6800 Ethereum

1. Cartoon farm players have two warehouses, granary and warehouse
the upgrade of granary needs: panels, screws and box nails
warehouse upgrade needs: wood, bolts and tape
therefore, the role of wood is to upgrade the cargo hold, but it is meaningful to use it together with bolts and adhesive tape.

2. First of all, there should be pickaxes. Pickaxes should be made of ore ingots and wood (except for some special ones, drill bits are not needed). Each character has a pickaxe, the weakest one. Of course, you can dig good ore to make a better pickaxe. Mines are divided into several grades according to their value. First, copper, iron, silver and gold (tin, lead, tungsten and platinum), then meteorite, then magic gold (bloody ore), then Yuyan (made of Yuyan ore {which can be g in hell} and obsidian (water and magma), and hell furnace, which can be found in hell), and then Xinsan ore (the first grade ore needs to be mined first grade, and the first grade ore needs to be synthesized into ingot for drilling the second grade ore), After the second grade mine is collected, the new anvil can be used as the next tool. After the second grade mining tool is finished, the third grade mine can be g. After digging, the new furnace can be combined with the original furnace to synthesize the next ingot.) then the sacred ingot dropped by the new three kings, the synthetic drill, goes to the underground jungle to mine the green ingot, Ye lvding can synthesize ghost ingot with Xinghun (after fleshy mountain {I don't know if it's the flower of the century, forget} ngeon monster). Ye lvding can synthesize mushroom ingot with luminous mushroom (you need special tools, you can buy it from mushroom man). After that, ye lvding can synthesize tools of four classes with things that fall from four pillars (in fact, they are all the same, It's just that the shape is different. Mining can be combined with mining potion (it is called this bar) mining, so that you know where the mineral deposits are. There are three levels of furnaces. The first level is the stone furnace, then the hell furnace, and then the one from the new three mines. I don't know the details.

3. Code error name / description
error of insufficient temperature rise of e000 developer when it is powered on
error of abnormal high temperature of E001 developer
error of insufficient temperature rise of E002 developer
error of abnormal temperature drop of E003 developer when it is in standby
error of protection circuit of e004 developer
error of tension of E005 mesh
error of E006 developer Error in connection of developing unit
error in belt offset of E007
error in service life of E008 fixing unit
error in power supply of E009
error in drum / ITB motor of E012
error in ink jam of e013
error in fixing motor / belt drive motor of E014
error in HP detection of E015 temper
error in ATR of e020
error in rotation of E021 developing unit < B R / > error of E023 developing motor
error of E025 supply system
error of E051 horizontal alignment motor
error of e060 detecting main wire HP
error of E061 potential control
error of E070 detecting ITB HP sensor
error of E073 connecting with transfer drawer
error of e077 secondary transfer roller
error of e078 ITB cleaner
E100 BD detection failure error
E102 laser EEPROM error
E110 scanner motor error
e193 gate array error
e196 color sensor EEPROM error
E197 extended serial communication error
E198 color sensor error
E202 HP error
e225 lamp fuse fusing error
e227 power supply (24 V) error
E240 printing error Error of communication cable
error of E248 EEPROM
error of e315 extraction
error of E351 main controller PCB (sub)
error of e503 pager internal communication (pager / saddle pager)
error of E505 pager backup storage (pager / saddle pager)
error of e514 tail edge auxiliary motor (pager / saddle pager)
e519 Error of gear change motor (sorter / saddle sorter)
error of e530 front queue (sorter / saddle sorter)
error of E531 sorting binding (sorter / saddle sorter)
error of E532 stapler moving (sorter / saddle sorter)
error of e535 stapler swinging (sorter / saddle sorter)
error of e537 rear queue (sorter)/ Error of E540 upper tray moving up / down (pager / saddle pager)
error of e542 lower tray moving up / down (pager / saddle pager)
error of e584 shutter device (pager / saddle pager)
error of e590 punching motor (punching device)
error of e591 punching st sensor (punching device) Error of e592 punching horizontal alignment sensor (punching device)
error of e593 punching lifting motor (punching device)
error of e5f0 saddle paper positioning (saddle sorter)
error of e5f1 saddle paper folding (saddle sorter)
error of e5f2 saddle Guide (saddle sorter)
Chapter 14 canon (China) Technology Co., Ltd Bis of operation Department_ TS division issues
14-2
14.2 detailed error code
14.2.1 error code list
0012-0886
e5f3 saddle queue (saddle pager) error
e5f4 saddle rear binding (saddle pager) error
e5f5 saddle front binding (saddle pager) error
e5f6 saddle docking (saddle pager) error
e5f8 saddle connector (saddle pager) Error of e5f9 saddle switch (saddle pager)
error of E602 hard disk
error of e604 image insufficient storage (SDRAM)
error of e610 HDD encryption key
error of e677 external controller
error of e711 IPC communication
error of E730 PDL
error of e731 translation PCB
error of e732 reader communication
error of e733 communication Error of printer communication
error of E740 Ethernet board
error of e744 language file / bootrom
error of e747 image processing ASIC or storage control / communication control
error of e748 Cl2 board dependency or board
error of e749 restart command after changing PDL configuration
error of e800 fixing / paper feeding protrusion detection
error of e804 fan
error of e805 fixing row Error of fan stop detection or fan error
error of E820 transfer unit cleaning cooling fan
error of e824 main charging air pump / exhaust fan
error of e842 external heating roller unlocking
error of external heating roller locking
error of fixing belt locking
error of locking
error of air auxiliary fan of e905 paper bin
error of e906 Paper bin heater error__

