ABAP digital conversion currency code
Publish: 2021-03-28 06:20:52
1.
To convert a number to a currency number is to set the value cell format to currency format. The following steps are as follows:
-
select the cell to be set, right-click to select the cell format
-
to open the cell Format dialog box, click the number tab (the general default number tab is activated)
-
to select the currency symbol and decimal point according to your own needs, Then determine the specific recording operation of
< / OL >
as shown in the following figure:
2. Ore (part of the world is nihilistic)
blood stone ore nevermine:oreBloodstone
Amethyst ore nevermine:oreAmethyst
sternal fragment nevermine:oreChestFragments
microcrystalline ore nevermine:oreCrystallite
emberite ore nevermine:oreEmberstone
foot bone fragments nevermine:oreFootFragments
jadeite ore nevermine:oreJade
never mine:oreLegFragments
sulfur copper antimony ore nevermine:oreRosite
limonite nevermine:oreLimonite
sapphire ore nevermine:oreSapphire
skull fragments nevermine:oreSkullFragments
mysterious ore nevermine:oreMystite
steel block nevermine:oreLyon
gloomy ore nevermine:oreGhastly
fear nevermine:oreGhoulish
magnesite stone nevermine:oreVarsium
titanium ore nevermine:oreElecanium
pyrite potassium ore nevermine:oreBaronyte
void ore nevermine:oreBlazium
electromagnetic uranium ore nevermine:oreChargedRunium
purple crystal ore nevermine:oreCrystalPurple
Blue crystal ore nevermine:oreCrystalBlue
green crystal ore nevermine:oreCrystalGreen
yellow water Crystal ore nevermine:oreCrystalYellow
Red crystal ore nevermine:oreCrystalRed
white crystal ore nevermine:oreCrystalWhite
axe
mining pick tool
skeleton pick nevermine:grounderSkeletal
Amethyst pick nevermine:AmethystPickaxe
brown iron pick nevermine:LimonitePickaxe
sulfur copper antimony pickaxe nevermine:RositePickaxe
nevermin e: Sapphire pickaxe
ember pick nevermine:EmberstonePickaxe
skeleton pick nevermine:SkeletalPickaxe
/veinminer blocklist pickaxe add nevermine:oreLimonite
blood stone ore nevermine:oreBloodstone
Amethyst ore nevermine:oreAmethyst
sternal fragment nevermine:oreChestFragments
microcrystalline ore nevermine:oreCrystallite
emberite ore nevermine:oreEmberstone
foot bone fragments nevermine:oreFootFragments
jadeite ore nevermine:oreJade
never mine:oreLegFragments
sulfur copper antimony ore nevermine:oreRosite
limonite nevermine:oreLimonite
sapphire ore nevermine:oreSapphire
skull fragments nevermine:oreSkullFragments
mysterious ore nevermine:oreMystite
steel block nevermine:oreLyon
gloomy ore nevermine:oreGhastly
fear nevermine:oreGhoulish
magnesite stone nevermine:oreVarsium
titanium ore nevermine:oreElecanium
pyrite potassium ore nevermine:oreBaronyte
void ore nevermine:oreBlazium
electromagnetic uranium ore nevermine:oreChargedRunium
purple crystal ore nevermine:oreCrystalPurple
Blue crystal ore nevermine:oreCrystalBlue
green crystal ore nevermine:oreCrystalGreen
yellow water Crystal ore nevermine:oreCrystalYellow
Red crystal ore nevermine:oreCrystalRed
white crystal ore nevermine:oreCrystalWhite
axe
mining pick tool
skeleton pick nevermine:grounderSkeletal
Amethyst pick nevermine:AmethystPickaxe
brown iron pick nevermine:LimonitePickaxe
sulfur copper antimony pickaxe nevermine:RositePickaxe
nevermin e: Sapphire pickaxe
ember pick nevermine:EmberstonePickaxe
skeleton pick nevermine:SkeletalPickaxe
/veinminer blocklist pickaxe add nevermine:oreLimonite
3. Leadership is the power to call on employees to carry out certain behaviors.
4. Bit rate: the number of bits transmitted per second, represented by B / S (B represents bit)
for example, if the data transmission rate is 120 characters / second and each character is 10 bits, the bit rate transmitted is 10 × 120 = 1200 bits / S = 1200 baud
give me the best answer
for example, if the data transmission rate is 120 characters / second and each character is 10 bits, the bit rate transmitted is 10 × 120 = 1200 bits / S = 1200 baud
give me the best answer
