Go to Rolex service center to check the authenticity
Publish: 2021-04-27 16:56:23
1. Rolex after sales service center is located in room 2606, block B, China Resources Building, Wanxiang City, 1366 Qianjiang Road, Jianggan District, Hangzhou city.
there are five common reasons for watch travel time error and watch travel time inaccuracy:
1) insufficient power storage: you need to check whether the power is sufficient first. If the amount of movement of the mechanical watch on the chain is very small, it may also cause insufficient power storage, You can supplement the power by manually loading the chain, and then observe whether the phenomenon of speed continues
2) insufficient power: if the quartz watch suddenly finds that it is slow, it may be caused by insufficient battery power. You can send the watch to a special maintenance point to check the power
3) have been hit or hit: the watch is very tight. If it is hit or hit, it may cause internal parts loose and damage, and it may also cause travel time problems
4) need to be maintained: the lack of oil in the movement or the wear and aging of internal parts may cause travel time problems, which need to be maintained and sent to the designated repair point for maintenance
5) in addition to the above common cases, the watch is magnetized e to the influence of some ambient temperature: if the hairspring of the watch is magnetized, the watch's travel time will be inaccurate. The influence of the wearer's use habits may cause the increase of travel time error. But you don't need to worry, please send the watch to the designated maintenance point, and ask professionals to check and adjust, which can restore the watch to the normal error range.
there are five common reasons for watch travel time error and watch travel time inaccuracy:
1) insufficient power storage: you need to check whether the power is sufficient first. If the amount of movement of the mechanical watch on the chain is very small, it may also cause insufficient power storage, You can supplement the power by manually loading the chain, and then observe whether the phenomenon of speed continues
2) insufficient power: if the quartz watch suddenly finds that it is slow, it may be caused by insufficient battery power. You can send the watch to a special maintenance point to check the power
3) have been hit or hit: the watch is very tight. If it is hit or hit, it may cause internal parts loose and damage, and it may also cause travel time problems
4) need to be maintained: the lack of oil in the movement or the wear and aging of internal parts may cause travel time problems, which need to be maintained and sent to the designated repair point for maintenance
5) in addition to the above common cases, the watch is magnetized e to the influence of some ambient temperature: if the hairspring of the watch is magnetized, the watch's travel time will be inaccurate. The influence of the wearer's use habits may cause the increase of travel time error. But you don't need to worry, please send the watch to the designated maintenance point, and ask professionals to check and adjust, which can restore the watch to the normal error range.
2. Let me teach you a move. Go to Rolex Shanghai Service Center on the 15th floor of Libao Plaza, 222 Huaihai Middle Road, Shanghai, and tell the service staff that the watch needs oil washing and maintenance. If it is genuine, they will issue a bill to collect it; If it is a fake watch, they will refuse to provide service
Rolex charges 2000 yuan per time for cleaning and maintenance.
Rolex charges 2000 yuan per time for cleaning and maintenance.
3. Hello, how can we tell the true and false Rolex watches? It can be seen from the following aspects:
1. In order to rece the cost of the surface mirror, the surface mirror is lack of antireflection layer, and the reflection is serious under the light. Although the water does not drip, as long as it is exposed to ultraviolet light for a few minutes, the reflection is extremely serious; Due to the antireflection coating, the real watch does not have too much reflection under strong light, and has purple or blue glare
2. Watch chain. If there are grinding marks on Rolex watch chain, it may be an imitation watch, but there are slight grinding details at the corner of watch chain, it may also be a high imitation watch
3. The hands of the watch pins and the fake ones usually have wear marks, which are tweezers marks left ring installation
