R9290 Ethereum
Publish: 2021-04-26 11:37:12
1. Public version of the graphics card this temperature is normal, strongly do not recommend to buy public version, nothing you buy public version why heat garbage a force
2. More luxurious graphics card, but R9 series of graphics cards are more cost-effective. There's absolutely no problem playing games. You can win almost 99% of the games. The power consumption of a card is relatively large, which costs a lot of power. R9 Series graphics card you have to be equipped with a power supply of about 600W. Otherwise, we will be stretched.
3. Hehe,
R9
290 is a 300W level graphics card. Whether 500W power supply is enough depends on your other accessories. If the standard
R3
1200cpu ordinary home host, then 500W power supply is enough
it's estimated that it's not a mine card. The miners have to answer the questions like rx580. R9
290 is not enough to pay for electricity.
R9
290 is a 300W level graphics card. Whether 500W power supply is enough depends on your other accessories. If the standard
R3
1200cpu ordinary home host, then 500W power supply is enough
it's estimated that it's not a mine card. The miners have to answer the questions like rx580. R9
290 is not enough to pay for electricity.
4. Personally, it is not recommended. The power consumption of r9290 is high. The mine card itself is a graphics card, working full load for a long time. There is no guarantee of the quality of the eliminated procts. It's easy to have problems.
5. Don't dig, it's too late...... The exchange of fire will be increased by 30-50%, which is not enough for the electricity and machine loss costs. Save it for the game
6. The R9 290 graphics card has 2560 stream processors, and the R9 290x has 2816 stream processors. The performance difference between them is about 10%.
7. Look at how long you have used it, and do you still have warranty cards and other computer stores to recycle it or sell it in Taobao second-hand mall? If it's relatively new, it's about 1000
8. The technical performance of multi graphics card is difficult to say, because the performance of crossfire is determined by the motherboard design. Many motherboards can be compatible with crossfire and SLI mode, but only a small number of advanced motherboards can fully reflect this kind of performance, such as advanced ASUS player's national motherboard, micro star's power series, etc. the motherboards supporting crossfire must have physical switching chips, In order to improve the performance of crossfire or SLI, if the above conditions are met, the effect of 1 + 1 greater than 2 can be achieved
many graphics cards use al chips. For example, the 9800gx2 developed by NV in the early days was the flagship proct of that year. One graphics card integrated two 9800gt, but it only occupied one PCI-E slot. Its performance was too powerful for all to see. Later ATI also launched al chip procts. Now, R9 295x2 is the embodiment of this configuration
but why do people have to fight or SLI with this kind of al chip graphics card? The main reason is to break through the limitation of PCI-E interface. For example, the most advanced Titan graphics card is the top proct of NV, with powerful performance and high price. However, the market is not very good. It is because at this price, gtx980 is used to form SLI al graphics card, Titan can be defeated. In fact, it's not Titan, but the PCI-E interface of the motherboard only has the speed of 16x. No matter how powerful the graphics card is, this interface has already controlled its performance. If it's a al card crossfire or SLI, the minimum is 16x + 8x, which is much higher than that of a single card. At the same time, no matter how powerful the graphics card is, the interface has controlled its performance, Will effectively rece the temperature of GPU in high load operation, but the increase of power after al card exchange or SLI is very large, and the demand for motherboard is extremely high, so it limits its market
at present, many networks say that optimization is not good, and they don't understand the operation mode of the graphics card for the support of multiple graphics cards. At the same time, the motherboard tested is not suitable for multiple graphics cards, which leads to a lot of false statements. The premise of using multi graphics card is advanced motherboard, high-performance power supply, large capacity multi-channel memory, high-speed hard disk, etc.
many graphics cards use al chips. For example, the 9800gx2 developed by NV in the early days was the flagship proct of that year. One graphics card integrated two 9800gt, but it only occupied one PCI-E slot. Its performance was too powerful for all to see. Later ATI also launched al chip procts. Now, R9 295x2 is the embodiment of this configuration
but why do people have to fight or SLI with this kind of al chip graphics card? The main reason is to break through the limitation of PCI-E interface. For example, the most advanced Titan graphics card is the top proct of NV, with powerful performance and high price. However, the market is not very good. It is because at this price, gtx980 is used to form SLI al graphics card, Titan can be defeated. In fact, it's not Titan, but the PCI-E interface of the motherboard only has the speed of 16x. No matter how powerful the graphics card is, this interface has already controlled its performance. If it's a al card crossfire or SLI, the minimum is 16x + 8x, which is much higher than that of a single card. At the same time, no matter how powerful the graphics card is, the interface has controlled its performance, Will effectively rece the temperature of GPU in high load operation, but the increase of power after al card exchange or SLI is very large, and the demand for motherboard is extremely high, so it limits its market
at present, many networks say that optimization is not good, and they don't understand the operation mode of the graphics card for the support of multiple graphics cards. At the same time, the motherboard tested is not suitable for multiple graphics cards, which leads to a lot of false statements. The premise of using multi graphics card is advanced motherboard, high-performance power supply, large capacity multi-channel memory, high-speed hard disk, etc.