5. Bitcomputing power is a new business jointly established by 58coin exchange and miner manufacturers, mine pools and mine owners. Users can enjoy stable mining service by paying miner fees, electricity fees and management fees. Users can view it at any time in the background. The current business includes miner sales and custody, miner leasing and standard cloud computing power.
6. The so-called 1 Megabyte of 1 Megabyte download is 1MB. Note that the download speed of lowercase B is 1024KB = 128KB (here B is uppercase)
1byte = 8bit
so
1byte = 8bit
so
7. ABAP data type is automatically converted. If you want to learn ABAP, you can only enter the consulting company to participate in the project. As far as I know, the only book introcing ABAP language development in China is SAP programming, which was written by a Singaporean, and it's not bad. According to my experience, only by combining business can we really learn ABAP well.
8. Bit rate
the rate at which a digital channel transmits a digital signal is called data transmission rate or bit rate.
the word bit rate has many translations, such as bit rate, which means how many bits are needed to represent the encoded (compressed) audio data per second, and bit is the smallest unit in binary, either 0 or 1. The relationship between bit rate and audio and video compression is simply that the higher bit rate is, the better the quality of treble video is, but the larger the encoded file is; If the bit rate is less, the situation just reverses
for example, 500kbps is used to encode audio and video
where
BPS is
bit 1K =
1010 = 1024
b is bit
s is second
P is per
so, To encode the encoded audio and video data at 500kbps, 500K bits per second are needed to represent
in baseband transmission system, bit rate is used to represent the transmitted information bit rate. Bit rate RB refers to the number of binary bits transmitted per unit time, The unit is B / s. for example, the transmission code rate of computer serial port is up to 115200b / s.
symbol rate or baud rate RS refers to the number of molation symbols transmitted in unit time, that is, the information transmission rate of ternary and ternary multi-element digital code stream on
with baud / s.
in M-ary molation, the unit is baud / s, The relationship between bit rate Rb and baud rate RS is as follows:
RB = rslog2m
sampling rate refers to the ratio of sampling samples to total samples, and sampling rate is the number of samples per unit time. If the sampling rate is 40 MSA / s, the number of samples per second is 40 m, but 40 MHz cannot be used
the process of converting analog audio into digital audio is called sampling, which simply means how many data are needed to record a sound of one second in length by waveform sampling. 44KHz sampling rate of sound is to spend 44000 data to describe a second of sound waveform. In principle, the higher the sampling rate, the better the sound quality.
the rate at which a digital channel transmits a digital signal is called data transmission rate or bit rate.
the word bit rate has many translations, such as bit rate, which means how many bits are needed to represent the encoded (compressed) audio data per second, and bit is the smallest unit in binary, either 0 or 1. The relationship between bit rate and audio and video compression is simply that the higher bit rate is, the better the quality of treble video is, but the larger the encoded file is; If the bit rate is less, the situation just reverses
for example, 500kbps is used to encode audio and video
where
BPS is
bit 1K =
1010 = 1024
b is bit
s is second
P is per
so, To encode the encoded audio and video data at 500kbps, 500K bits per second are needed to represent
in baseband transmission system, bit rate is used to represent the transmitted information bit rate. Bit rate RB refers to the number of binary bits transmitted per unit time, The unit is B / s. for example, the transmission code rate of computer serial port is up to 115200b / s.