4. Literally, rolex watches of real brands are machine printed, while imitation watches usually have handwriting marks
5. Weight: the weight of a fake Rolex watch is generally lighter, while that of a genuine Rolex watch is heavier
6. The handlebars of fake Rolex watches are the same, but the authentic ones are of their own specifications.
1. In order to rece the cost of the surface mirror, the surface mirror is lack of antireflection layer, and the reflection is serious under the light. Although the water does not drip, as long as it is exposed to ultraviolet light for a few minutes, the reflection is extremely serious; Due to the antireflection coating, the real watch does not have too much reflection under strong light, and has purple or blue glare
2. Watch chain. If there are grinding marks on Rolex watch chain, it may be an imitation watch, but there are slight grinding details at the corner of watch chain, it may also be a high imitation watch
3. The hands of the watch pins and the fake ones usually have wear marks, which are tweezers marks left ring installation
4. Literally, rolex watches of real brands are machine printed, while imitation watches usually have handwriting marks
5. Weight: the weight of a fake Rolex watch is generally lighter, while that of a genuine Rolex watch is heavier
6. The handlebars of fake Rolex watches are the same, but the authentic ones are of their own specifications.
4. Beijing Rolex watch repair service center is located in room 807, 8 / F, block W3, Oriental Plaza, Dongcheng District, Beijing. It is a modern watch repair service center with high-end services such as watch repair, cleaning and maintenance, testing and identification, replacement of accessories, lettering and inlaid diamond as the core. It has more than 30 clock repair experts at home and abroad, including 3 Swiss watch technical consultants, 5 national super technicians, 5 national super technicians, 3 international experts and so on National senior technician 10, junior, intermediate technician more than 10, has formed a Beijing professional maintenance service team. In order to protect the legitimate rights and interests, please bring your watch and maintenance card to the center for maintenance. Hotline: 4009020570.
5. You can't go to labor service to check the watch without invoice. The methods to distinguish Rolex from Rolex are as follows: < br > < br > look at the case and strap. The identification of the case is the most difficult part for beginners. Whether the shell shape has been polished, whether the ear piercing conforms to the prefix, whether the prefix of the shell mark is aligned with the needle, etc. all these need to check more information, do more homework, and touch more real objects. Generally, the fake Rolex watch strap is rough, especially in the case of intermediate gold, the edge of intermediate gold plating is not well treated. In the case of bending the genuine gold strap, we can see that the section is heavy and the thickness is not uniform, while the thickness of the fake is the same< Br > < br > looking at the logo, the most easily exposed part of a fake table is the logo, especially the logo on the surface. If it is a metal logo, the real table is generally as bright as new, and the false table logo edge is rough, and some are not very regular; If it is lacquer characters, the true surface edge is smooth without burr, and the false surface edge is slightly opened, and the font has depth< Br > < br > in addition to routine maintenance, the watch should be sent to the brand after-sales service for repair once it has problems that it is difficult to solve. Shanghai hengshida watch Co., Ltd. is a clock service company with a long history. Professional maintenance Patek Philippe, Constantine, Wanguo, Abbey, Earl, Baoji, zhenlishi, glaxotti, Rolex, Dido, Omega, Chopin, LongQin and other world-class brand watches, as well as antique watches and customized high-end watch strap, and can provide regular maintenance for your watches< br>
6. Rolex official watch maintenance process: first of all, you should have an understanding of the watch you repaired and the fault phenomenon, including the possible causes and previous maintenance
when told that the circuit board of quartz watch is "burned" or the motor coil is broken: the circuit of quartz watch is microelectronics, only static electricity can cause breakdown damage, and the motor coil without "burned" is naturally damaged (relatively rare), but man-made damage (damage) is easier. If the motor coil is broken, the watch will not go at all. If there is no strong vibration and water and damp, the watch will not go, How can a good watch come about? The worst hand of some heartless watch repair shops is to destroy the motor coil to retaliate against customers who refuse to pay a high price for repair
gear damage is caused by broken spring or forceful needle pulling. Gear tooth damage of transmission wheel is very rare. It should be estimated that it is also caused by human beings. Using the prepared resial wheel as props to trick people is called "grabbing wheel" in jargon.
when told that the circuit board of quartz watch is "burned" or the motor coil is broken: the circuit of quartz watch is microelectronics, only static electricity can cause breakdown damage, and the motor coil without "burned" is naturally damaged (relatively rare), but man-made damage (damage) is easier. If the motor coil is broken, the watch will not go at all. If there is no strong vibration and water and damp, the watch will not go, How can a good watch come about? The worst hand of some heartless watch repair shops is to destroy the motor coil to retaliate against customers who refuse to pay a high price for repair
gear damage is caused by broken spring or forceful needle pulling. Gear tooth damage of transmission wheel is very rare. It should be estimated that it is also caused by human beings. Using the prepared resial wheel as props to trick people is called "grabbing wheel" in jargon.
