Ethereum query server

1.

If you want to query the transaction records on the main network, you can use Etherscan. However, if you build your own private chain, how should you query the transaction records

the answer is that you need to listen to the logs on the chain, save them in the database, and then query them in the database. For example:

< pre t = "code" L = "Java" > varaddr = & quot& quot;< br />varfilter=web3.eth.filter({fromB lock:0 ,toBlock:' latest', address:addr });< br />filter.get(function(err,transactions){
transactions.forEach(function(tx){
vartxInfo=web3.eth.getTransaction(tx.transactionHash);
/ / at this time, the transaction information txinfo can be stored in the database
})< br />});

Web3. Eth. Filter() is used to monitor the log on the chain, and Web3. Eth. Gettransaction() is used to extract the information of the specified transaction. Once the transaction information is obtained, it can be stored in the database for query

recommend a practical introction, you can see: Ethereum tutorial

2. Just focus:
you can't retrieve your assets through Ethereum block query
think too much
if you want to check the real estate,

you can go to the real estate transaction registration center.

3. Ethereum browser's website is etherscan.io, you can query Ethereum related details. At present, the exchanges that can trade Ethereum mainly include: coin an, fire coin, bitnet, etc.

4. Yes, but it is better to use overseas servers. In addition, the server configuration should be medium or above.

5. Oh, you're a router. Just forward packets from 106.14.47.114:6667 to 10.27.147.94:6667
to set the firewall to pass through,

6. The withdrawal of digital currency generally only occurs on the digital currency trading platform. Where to withdraw cash? It is suggested to check the account number of the accounting platform carefully. It is generally in the personal center. The specific situation still needs to consult the official personnel, and the answer given by the official shall prevail. However, when choosing a digital currency trading platform, it is better to choose a big platform such as Xigu digital asset trading platform and bitcoin China.

7. For example, if you want to transfer eth, the address of Ethereum on the imtoken, click Ethereum to withdraw the currency on lbank, and then enter the address. Other currencies are the same as above
thank you

8. 如何快速辨别网卡ID与物理网卡的对应关系
一般购买的服务器都有4个网卡，这个时候在安装好服务器后，配置IP的时候就郁闷了
如是一个浪潮8560M2服务器安装Redhat后的网卡显示：
[root@DBSERVER51 ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:E0:ED:2D:0F:58
inet addr:192.168.4.10 Bcast:192.168.4.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:40428 errors:0 dropped:0 overruns:0 frame:0
TX packets:392 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3413500 (3.2 MiB) TX bytes:44521 (43.4 KiB)
Memory:faee0000-faf00000

eth1 Link encap:Ethernet HWaddr 00:E0:ED:2D:0F:59
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Memory:fae60000-fae80000

eth2 Link encap:Ethernet HWaddr 00:25:90:5A:15:B6
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Memory:fafe0000-fb000000

eth3 Link encap:Ethernet HWaddr 00:25:90:5A:15:B7
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Memory:faf60000-faf80000

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:660 (660.0 b) TX bytes:660 (660.0 b)
从一个机房搬下来时，忘记标记了这个时候还是想修改eth0作为通信口但是一个一个插拔比较麻烦，于是就想能不能有个好办法，毕竟Linux不像Windows那样直观，打开网络连接就可以看到这个时候就要用到ethtool这样一个命令，命令详解如下：
命令描述：
ethtool 是用于查询及设置网卡参数的命令
ethX是以太网卡的名称，Linux系统将检测到的第一块以太网卡命名为eth0, 第二块为eth1,…….
使用概要：
ethtool ethx //查询ethx网口基本设置，其中 x 是对应网卡的编号，如eth0、eth1等等
ethtool –h //显示ethtool的命令帮助(help)
ethtool –i ethX //查询ethX网口的相关信息
ethtool –d ethX //查询ethX网口注册性信息
ethtool –r ethX //重置ethX网口到自适应模式
ethtool –S ethX //查询ethX网口收发包统计
ethtool –s ethX [speed 10|100|1000] [plex half|full] [autoneg on|off] //设置网口速率10/100/1000M、设置网口半/全双工、设置网口是否自协商
ethtool [ -a | -c | -g | -i | -d | -k | -r | -S |] ethX
ethtool [-A] ethX [autoneg on|off] [rx on|off] [tx on|off]
ethtool [-C] ethX [adaptive-rx on|off] [adaptive-tx on|off] [rx-usecs N] [rx-frames N] [rx-usecs-irq N] [rx-frames-irq N] [tx-usecs N] [tx-frames N] [tx-usecs-irq N] [tx-frames-irq N] [stats-block-usecs N][pkt-rate-low N][rx-usecs-low N] [rx-frames-low N] [tx-usecs-low N] [tx-frames-lowN] [pkt-rate-high N] [rx-usecs-high N] [rx-frames-high N] [tx-usecs-high N] [tx-frames-high N] [sample-interval N]
ethtool [-G] ethX [rx N] [rx-mini N] [rx-jumbo N] [tx N]
ethtool [-e] ethX [raw on|off] [offset N] [length N]
ethtool [-E] ethX [magic N] [offset N] [value N]
ethtool [-K] ethX [rx on|off] [tx on|off] [sg on|off] [tso on|off]
ethtool [-p] ethX [N]
ethtool [-t] ethX [offline|online]
ethtool [-s] ethX [speed 10|100|1000] [plex half|full] [autoneg on|off] [port tp|aui|bnc|mii] [phyad N] [xcvr internal|external]
[wol p|u|m|b|a|g|s|d...] [sopass xx:yy:zz:aa:bb:cc] [msglvl N]
标志
-a 查看网卡中 接收模块RX、发送模块TX和Autonegotiate模块的状态：启动on 或 停用off
-A 修改网卡中 接收模块RX、发送模块TX和Autonegotiate模块的状态：启动on 或 停用off
-c display the Coalesce information of the specified ethernet card
-C Change the Coalesce setting of the specified ethernet card
-g Display the rx/tx ring parameter information of the specified ethernet card
-G change the rx/tx ring setting of the specified ethernet card
-i 显示网卡驱动的信息，如驱动的名称、版本等
-d 显示register mp信息, 部分网卡驱动不支持该选项
-e 显示EEPROM mp信息，部分网卡驱动不支持该选项
-E 修改网卡EEPROM byte
-k 显示网卡Offload参数的状态：on 或 off，包括rx-checksumming、tx-checksumming等
-K 修改网卡Offload参数的状态
-p 用于区别不同ethX对应网卡的物理位置，常用的方法是使网卡port上的led不断的闪N指示了网卡闪的持续时间，以秒为单位
-r 如果auto-negotiation模块的状态为on，则restarts auto-negotiation
-S 显示NIC- and driver-specific 的统计参数，如网卡接收/发送的字节数、接收/发送的广播包个数等
-t 让网卡执行自我检测，有两种模式：offline or online
-s 修改网卡的部分配置，包括网卡速度、单工/全双工模式、mac地址等

9. Ethtool - P eth0
after enter, the indicator light next to the network interface corresponding to eth0 will flash, so that you can quickly determine the location of eth0 network interface (press Ctrl + C to stop flashing)
also determine eth1 and eth2...