symbol rate or baud rate RS refers to the number of molation symbols transmitted in unit time, that is, the information transmission rate of ternary and ternary multi-element digital code stream on
with baud / s.
in M-ary molation, the unit is baud / s, The relationship between bit rate Rb and baud rate RS is as follows:
RB = rslog2m
sampling rate refers to the ratio of sampling samples to total samples, and sampling rate is the number of samples per unit time. If the sampling rate is 40 MSA / s, the number of samples per second is 40 m, but 40 MHz cannot be used
the process of converting analog audio into digital audio is called sampling, which simply means how many data are needed to record a sound of one second in length by waveform sampling. 44KHz sampling rate of sound is to spend 44000 data to describe a second of sound waveform. In principle, the higher the sampling rate, the better the sound quality.
9. Hello
hold down the shift key and then press 4 keys
it's OK
there's nothing in word
it only represents personal opinions, don't spray if you don't like it, thank you.
hold down the shift key and then press 4 keys
it's OK
there's nothing in word
it only represents personal opinions, don't spray if you don't like it, thank you.
10. Two concepts:
1) computer terminology, a unit of information, is transliterated from English bit. The information contained in one bit of binary number is one bit. For example, the binary number 0101 is four bits
2) the bit in binary number, the unit of measurement of information quantity, is the smallest unit of information quantity. In digital audio, electric pulse is used to express audio signal, "1" represents pulse, "0" represents pulse interval. If the information of each point on the waveform is represented by a group of four bit codes, it is called four bits. The higher the number of bits, the more accurate the expression of analog signal is, and the stronger the ability to restore audio signal is< In binary number system, each 0 or 1 is a bit, and bit is the smallest unit of data storage. Among them, 8bit is called a byte. The number of CPU bits in a computer refers to the maximum number of bits that a CPU can handle at a time. For example, the CPU of a 32-bit computer can process up to 32 bits of data at a time
bit, the abbreviation of binary digit, is a term proposed by mathematician John Wilder Tukey (it may have been proposed in 1946, but it is said that it was proposed in 1943). This term was first formally used on page 1 of Shannon's famous "information theory", namely "a mathematical theory of communication"
suppose that an event occurs in the form of a or B, and the probability of occurrence of a and B is equal, which is 0.5, then a binary can be used to represent one of a or B. For example:
1) binary can be used to indicate a simple positive / negative judgment,
2) switch with two states (such as light switch),
3) on / off of triode,
4) whether there is voltage on a wire, or
5) logical yes / no of an image extraction, etc
e to the length change after being converted into binary, the amount of information of one bit in different number systems is not always a binary, and its corresponding relationship is logarithmic, for example, one digit in octal, octal is equivalent to three binary. In addition to binary, there are octal, decimal, and hexadecimal octal, decimal, and hexadecimal octal, decimal, and hexadecimal, etc
abbreviation power
kilobit kbit 10 ^ 3 kibibit kibit 2 ^ 10
megabit Mbit 10 ^ 6 mebibit mibit 2 ^ 20
Gigabit Gbit 10 ^ 9 gibbit gibit 2 ^ 30
terabit Tbit 10 ^ 12 tebibit Tibit 2 ^ 40
petabit PBIT 10 ^ 15 pebibit pibit 2 ^ 50
Exit EBIT 10 ^ 18 exit EBIT 2 ^ 60
zettabit zbit 10 ^ 21 Zebibit zibit 2 ^ 70
yottabit ybit 10 ^ 24 yobibit yibit 2 ^ 80
edit the basic structure of single bit and multi bit
digital converter in this section, which is usually divided into receiving, digital filtering, digital / class conversion, I / V conversion, analog amplification and other parts. The following is a brief explanation of digital filtering and number / class conversion