7. Yes, identification is a free item
play often: mechanical watches are not worn often, which is harmful to watch maintenance. Mechanical watches are oiled. If they don't run for a long time, the gear and escapement system inside can't get uniform and proper lubrication. With the increase of time, watches that don't take them all the year round will generally have more errors in travel time
regular maintenance: at ordinary times, pay attention to watch not to touch more acid-base things (such as taking watch to make soap), not to collide strongly, as far as possible away from the magnetic field (such as microphone and other things), not to get close to steam. For a watch with good sealing, st is not easy to enter the watch machine, and the lubricating oil is not easy to volatilize, disperse and deteriorate, so that it can be maintained once every 4-5 years. If the user works in a humid or sty environment, the maintenance time should be about once every two years. In a word, it is necessary to master flexibly according to the travel time of the watch. If it is found that the watch is affected by water, damp, magnetic, falling and touching, and there is a big error or stop, it should be cleaned and checked in time. The mechanical watch needs to be oiled regularly. It can be oiled once every two years. Only in this way can your beloved watch be as young as you
daily Chaining: for a mechanical watch that is manually chained, it is recommended to manually chain for 20-30 cycles for the first time, and then regularly chain the watch every day. And the mechanical table of automatic chain mainly depends on the arm movement automatic chain, if the chain is insufficient, then manual chain supplement. Generally, the mechanical watch with excellent design has the design of full string automatic slipping, so as to prevent the watch from breaking if the wind is too tight. As a result, one day's winding is not enough.
play often: mechanical watches are not worn often, which is harmful to watch maintenance. Mechanical watches are oiled. If they don't run for a long time, the gear and escapement system inside can't get uniform and proper lubrication. With the increase of time, watches that don't take them all the year round will generally have more errors in travel time
regular maintenance: at ordinary times, pay attention to watch not to touch more acid-base things (such as taking watch to make soap), not to collide strongly, as far as possible away from the magnetic field (such as microphone and other things), not to get close to steam. For a watch with good sealing, st is not easy to enter the watch machine, and the lubricating oil is not easy to volatilize, disperse and deteriorate, so that it can be maintained once every 4-5 years. If the user works in a humid or sty environment, the maintenance time should be about once every two years. In a word, it is necessary to master flexibly according to the travel time of the watch. If it is found that the watch is affected by water, damp, magnetic, falling and touching, and there is a big error or stop, it should be cleaned and checked in time. The mechanical watch needs to be oiled regularly. It can be oiled once every two years. Only in this way can your beloved watch be as young as you
daily Chaining: for a mechanical watch that is manually chained, it is recommended to manually chain for 20-30 cycles for the first time, and then regularly chain the watch every day. And the mechanical table of automatic chain mainly depends on the arm movement automatic chain, if the chain is insufficient, then manual chain supplement. Generally, the mechanical watch with excellent design has the design of full string automatic slipping, so as to prevent the watch from breaking if the wind is too tight. As a result, one day's winding is not enough.
