60 seconds. In fact, as early as the DOS era, there are many viruses that can automatically restart your computer. For whether it belongs to virus destruction, we can use the latest version of anti-virus software for anti-virus, generally will find the existence of virus. Of course, there is also a possibility that when you surf the Internet, someone has maliciously intruded into your computer and placed a Trojan horse program. In this way, the other party can remotely control all the activities of your computer, including the restart of your computer. For some Trojans, it is not easy to clear, it is best to re install the operating system. 2. The system file is damaged. When the system file is damaged, such as kernel32.dll under Win2K, fonts under win98fonts directory, etc., the basic files of the system run time are damaged, and the system will be forced to restart because it is unable to complete initialization. You can do an experiment, the Win98 directory font renamed try. When you turn it on again, our computer will start again and again. For this kind of failure, because you cannot access the normal desktop, you can only override the installation or re install. 3. The timing software or the scheling software works. If you set up to restart or load some work programs in the "scheling taskbar", the computer will start again when the timing time comes. In this case, we can open the "start" item to check if there are any unfamiliar executive files or other timing programs in it, and then turn it on again after shielding it. Of course, we can also directly enter the "msconfig" command in "run" to select the startup item. 2、 The working voltage range of switching power supply for household computer is 170V-240V. When the voltage is lower than 170V, the computer will automatically restart or shut down. Because we sometimes can't feel the fluctuation of the mains voltage, we will mistakenly think that the computer will restart automatically for no reason. Solution: for areas with unstable power supply, we can purchase UPS power supply or 130-260v wide switching power supply to ensure the stable operation of the computer. 2. The quality of the plug or socket is poor, and the contact is poor. Most of the power plug on the market are of poor quality, and the internal contacts are manually welded, and the acid flux is often used, which easily leads to the oxidation of the solder joint in the future use, causing open circuit or leakage between the live wire and the zero wire. Because of manual welding and poor elasticity of phosphor brass sheet, it is easy to lose its elasticity in a short time, resulting in poor contact with the power plug of the host or display, resulting in large contact resistance. When working for a long time, a large amount of heat will be generated, resulting in virtual connection. At this time, the host will restart or the display will flash black screen. Another possibility is the wall socket used in our home. Most of the wall sockets are not installed by professionals, so the internal wiring of the sockets is very nonstandard. Especially, if we often use high-power electric heaters, these sockets can easily lead to internal thermal oxidation and virtual connection, resulting in intermittent power failure, causing the computer to restart or the display to blink. Solutions: 1. Don't buy cheap and low-quality power plug-ins to save money. Buy some famous brand power plug-ins, because the internal parts are automatically installed and crimped by machines, and manual welding is not used. ② For whether it belongs to the problem of virtual connection inside the wall socket, we can try to replace the host with a wall socket to see if there is the same problem of automatic restart. 3. Insufficient power or poor performance of computer power supply is also common, especially when we add new equipment to our host, such as replacing high-end graphics card, adding recorder and hard disk. When the host is working at full speed, such as running a large-scale 3D game, recording at high speed or preparing to read the CD, when it is just started, the double hard disks the data, which may cause the power protection to stop output e to the lack of instantaneous power supply. However, when the power supply stops output, the load will be reced, and then the power supply will start again. Because the recovery time after protection is very short, our performance is that the host restarts automatically. Another case is that the performance of the host switching power supply is poor, although the voltage is stable and within the normal allowable range, but because the harmonic content in the output power supply is too large, it will also cause the host to crash or restart frequently. For this case, we use a multimeter to test its voltage is normal, it is best to replace a good power supply to replace the exclusion. Solution: high quality and high power computer power supply. 4. The mains plug of the host switching power supply is loose, in poor contact, and not tightly plugged. Most of them will appear on DIY machines. The power cord of the host power supply has not passed 3C certification, and does not match the power socket. When we shake the table or touch the host, the host will restart automatically, usually accompanied by a slight electric fire. Solution: replace high quality 3C certified power cord. 5. The power supply atx20 socket of the motherboard has false welding and poor contact. This kind of fault is not common, but it does exist. The main reason is to move the atx20 pin plug left and right to see whether the host will restart automatically when the host is working normally. At the same time, check whether the spring inside the 20 pin power plug is oxidized, which can easily lead to high contact resistance and poor contact, causing the host machine to crash or restart. Sometimes it is necessary to check whether the connecting wires at the tail of 20 pin plug are reliable. Solution: ① if the motherboard solder joint is false, it can be directly repaired with electric iron. Note: when welding motherboard, hard disk, graphics card and other computer boards, make sure the electric iron is well grounded, or pull out the power plug when welding. ② If it's a power problem, it's better to replace a good power supply. 