the sampling frequency of CD is 44.1KHz, which is based on Nyquist's sampling theory. He believes that the sampling frequency should be at least twice of the original signal in order to change the analog signal into discrete time. The hearing limit of the human ear is about 20kHz, so Philips set it at 44.1KHz when it launched the CD in 1982. Sampling is the first step to convert analog signal into digital signal, but the precision is still too rough, so the technology of supersampling appeared. In general, eight times of ultra sampling is equivalent to increasing the sampling frequency to 352.8khz. On the one hand, the accuracy is improved. On the other hand, the analog signal generated after DAC is relatively complete. The frequency and slope of the required low-pass filter (ultra-high frequency generated ring filtering and sampling) can be greatly reced, and the phase error and distortion will be greatly improved. However, CD is sampled every 0.00002 seconds. After oversampling, there will be many gaps between the samples. At this time, some inserted samples are needed to keep the signal intact, and this task falls on the digital filter. The more advanced design is to calculate by DSP (digital signal processor) and obtain a smooth curve by ultra-high sampling, such as Krell's 64 times super sampling. But at present, only theta, Wadia, Krell and vimak have such technology. Another kind of digital filtering is to combine complex programs with chips in advance, which has functions similar to DSP. Denon and pioneer in Japan have such designs. The most common method is to use the chips proced in large quantities. Both NPC and burr Brown have finished procts. Of course, the effect will be limited
after digital filtering, it enters DAC. From here, there is the difference between single bit and multi bit. Multi bit means that the digital signal passes through a current switch and becomes a current output of different sizes. Because the digital signal is binary, the current of the DAC is also arranged in multiples of 1, 2, 4 and 8. Each bit controls a power distributor. As the music signal changes, the output current also changes. Then there is a fast I / V conversion circuit, which turns the current into voltage, and then goes through a low-pass filter. The complete analog signal appears. A 20 bit DAC, its output current change is 1048576, the resolution has been quite high. Now the most commonly used 20 bit chips are burr Brown's pcm-63 and improved pcm-1702, and the most expensive ones are probably ultra analog moles
bitstream is a technology proposed by Philips in 1988, and its structure is very simple. First, the binary digital signal enters a mole with a reference voltage. If the input signal is higher than the reference voltage, the output is non curvilinear, otherwise it is 0; When the second signal is compared with the first signal, the higher one outputs 1, the lower one outputs 0... And so on. Because it only compares the size of the sample, it needs a higher sampling frequency to increase the sample size, from 256 times in the early stage to 384 times in the latest stage, which is a good example. Only one bit of signal will go into a DAC called switched capacitor and be restored to analog signal. The commonly used single bit chips are made by Philips. Saa7320 was the first one, and now saa7350 and tda1547 are combined together to be called dac7 circuit. Crystal also has similar procts
there is no final conclusion on which is the best. The only certainty is that most of the high price models are multi bit designs
Edit this paragraph bit rate
the word bit rate has many translations, such as bit rate, which means how many bits are needed to represent the encoded (compressed) audio data per second, and bit is the least unit in binary system, either 0 or 1. The relationship between bit rate and audio compression is simply that the higher the bit rate, the better the sound quality, but the larger the encoded file is; If the bit rate is less, the situation just reverses
VBR (variable bitrate) dynamic bitrate means that there is no fixed bitrate. When compressing, the compression software immediately determines which bitrate to use according to the audio data. This is a way that takes the quality as the premise and takes into account the file size, and the coding mode is recommended
ABR (average bitrate) is an interpolation parameter of VBR. Lame creates this coding mode for the poor volume ratio of CBR files and the variable size of VBR generated files. ABR in the specified file size, every 50 frames (30 frames about 1 second) as a segment, low frequency and insensitive frequency use relatively low traffic, high frequency and large dynamic performance use high traffic, can be used as a compromise between VBR and CBR
CBR (constant bitrate), constant bitrate refers to the bit rate of a file from beginning to end. Compared with VBR and ABR, the compressed file volume is large, and the sound quality will not be significantly improved compared with VBR and ABR