8. 1、 The identification of watch case is the most difficult part for beginners. Whether the shell shape has been polished, whether the ear piercing conforms to the prefix, whether the prefix of the shell mark is aligned with the needle, etc. all these need to check more information, do more homework, and touch more real objects. Here I only talk about the most superficial identification. One of the common faults of fake watches is that one of its shell types is used in multiple watches. For example, 16233 is often engraved on the case of 16234. The case of 16613 is engraved with 16610 and so on. Because it needs mass proction, the case that can be used for general purpose will not be made separately, so as to rece the cost
Jin Lao wants to see the Queen's head on the back of the ear It's really clear! It's very deep! Notice that there is a G letter under the picture! It's even harder to the logo that day! 750 words on both sides of the balance plate triangle rope! And wave pattern! It should be very clear! As shown in the table above, these two marks are ambiguous---- There's no doubt that it's a gold shell< Most of the words on the surface of the fake watch are rough, and many of them are crooked in the night light (the old real watch also has a lot of crooks, and the new watch generally will not have such mistakes). The labor standard and inlaid diamond are also often crooked. As for whether the drill is white or transparent, and whether the face is reversed, we need to have a deeper understanding and identify & quot; Pure false table & quot; I don't use that much. Calendars are also a problem often overlooked by fake tables. Mainly divided into font and calendar box opening two points, often see real labor is easy to remember labor's calendar font. More comparison will show. The most problems of calendar box are the fit of the frame and calendar disk, the uneven opening of the frame and the calendar. The second hand of the original Rolex gold hand is semi cylindrical, even the interface with the pin disc is semi-circular<
primary points:
1. Roughly check whether the luminous points are on the corresponding scale
2. Check whether the two sides of the drill are on the right upper scale (except D-D 1:11)
3. Check whether the calendar is offset
4. Check whether the semicircular type can be observed at the pin disc of the second hand
3 It is easy for beginners to master the magnifying glass and laser anti-counterfeiting. In the early days, the magnifying glass of the fake watch didn't work. Looking at the calendar through it, it was still so small, but now the fake watch basically has no such problem. The laser anti-counterfeiting of the fake watch is very easy to see, but it is very difficult for the real watch to see it. Fortunately, the black face is not easy to say, the white face is by no means easy. The main technological difference is that if the small crown is observed through eyepiece or digital camera, the real watch is composed of 152 moment points, the match head is composed of 7 points, and the open circle is composed of 14 points. Because of the process, the false meter will not reach these figures. Of course, when we get the table, no one can identify it by looking up the dots<
primary points:
1. Whether the magnifying glass can magnify
2. The laser mark on the false watch is easy to see and the moment point is thick
4. Pay attention to the labor mark on the head. The real head is commonly known as "open mouth smile", and the fake head is called "shut up". A comparison shows that
5
5. Watch strap is a part of false watch that is easy to ignore, and errors often appear here. As long as you pay a little attention, you can find the defects caused by mistakes. We introce it in two parts: solid strap and hollow strap:
1. Hollow strap
the following words are quoted from PP: one pick, two fold, three smooth, there is no place to hide the port loading soil belt
pick, which means that from the reverse side of most of the port loading soil belts, the gold part is slightly lower than the steel part, and the pick is a little lower, while the combination of the two parts of the original pick is smooth
folding is to see the special shape inside the gold part, while the gold part of the port loading soil belt can't make that special radian
stroking is the smoothness and softness of stroking belt. It can also check whether the belt has been glued or clamped. If you stroked more, you will know if it is true or not! If you have done or clipped, you can judge the characteristics of the joint head by looking at the luster and angle of the edge.