6. CPU problem. When some function circuits inside the CPU are damaged and the secondary cache is damaged, the computer can start, and even enter the normal desktop for normal operation. However, when a special function is performed, it will restart or crash, such as drawing tables, playing VCDs, playing games, etc. Solution: try to mask L2 or L1 in CMOS to see if the host can run normally; Another way is to replace and eliminate the CPU directly. If the shielding can work normally, you can still make do with it. Although it is slower, it will save money. 7. Memory problem if a chip on the memory mole is not completely damaged, it is likely to pass the self-test (most of them are set with post), but it will restart unexpectedly e to the function failure caused by the high calorific value of the memory. Most of the time, when the memory is damaged, the boot will give an alarm, but when the memory is damaged, it will not give an alarm, and there are still some faults without power on. It is better to use the elimination method, which can quickly determine the fault location. 8. Optical drive problem if the optical drive is damaged, it will also cause the host to start slowly or fail the self-test, or it may be a sudden restart in the process of work. For the latter case, if we replace the optical drive, it is likely that the power consumption of the optical drive is different. What you need to understand is that although the ATPI interface of the optical drive is the same, the pin definitions of different manufacturers are not the same. If there is a problem with our hard disk cable, there may be a situation that there is no problem with the use of a certain brand of optical drive, but there is no problem with the use of other brands of optical drives. This needs your attention. 9. There is a problem with the quality of the reset key. If the reset switch is damaged and the internal reed is always in the short-circuit position, the host will not be able to power up for self-test. However, when the elasticity of the reset switch is weakened or the button on the chassis is not easy to pop up when it is pressed down, it will appear in the process of use, because the chassis is touched occasionally or the host suddenly restarts in normal use. Therefore, when the reset switch can't be pressed freely, we must check it carefully. It's better to replace a new reset button switch or lubricate the external buttons of the chassis. Another case is that the insulation layer of reset switch lead in the chassis is stripped too much ring welding, and the reset switch lead is too close to each other e to multiple unpacking ring use, resulting in collision and automatic restart of the host. 10. Access to the network card or parallel port, serial port, USB interface access to external devices automatically restart, this situation is generally e to peripheral failure, such as the printer's parallel port damage, a pin short circuit to the ground, USB device damage short circuit to the ground, network card work is not standard, when we use these devices, will cause the computer to restart because of a sudden power short circuit[ Source: Feiteng technology website www.ftnet.com.cn/ Other reasons: 1. Poor heat dissipation or temperature measurement failure, poor heat dissipation of CPU. The common problems are that the fixing clip of CPU radiator falls off, there are foreign matters between CPU radiator and CPU, and there is too much st on the radiator after CPU fan has been used for a long time, The accumulation temperature is too high to restart automatically. Another problem is that the temperature probe under the CPU is damaged, or the temperature measuring circuit inside the p4cpu is damaged, and the BIOS on the motherboard has a bug. Under certain special conditions, the temperature measurement is not accurate, which will cause the host to restart automatically and protectively. Finally, if the CPU protection temperature set in CMOS is too low, the host will restart automatically. 2. Fan speed measurement failure when the speed measurement circuit of the CPU fan is damaged or the speed measurement line is intermittently open, because the main board can not detect the fan speed, it will mistakenly think that the fan stops and automatically shut down or restart, but we may see that the CPU fan rotates normally and the speed measurement is also normal. 3. Strong magnetic interference don't underestimate electromagnetic interference. Many times our computer crashes and restarts are also caused by interference. These interference not only come from the interference of CPU fan, chassis fan, graphics card fan, graphics card, motherboard and hard disk inside the chassis, but also from the interference of external power line, frequency conversion air conditioner and even large equipment such as automobile. If the interference performance of our host is poor or the shielding is poor, the host will restart unexpectedly or crash frequently. Generally, it is caused by illegal operation. You can open start run enter CHKDSK or CHKDSK / F. the next time you start the computer, you need to repair the damaged file