the physical factor that affects the size of sound is the amplitude. The sound on the computer must also be able to accurately represent the soft sound of the music, so it is necessary to have an accurate description of the amplitude of the sound wave. "Bit" is such a unit. X-bit refers to dividing the amplitude of the waveform into x-th power of 2, and dividing it into a certain level according to the soft sound of the analog signal, It can be expressed in numbers. The higher the bit rate is, the more detailed it can reflect the change of soft sound
in order to reflect the normal sound information, 16bit is the basic requirement, and better CDs use 20bit or even 24bit. What about CS? It's a pass at most. Not to mention the sound channel, even MP3 is 2 channel
to put it bluntly, the bit rate is the number of bits transmitted per second
8bit = 1b. If 8bit data can be transmitted per second on a line, it is said that the bit rate of this line is 8bps (bit per second)< Bitdogs and Pit Bull Terriers are native to the United States, also known as American bitdogs. Originated in the 19th century, bitdogs are mainly bred by American Staffordshire terrier and American bull dog. American Bulldogs weigh a wide range, from 30 kg to 58 kg
also known as American bitdog, bitbulldog. Made in the United States in the 19th century. It is mainly bred by American bulldog and American staff, with big difference in body size
the biter's head is broad and slate shaped, and its jaws are strong and powerful. The bite force per square centimeter can reach 80 kg. This dog is good at running continuously and has amazing enrance. Tenacious fighting spirit and tenacious temperament also make it an excellent bulldog. It is said that as long as it bites the opponent, it will not spill. The compact body structure, strong muscles and painless skin seem to be born for bullfighting! This is also the biggest magic weapon for this dog to dominate the dog fighting world for more than 100 years
although bitdogs are fierce to their opponents, they are absolutely loyal to their owners
some people also call the spirit of people who are tough and indomitable and courageous as "bit spirit"
a 45 cm tall and 30 kg weight bit can bite a 95 cm tall and 100 kg weight Caucasian dog to the ground in a few minutes. Bitdog's bone is more than 3 times harder than other dogs, and will not be bitten and fractured by other dogs. The bite force of teeth can reach more than 80kg per square centimeter! It also has a tough and painless skin with well-developed muscles to resist biting. It also has good enrance and can run more than 200 kilometers continuously on the treadmill
the article you are reading is from Acacia red bean forum http://www.3413.cn , original address: http://www.3413.cnread.php?tid=18314
1) computer terminology, a unit of information, is transliterated from English bit. The information contained in one bit of binary number is one bit. For example, the binary number 0101 is four bits
2) the bit in binary number, the unit of measurement of information quantity, is the smallest unit of information quantity. In digital audio, electric pulse is used to express audio signal, "1" represents pulse, "0" represents pulse interval. If the information of each point on the waveform is represented by a group of four bit codes, it is called four bits. The higher the number of bits, the more accurate the expression of analog signal is, and the stronger the ability to restore audio signal is< In binary number system, each 0 or 1 is a bit, and bit is the smallest unit of data storage. Among them, 8bit is called a byte. The number of CPU bits in a computer refers to the maximum number of bits that a CPU can handle at a time. For example, the CPU of a 32-bit computer can process up to 32 bits of data at a time
bit, the abbreviation of binary digit, is a term proposed by mathematician John Wilder Tukey (it may have been proposed in 1946, but it is said that it was proposed in 1943). This term was first formally used on page 1 of Shannon's famous "information theory", namely "a mathematical theory of communication"
suppose that an event occurs in the form of a or B, and the probability of occurrence of a and B is equal, which is 0.5, then a binary can be used to represent one of a or B. For example:
1) binary can be used to indicate a simple positive / negative judgment,
2) switch with two states (such as light switch),
