Digital currency of card breaking action
I've just been there a while ago, but the specific time is still subject to the bus station's announcement ~
the latest time from Ningbo airport to Zhujiajian is 21:50 in the evening. The time from Zhujiajian to Ningbo Airport is not very clear, the telephone number is 0580-3711111,
you can also call for consultation.
After leaving the station, take 215x, get off at shunye Street Station in Kwun Tong, walk for about 5 minutes, and then transfer to bus 86 to get to
West Kowloon or Kowloon West is located in the west of Hong Kong's Kowloon Peninsula. The area extends from Stonecutters Island to the vicinity of old Jordan Road pier. Most of the land is reclaimed from the sea. It covers an area of 334 hectares and spans Yau Tsim Mong District and Sham Shui Po District. The reclamation, known as the West Kowloon Reclamation, is one of the ten core projects of the Hong Kong airport core project
West Kowloon can be roughly divided into Stonecutters Island, Sham Shui Po West, Olympic Station area and Kowloon Station area. The main roads running through West Kowloon include West Kowloon Highway, Shenwang road and Lianxiang road; The railways include Tung Chung Line, airport express line and west rail
extended information:
1. Stonecutters Island was the naval headquarters of British forces in Hong Kong when it did not merge with the Kowloon Peninsula. After merging with the Kowloon Peninsula, the south side of the former Navy headquarters became the naval base of the PLA stationed in Hong Kong, and the north side became container terminal 8. In addition, the Stonecutters Island section of route 8 will be built on Stonecutters Island. The completed Stonecutters Island Bridge will connect route 8 directly to Hong Kong International Airport
The original site of the Olympic Station is a part of youmadi typhoon shelter. After reclamation, Yau Ma Tei typhoon shelter moved westward to the waterfront of the newly reclaimed area. Due to the proximity of the Olympic Station to Mong Kok commercial area and the convenient transportation of Tung Chung Line, HSBC center, Bank of China Center and Olympic mall were completed one after another, making the Olympic Station the main commercial and residential area in West Kowloon2,
opening VMware and installing RedHat
linux
3,
are all ready, start network configuration
4,
let VMware
Network
adapter
VMnet8 automatically obtain IP address and DNS server address, then we open ms-doc console and execute ipconfig
/ all command, Look at the IP allocation of VMnet8< The IP address configuration of my VMware
Network
adapter
VMnet8 virtual network card is as follows:
5,
open the VMware software and select the menu VM - & gt; Set the network
connection to C ustom:Special
virtual
network
--
VMnet8(NAT) OK, return to the main interface of the software. Start RedHat
linux
9 system, and then we need to set the IP of the virtual system to the same network segment (here I am 192.168.65.0, your IP address may be different, this is an IP address automatically and randomly assigned by VMware)
from the command line, you can edit the / etc / sysconfig / network scripts / ifcfg-eth0 file as follows:
device = eth0
bootproto = none
broadcast = 192.168.65.255
IPADDR = 192.168.65.228
netmask = 255.255.255.0
network = 192.168.65.0
onboot = yetype = Ethernet user CTL = nopeerdns = nogateway = 192.168.65.2
DHCP_ Hostname = 192.168.65.254
after saving the settings, reactivate eth0 port:
#
Service
Network
Restart
IP address can be assigned by DHCP server, because after installing VMware, there will be a virtual DHCP server virtual machine to assign IP address. This DHCP server is actually a system service, which can be assigned in the "control panel & # 173- Management tools- You can see this service in "service"
in NAT mode network, the gateway of virtual machine points to 192.168. X.2,
in this paper, x = 65,
this is the address of virtual NAT server, which is also a server virtual machine, which can be seen in service management
6,
in this way, WINXP and Linux can ping each other. If you can't Ping, see if your Windows Firewall doesn't allow ICMP
7,
next, we want another PC to be able to SSH login and access the virtual Linux system in the configured PC through LAN. Here we need to do a mapping. Open manage
virtual
Network
(in the start menu or in the VMware interface menu). Open the NAT page and click Edit.. - & gt< br />Port
Forwarding…
->< br />Add..< br />Host
P ort:22
(port to be mapped in host)
forwarding
IP
address
:
192.168.65.228
22
(IP to be mapped, which port)
Description:
vmlinux
SSH
port
(brief description)
8, OK, if you want to visit each other's virtual machine, the same configuration can be used for another PC
warm tips: the above contents are for reference only. According to the notice and announcement issued by the people's Bank of China and other departments, virtual currency is not issued by the monetary authority, does not have legal compensation and mandatory monetary attributes, is not a real currency, does not have the same legal status as currency, cannot and should not be used as currency in the market circulation, citizens' investment and transaction of virtual currency is not protected by law
response time: March 24, 2021. Please refer to the official website of Ping An Bank for the latest business changes
[Ping An Bank I know] want to know more? Come and see "Ping An Bank I know" ~
https://b.pingan.com.cn/paim/iknow/index.html
VMware provides three working modes: bridged mode, NAT mode and host only mode. If you want to use them properly in network management and maintenance, you should first understand these three working modes
-
bridged (bridging mode)
in this mode, the virtual operating system of VMware is like an independent host in the LAN, which can access any machine in the network. In bridge mode, you need to manually configure the IP address and subnet mask for the virtual system, and be in the same network segment as the host machine, so that the virtual system can communicate with the host machine. At the same time, because the virtual system is an independent host system in the LAN, you can manually configure its TCP / IP configuration information to access the Internet through the gateway or router of the LAN
-
host only (host mode)
in some special network debugging environment, it is required to separate the real environment from the virtual environment, then you can use the host only mode. In host only mode, all virtual systems can communicate with each other, but the virtual system and the real network are isolated
-
nat (network address translation mode)
using NAT mode is to let the virtual system access the public network through the host machine's network with the help of NAT (network address translation) function. In other words, using NAT mode can achieve access to the Internet in the virtual system. The TCP / IP configuration information of the virtual system in NAT mode is provided by the DHCP server of VMnet8 (NAT) virtual network, which can't be modified manually, so the virtual system can't communicate with other real hosts in this LAN
if you want to use VMware to install a new virtual system, and you can directly access the Internet without any manual configuration in the virtual system, it is recommended that you use NAT mode