4. Huawei's ma5683t optical access equipment is an OLT equipment in GPON / EPON system. Its functions and functions are similar to those of ma5680t. It belongs to Huawei's OLT equipment with medium and small capacity. The detailed parameters are as follows: 13 slots are provided, including 6 service board slots; 2 main control board slots; Two giu up board slots; 2 power supply board slots; 1 general interface board slot. Slots 0-5 of Huawei ma5683t are configured with service boards, and slots 6-7 are configured as main control board slots. It can be equipped with two main control boards to realize the main and standby functions, 8 and 9 slots are equipped with giu uplink board, 10 and 11 slots are equipped with power board, and 12 slots are equipped with general interface board. Ont (optical network terminal) is a proct of the xpon network access scheme. Generally speaking, ont is ONU, which is a kind of optical network terminal used for client. Strictly speaking, ont should be a part of ONU. The difference between ont and ONU is that ont is an optical network terminal directly located at the user end, while ONU is an optical network unit, and there may be other networks, such as Ethernet, between it and the user.

5. Code error name / description
error of insufficient temperature rise of e000 developer when it is powered on
error of abnormal high temperature of E001 developer
error of insufficient temperature rise of E002 developer
error of abnormal temperature drop of E003 developer when it is in standby
error of protection circuit of e004 developer
error of tension of E005 net
error of E006 developer Error of component connection
error of E007 belt offset
error of E008 fixing assembly life
error of E009 power related
error of E012 drum / ITB motor
error of e013 waste ink blocking
error of E014 fixing motor / belt drive motor
error of HP detection of E015 temper
error of e020 ATR
error of E021 developing assembly rotation
error of E023 developing assembly Error of machine
error of E025 supply system
error of E051 horizontal alignment motor
error of e060 detecting main wire HP
error of E061 potential control
error of E070 detecting ITB HP sensor
error of E073 connecting with transfer drawer
error of e077 secondary transfer roller
error of e078 ITB cleaner
error of E100 BD detection failure
error of E070 Error of E102 laser EEPROM
error of E110 scanner motor
error of e193 gate array
error of e196 color sensor EEPROM
error of E197 extended serial communication
error of E198 color sensor
error of E202 HP
error of e225 lamp fuse fusing
error of e227 power supply (24 V)
error of E240 printer communication cable
error of E248 EEPROM Error
error of e315 extraction
error of E351 main controller PCB (sub)
error of e503 pager internal communication (pager / saddle pager)
error of E505 pager backup storage (pager / saddle pager)
error of e514 tail edge auxiliary motor (pager / saddle pager)
error of e519 gear change motor (pager / saddle pager)
E5 30 error of front queue (pager / saddle pager)
error of E531 sort binding (pager / saddle pager)
error of E532 stapler moving (pager / saddle pager)
error of e535 stapler swinging (pager / saddle pager)
error of e537 rear queue (pager / saddle pager)
error of E540 upper tray moving up / down (pager / saddle pager)
error of e537 Error of e542 lower tray moving up / down (pager / saddle pager)
error of e584 shutter device (pager / saddle pager)
error of e590 punch motor (punch device)
error of e591 punch st sensor (punch device)
error of e592 punch horizontal alignment sensor (punch device)
error of e593 punch lifting motor Error of punching device
error of e5f0 saddle paper positioning (saddle sorter)
error of e5f1 saddle paper folding (saddle sorter)
error of e5f2 saddle Guide (saddle sorter)
Chapter 14 bis of technical department of Canon (China) Co., Ltd_ TS division issues
14-2