3) on / off of triode,
4) whether there is voltage on a wire, or
5) logical yes / no of an image extraction, etc
e to the length change after being converted into binary, the amount of information of one bit in different number systems is not always a binary, and its corresponding relationship is logarithmic, for example, one digit in octal, octal is equivalent to three binary. In addition to binary, there are octal, decimal, and hexadecimal octal, decimal, and hexadecimal octal, decimal, and hexadecimal, etc
abbreviation power
kilobit kbit 10 ^ 3 kibibit kibit 2 ^ 10
megabit Mbit 10 ^ 6 mebibit mibit 2 ^ 20
Gigabit Gbit 10 ^ 9 gibbit gibit 2 ^ 30
terabit Tbit 10 ^ 12 tebibit Tibit 2 ^ 40
petabit PBIT 10 ^ 15 pebibit pibit 2 ^ 50
Exit EBIT 10 ^ 18 exit EBIT 2 ^ 60
zettabit zbit 10 ^ 21 Zebibit zibit 2 ^ 70
yottabit ybit 10 ^ 24 yobibit yibit 2 ^ 80
edit the basic structure of single bit and multi bit
digital converter in this section, which is usually divided into receiving, digital filtering, digital / class conversion, I / V conversion, analog amplification and other parts. The following is a brief explanation of digital filtering and number / class conversion
the sampling frequency of CD is 44.1KHz, which is based on Nyquist's sampling theory. He believes that the sampling frequency should be at least twice of the original signal in order to change the analog signal into discrete time. The hearing limit of the human ear is about 20kHz, so Philips set it at 44.1KHz when it launched the CD in 1982. Sampling is the first step to convert analog signal into digital signal, but the precision is still too rough, so the technology of supersampling appeared. In general, eight times of ultra sampling is equivalent to increasing the sampling frequency to 352.8khz. On the one hand, the accuracy is improved. On the other hand, the analog signal generated after DAC is relatively complete. The frequency and slope of the required low-pass filter (ultra-high frequency generated ring filtering and sampling) can be greatly reced, and the phase error and distortion will be greatly improved. However, CD is sampled every 0.00002 seconds. After oversampling, there will be many gaps between the samples. At this time, some inserted samples are needed to keep the signal intact, and this task falls on the digital filter. The more advanced design is to calculate by DSP (digital signal processor) and obtain a smooth curve by ultra-high sampling, such as Krell's 64 times super sampling. But at present, only theta, Wadia, Krell and vimak have such technology. Another kind of digital filtering is to combine complex programs with chips in advance, which has functions similar to DSP. Denon and pioneer in Japan have such designs. The most common method is to use the chips proced in large quantities. Both NPC and burr Brown have finished procts. Of course, the effect will be limited
after digital filtering, it enters DAC. From here, there is the difference between single bit and multi bit. Multi bit means that the digital signal passes through a current switch and becomes a current output of different sizes. Because the digital signal is binary, the current of the DAC is also arranged in multiples of 1, 2, 4 and 8. Each bit controls a power distributor. As the music signal changes, the output current also changes. Then there is a fast I / V conversion circuit, which turns the current into voltage, and then goes through a low-pass filter. The complete analog signal appears. A 20 bit DAC, its output current change is 1048576, the resolution has been quite high. Now the most commonly used 20 bit chips are burr Brown's pcm-63 and improved pcm-1702, and the most expensive ones are probably ultra analog moles
bitstream is a technology proposed by Philips in 1988, and its structure is very simple. First, the binary digital signal enters a mole with a reference voltage. If the input signal is higher than the reference voltage, the output is non curvilinear, otherwise it is 0; When the second signal is compared with the first signal, the higher one outputs 1, the lower one outputs 0... And so on. Because it only compares the size of the sample, it needs a higher sampling frequency to increase the sample size, from 256 times in the early stage to 384 times in the latest stage, which is a good example. Only one bit of signal will go into a DAC called switched capacitor and be restored to analog signal. The commonly used single bit chips are made by Philips. Saa7320 was the first one, and now saa7350 and tda1547 are combined together to be called dac7 circuit. Crystal also has similar procts