Jin Lao wants to see the Queen's head on the back of the ear It's really clear! It's very deep! Notice that there is a G letter under the picture! It's even harder to the logo that day! 750 words on both sides of the balance plate triangle rope! And wave pattern! It should be very clear! As shown in the table above, these two marks are ambiguous---- There's no doubt that it's a gold shell< Most of the words on the surface of the fake watch are rough, and many of them are crooked in the night light (the old real watch also has a lot of crooks, and the new watch generally will not have such mistakes). The labor standard and inlaid diamond are also often crooked. As for whether the drill is white or transparent, and whether the face is reversed, we need to have a deeper understanding and identify & quot; Pure false table & quot; I don't use that much. Calendars are also a problem often overlooked by fake tables. Mainly divided into font and calendar box opening two points, often see real labor is easy to remember labor's calendar font. More comparison will show. The most problems of calendar box are the fit of the frame and calendar disk, the uneven opening of the frame and the calendar. The second hand of the original Rolex gold hand is semi cylindrical, even the interface with the pin disc is semi-circular<
primary points:
1. Roughly check whether the luminous points are on the corresponding scale
2. Check whether the two sides of the drill are on the right upper scale (except D-D 1:11)
3. Check whether the calendar is offset
4. Check whether the semicircular type can be observed at the pin disc of the second hand
3 It is easy for beginners to master the magnifying glass and laser anti-counterfeiting. In the early days, the magnifying glass of the fake watch didn't work. Looking at the calendar through it, it was still so small, but now the fake watch basically has no such problem. The laser anti-counterfeiting of the fake watch is very easy to see, but it is very difficult for the real watch to see it. Fortunately, the black face is not easy to say, the white face is by no means easy. The main technological difference is that if the small crown is observed through eyepiece or digital camera, the real watch is composed of 152 moment points, the match head is composed of 7 points, and the open circle is composed of 14 points. Because of the process, the false meter will not reach these figures. Of course, when we get the table, no one can identify it by looking up the dots<
primary points:
1. Whether the magnifying glass can magnify
2. The laser mark on the false watch is easy to see and the moment point is thick
4. Pay attention to the labor mark on the head. The real head is commonly known as "open mouth smile", and the fake head is called "shut up". A comparison shows that
5
5. Watch strap is a part of false watch that is easy to ignore, and errors often appear here. As long as you pay a little attention, you can find the defects caused by mistakes. We introce it in two parts: solid strap and hollow strap:
1. Hollow strap
the following words are quoted from PP: one pick, two fold, three smooth, there is no place to hide the port loading soil belt
pick, which means that from the reverse side of most of the port loading soil belts, the gold part is slightly lower than the steel part, and the pick is a little lower, while the combination of the two parts of the original pick is smooth
folding is to see the special shape inside the gold part, while the gold part of the port loading soil belt can't make that special radian
stroking is the smoothness and softness of stroking belt. It can also check whether the belt has been glued or clamped. If you stroked more, you will know if it is true or not! If you have done or clipped, you can judge the characteristics of the joint head by looking at the luster and angle of the edge.
9. Where did you buy your Rolex? If it is purchased at Rolex counter, there is no problem of buying fake goods at all. If it's a second-hand watch purchased online, you can identify it for free by any watch repair agency. Take it
10. Address: room 602, 6 / F, block W3, Oriental Plaza, No. 1, East Chang'an Street, Dongcheng District, Beijing
Center Address: room 1102, block D, world trade (Huaxi International Center), no.6, Jianguomenwai street, Chaoyang District, Beijing
address: room 808, 8 / F, block E1, Oriental Plaza, East Chang'an Street, Dongcheng District, Beijing
Customer Service Center: we will provide you with the whole process of customer service management, such as watch repair, maintenance and cleaning, beauty appraisal, etc., and provide convenient services, such as flash mail, appointment for repair, and fully protect your customer rights
warm tips: the center is equipped with advanced professional testing tools, maintenance equipment and instruments. It also has a standard reception hall, an independent VIP passenger room, a comfortable rest area, considerate service and honest professional ethics to provide you with high-quality hour meter maintenance service.
Center Address: room 1102, block D, world trade (Huaxi International Center), no.6, Jianguomenwai street, Chaoyang District, Beijing
address: room 808, 8 / F, block E1, Oriental Plaza, East Chang'an Street, Dongcheng District, Beijing
Customer Service Center: we will provide you with the whole process of customer service management, such as watch repair, maintenance and cleaning, beauty appraisal, etc., and provide convenient services, such as flash mail, appointment for repair, and fully protect your customer rights
warm tips: the center is equipped with advanced professional testing tools, maintenance equipment and instruments. It also has a standard reception hall, an independent VIP passenger room, a comfortable rest area, considerate service and honest professional ethics to provide you with high-quality hour meter maintenance service.
Hot content