14.2 detailed error code
14.2.1 error code list
0012-0886
e5f3 saddle queue (saddle pager) error
e5f4 saddle rear binding (saddle pager) error
e5f5 saddle front binding (saddle pager) error
e5f6 saddle docking (saddle pager) error
e5f8 saddle connector (saddle pager) error
error of e5f9 saddle switch (saddle pager)
error of E602 hard disk
error of e604 image insufficient storage (SDRAM)
error of e610 HDD encryption key
error of e677 external controller
error of e711 IPC communication
error of E730 PDL
error of e731 translating PCB
error of e732 reader communication
error of e733 printer communication
error of E740 Error of too board
error of e744 language file / bootrom
error of e747 image processing ASIC or storage control / communication control
error of e748 Cl2 board dependency or board
error of e749 restart command after changing PDL configuration
error of e800 fixing / feeding protrusion detection
error of e804 fan
error of e805 fixing exhaust fan stop detection stop or fan error detection Error
E820 transfer unit cleaning cooling fan error
e824 main charging air pump / exhaust fan error
e842 external heating roller unlocking error
external heating roller locking error
fixing belt locking error
locking error
e905 paper bin air auxiliary fan error
e906 paper bin heater error__

6. 1 Wangfujing: it's expensive and not very delicious. But shopping malls have the style of
. It has the title of the first street in China. Overall comparison, like a facade
2. Ghost street, it's absolutely fun. You can eat everything one day and one night< br />3 Xidan. As a friend said, many small things are not expensive
4. Dongdan. Cheap
5. Chang'an Street. There is a very different feeling< br />6 Sanlitun. Bar street
want to buy gadgets, not too expensive ~ it's more popular
Xidan bar is more concentrated, there are many shopping malls, such as Zhongyou Juntai, etc.
there are many accessories on the fourth floor of Huawei, such as Huawei pearl, etc.
the price is very expensive, in fact, it's very cheap, you can bargain, otherwise they want a sky high price, mainly depends on what you buy.
upstairs is clothes, Besides, Beijing's strategy is similar to Warwick's, but things are cheaper

7. Adding a 4G stripe or changing to a mid-range graphics card generally does not exceed your power load range

8. Samsung ua55ju6800 TV has built-in WiFi
built in Wi Fi: (Wi Fi) IEEE
802.11b wireless network specification is a variant of IEEE
802.11 network specification. The maximum bandwidth is 11
Mbps. In the case of weak signal or interference, the bandwidth can be adjusted to 5.5mbps, 2Mbps and 1Mbps. The automatic adjustment of bandwidth effectively ensures the stability and reliability of the network. Its main characteristics are: high speed, high reliability, in the open area, the communication distance can reach 305 meters, in the closed area, the communication distance is 76 meters to 122 meters, convenient to integrate with the existing wired Ethernet network, the networking cost is lower
WiFi TV: the TV has the function of wireless WiFi, which can automatically search the IP address of the device (computer, mobile phone, etc.), realize the wireless sharing function of wireless search, wireless transmission, online movies, pictures, music, novels, etc., and greatly increase the interaction between users and TV
advantages: the TV has a built-in wireless network card mole chip, which can receive the wireless WiFi signal transmitted by the wireless router. The advantage is that the wireless connection is not required, and the cable connection is convenient
General IPTV has two built-in network cards, one is cable network card; One is wireless network card. The wired network card is the wired connection bandwidth to access the Internet; The wireless network card is used to connect the wireless router to realize wfii connection to the Internet.