there is no final conclusion on which is the best. The only certainty is that most of the high price models are multi bit designs
Edit this paragraph bit rate
the word bit rate has many translations, such as bit rate, which means how many bits are needed to represent the encoded (compressed) audio data per second, and bit is the least unit in binary system, either 0 or 1. The relationship between bit rate and audio compression is simply that the higher the bit rate, the better the sound quality, but the larger the encoded file is; If the bit rate is less, the situation just reverses
VBR (variable bitrate) dynamic bitrate means that there is no fixed bitrate. When compressing, the compression software immediately determines which bitrate to use according to the audio data. This is a way that takes the quality as the premise and takes into account the file size, and the coding mode is recommended
ABR (average bitrate) is an interpolation parameter of VBR. Lame creates this coding mode for the poor volume ratio of CBR files and the variable size of VBR generated files. ABR in the specified file size, every 50 frames (30 frames about 1 second) as a segment, low frequency and insensitive frequency use relatively low traffic, high frequency and large dynamic performance use high traffic, can be used as a compromise between VBR and CBR
CBR (constant bitrate), constant bitrate refers to the bit rate of a file from beginning to end. Compared with VBR and ABR, the compressed file volume is large, and the sound quality will not be significantly improved compared with VBR and ABR
the physical factor that affects the size of sound is the amplitude. The sound on the computer must also be able to accurately represent the soft sound of the music, so it is necessary to have an accurate description of the amplitude of the sound wave. "Bit" is such a unit. X-bit refers to dividing the amplitude of the waveform into x-th power of 2, and dividing it into a certain level according to the soft sound of the analog signal, It can be expressed in numbers. The higher the bit rate is, the more detailed it can reflect the change of soft sound
in order to reflect the normal sound information, 16bit is the basic requirement, and better CDs use 20bit or even 24bit. What about CS? It's a pass at most. Not to mention the sound channel, even MP3 is 2 channel
to put it bluntly, the bit rate is the number of bits transmitted per second
8bit = 1b. If 8bit data can be transmitted per second on a line, it is said that the bit rate of this line is 8bps (bit per second)< Bitdogs and Pit Bull Terriers are native to the United States, also known as American bitdogs. Originated in the 19th century, bitdogs are mainly bred by American Staffordshire terrier and American bull dog. American Bulldogs weigh a wide range, from 30 kg to 58 kg
also known as American bitdog, bitbulldog. Made in the United States in the 19th century. It is mainly bred by American bulldog and American staff, with big difference in body size
the biter's head is broad and slate shaped, and its jaws are strong and powerful. The bite force per square centimeter can reach 80 kg. This dog is good at running continuously and has amazing enrance. Tenacious fighting spirit and tenacious temperament also make it an excellent bulldog. It is said that as long as it bites the opponent, it will not spill. The compact body structure, strong muscles and painless skin seem to be born for bullfighting! This is also the biggest magic weapon for this dog to dominate the dog fighting world for more than 100 years
although bitdogs are fierce to their opponents, they are absolutely loyal to their owners
some people also call the spirit of people who are tough and indomitable and courageous as "bit spirit"
a 45 cm tall and 30 kg weight bit can bite a 95 cm tall and 100 kg weight Caucasian dog to the ground in a few minutes. Bitdog's bone is more than 3 times harder than other dogs, and will not be bitten and fractured by other dogs. The bite force of teeth can reach more than 80kg per square centimeter! It also has a tough and painless skin with well-developed muscles to resist biting. It also has good enrance and can run more than 200 kilometers continuously on the treadmill
the article you are reading is from Acacia red bean forum http://www.3413.cn , original address: http://www.3413.cnread.php?tid=18314
Hot content