D0t digital currency
Publish: 2021-04-13 07:44:45
1. All high-end graphics cards have gone up in price
for example, gtx1060 6G 1070 1080 1080ti and 1050ti 4G
amd RX 560 and above all series
RX 470 480 and so on
old high-end graphics cards with video memory larger than 4G have also gone up
for example, gtx1060 6G 1070 1080 1080ti and 1050ti 4G
amd RX 560 and above all series
RX 470 480 and so on
old high-end graphics cards with video memory larger than 4G have also gone up
2. Okex is a fraud platform. Don't be cheated. I'll sort out the pictures and send them to you to avoid being cheated
3. This refers to the abbreviation and boiling point of brake oil
4. Let's take 11.00-20 as an example. What does the number mean
11 is the tire section width of 11 inches, and 20 is the low pressure tire with rim diameter of 20 inches What's the difference between 6.50-16 and 6.50R16? 6.50-16 refers to nylon tire, and 6.50R16 refers to radial tire, that is, steel tire. Steel tire is commonly used in cars, but rarely in trucks. Some of them are marked as: 6.50-16LT, so what does LT mean
PC -- car tire
LT -- light truck tire
TB -- truck and bus tyres
Ag - agricultural vehicle tire
OTR engineering vehicle tire
ID instrial vehicle tire
AC - aircraft tire
MC motorcycle tire
it can be seen from the above that LT stands for light truck tire. Generally, you don't need to pay attention to it. Only when you change the tire, you should pay attention to it. It must be the same. Otherwise, e to different tire pressure and load, it will cause hidden trouble to the car after replacement
most of the common radial tire marks are in the form of 215 / 70r15. The meanings of these numbers are as follows: 215 represents the tread width, in mm; the width of general tires is 145-285mm, with an interval of 10mm; 70 is the flat ratio, that is, the ratio of tire wall height to tread width. 70 represents 70%. The flat ratio of general tires is between 30% and 80%. Under normal circumstances, ordinary cars should not use tires with flat ratio > 75%, while luxury cars and high-performance sports cars recommend tires with flat ratio < 60%; R is the abbreviation of radial, which means that the tire is radiation layer structure, and 15 is the outer diameter of the rim, in inches. If there are tire marks such as: 6.00-12, it means that it is not radial tire, but bias tire. This kind of tire is rare in cars now. Because of its poor safety, load capacity and high-speed stability, it is only used in some low-grade off-road vehicles and heavy trucks
tire size: the tire size is usually represented by a group of numbers. The first number represents the tire section width, and the second one represents the rim diameter, in inches. For example, 165 / 70r14 represents a radial tire with a tire width of 165mm, a flat rate of 70 and a rim diameter of 14 inches. Some tires also contain other letters or symbols, which have special meanings: "X" means high pressure tire“ "C" stands for reinforced type& quot; B" Indicates a bias tire“ One "means low pressure tire. M. S is the abbreviation for mud and snow respectively, which means that this kind of tire is suitable for use on ice, snow and muddy roads. Thank you
11 is the tire section width of 11 inches, and 20 is the low pressure tire with rim diameter of 20 inches What's the difference between 6.50-16 and 6.50R16? 6.50-16 refers to nylon tire, and 6.50R16 refers to radial tire, that is, steel tire. Steel tire is commonly used in cars, but rarely in trucks. Some of them are marked as: 6.50-16LT, so what does LT mean
PC -- car tire
LT -- light truck tire
TB -- truck and bus tyres
Ag - agricultural vehicle tire
OTR engineering vehicle tire
ID instrial vehicle tire
AC - aircraft tire
MC motorcycle tire
it can be seen from the above that LT stands for light truck tire. Generally, you don't need to pay attention to it. Only when you change the tire, you should pay attention to it. It must be the same. Otherwise, e to different tire pressure and load, it will cause hidden trouble to the car after replacement
most of the common radial tire marks are in the form of 215 / 70r15. The meanings of these numbers are as follows: 215 represents the tread width, in mm; the width of general tires is 145-285mm, with an interval of 10mm; 70 is the flat ratio, that is, the ratio of tire wall height to tread width. 70 represents 70%. The flat ratio of general tires is between 30% and 80%. Under normal circumstances, ordinary cars should not use tires with flat ratio > 75%, while luxury cars and high-performance sports cars recommend tires with flat ratio < 60%; R is the abbreviation of radial, which means that the tire is radiation layer structure, and 15 is the outer diameter of the rim, in inches. If there are tire marks such as: 6.00-12, it means that it is not radial tire, but bias tire. This kind of tire is rare in cars now. Because of its poor safety, load capacity and high-speed stability, it is only used in some low-grade off-road vehicles and heavy trucks
tire size: the tire size is usually represented by a group of numbers. The first number represents the tire section width, and the second one represents the rim diameter, in inches. For example, 165 / 70r14 represents a radial tire with a tire width of 165mm, a flat rate of 70 and a rim diameter of 14 inches. Some tires also contain other letters or symbols, which have special meanings: "X" means high pressure tire“ "C" stands for reinforced type& quot; B" Indicates a bias tire“ One "means low pressure tire. M. S is the abbreviation for mud and snow respectively, which means that this kind of tire is suitable for use on ice, snow and muddy roads. Thank you
5. The dot mark on the tire means the U.S. Department of transportation certification. Usually, it is followed by a series of numeric letters, which respectively represent the tire's origin information and factory code. The last four digits are the tire's proction date (week and year).
6. Hello
dot "means that the tire meets the safety standards specified by the U.S. Department of transportation (DOT)“ The 11 digits and letters immediately after "dot" indicate the identification number or serial number of the tire. Dot was divided into a and 92; B\ Class C, the lowest of which is only up to the U.S. Department of transportation (DOT)
dot "means that the tire meets the safety standards specified by the U.S. Department of transportation (DOT)“ The 11 digits and letters immediately after "dot" indicate the identification number or serial number of the tire. Dot was divided into a and 92; B\ Class C, the lowest of which is only up to the U.S. Department of transportation (DOT)
7. Dot is the abbreviation of the U.S. Department of transportation.
1. According to the U.S. law, all tires sold in the U.S. market need to pass the dot test and be engraved with dot mark on the sidewall after obtaining the certificate. Tires without dot mark are not allowed to be imported, proced and sold in the U.S. market
2. At present, the tires of these specifications proced by the company are only sold in the Chinese market, not exported to the United States, so there is no need to mold the dot logo on the sidewall.
1. According to the U.S. law, all tires sold in the U.S. market need to pass the dot test and be engraved with dot mark on the sidewall after obtaining the certificate. Tires without dot mark are not allowed to be imported, proced and sold in the U.S. market
2. At present, the tires of these specifications proced by the company are only sold in the Chinese market, not exported to the United States, so there is no need to mold the dot logo on the sidewall.
8. I don't know about this. It's better to check online. There should be an introction to this aspect.
9. hotdog
h&35;594; t&35;716; d&35;594; g]
h&35;594; t&35;716; d&35;594; g]
n.28909;- 293999;
h&35;594; t&35;716; d&35;594; g]
h&35;594; t&35;716; d&35;594; g]
n.28909;- 293999;
10. 1 (p297) - KDP crystal, l = 3cm, d = 1cm. At wavelength λ= 0.5µ 51, NE = 1. 47, 63 = 10. 510 - 12 MV1. Try to compare the longitudinal and transverse application of the crystal
Hot content