9. It's not your fault.. This temperature is also the only public version of the graphics card
the temperature of the public version of the N card will also be high, but there will be no public version of the N card. They are all self-made heat dissipation, so the heat dissipation will be much better, and very few public version models will be sold out
many of R9 290 are public version cards, which are cheap. The simplest way is to transform the heat dissipation by yourself
the performance of gtx760 and R9 290 are not the same level ide. You should not be better than R9 290. No matter how bad it is, you have to compare with gtx780. The public version of gtx780 TPD is also very high. It's also a virtue for you to buy a public version in the summer
if you want to use the network to replace the graphics card radiator or the R9 290 hole, you can find a luxury radiator or a second-hand one, and change it yourself. The temperature performance is much better
the non-public version of Yingtong R9 290 game master is good, with five heat pipes and three-year warranty. The price is not expensive. When you bought this one,
it didn't mean nothing. ASUS paladin is a scum, pure low-end proct. You are deceived by ASUS faith. I took a picture below, which seems to be three heat pipes
the TDP of R9 290 is very high, and the matching radiator is better than the N card with the same performance. For example, the Yingtong R9 290 game master I talked about is three straight heat pipes + two U-tubes. When playing the game, it can be stable at 70 degrees with medium noise.
the temperature of the public version of the N card will also be high, but there will be no public version of the N card. They are all self-made heat dissipation, so the heat dissipation will be much better, and very few public version models will be sold out
many of R9 290 are public version cards, which are cheap. The simplest way is to transform the heat dissipation by yourself
the performance of gtx760 and R9 290 are not the same level ide. You should not be better than R9 290. No matter how bad it is, you have to compare with gtx780. The public version of gtx780 TPD is also very high. It's also a virtue for you to buy a public version in the summer
if you want to use the network to replace the graphics card radiator or the R9 290 hole, you can find a luxury radiator or a second-hand one, and change it yourself. The temperature performance is much better
the non-public version of Yingtong R9 290 game master is good, with five heat pipes and three-year warranty. The price is not expensive. When you bought this one,
it didn't mean nothing. ASUS paladin is a scum, pure low-end proct. You are deceived by ASUS faith. I took a picture below, which seems to be three heat pipes
the TDP of R9 290 is very high, and the matching radiator is better than the N card with the same performance. For example, the Yingtong R9 290 game master I talked about is three straight heat pipes + two U-tubes. When playing the game, it can be stable at 70 degrees with medium noise.
10. 1、 Distinguish between brand and Shanzhai, and clearly distinguish which brand procts are
nowadays, there are so many graphics card brands that you can't count 10 well-known brands. Generally speaking, the most direct way to get this information is to look at the brand ranking of the media first< Second, pay attention to the type of heat sink used by the graphics card
the type of heat sink here is not to say whether or how many heat pipes there are, but to ask the user to pay attention to the type of cooling fan. Generally, high-performance graphics cards can only use the forced cooling fan, and the life of the fan determines the life of the whole radiator, The graphics card will be overheated or even burned
especially after the second-hand graphics card has been used for a period of time, if the type of cooling fan is not right and the speed drops, the core operating temperature will rise, which may affect the future stability and service life of the whole graphics card
Third, distinguish the pros and cons
attention should be paid to the workmanship of the graphics card, the use of components and wiring. If all these meet the requirements, then at least the proct is not a miscellaneous brand, and the confidence in it is also enhanced. Whether the solder joint of the graphics card is smooth or not is also an important basis to judge the second-hand graphics card, because the poor welding quality of the graphics card generally has a short life and a relatively high probability of damage< Fourth, pay attention to the model and speed
in the past, the price of video memory is very expensive, so many video cards do not directly load the maximum capacity that the chip can address, but take the way of reserving the video memory slot, which not only saves the cost and improves the competitiveness of procts, but also provides conditions for future upgrades. Of course, this phenomenon is generally limited to PCI graphics card, and after the AGP era, the video memory is directly welded on the graphics card, and does not provide any expansion slot< 5. Compatibility problems
many graphics cards can't give full play to the maximum performance when working with specific chipsets, and even blue screen machines frequently appear.
nowadays, there are so many graphics card brands that you can't count 10 well-known brands. Generally speaking, the most direct way to get this information is to look at the brand ranking of the media first< Second, pay attention to the type of heat sink used by the graphics card
the type of heat sink here is not to say whether or how many heat pipes there are, but to ask the user to pay attention to the type of cooling fan. Generally, high-performance graphics cards can only use the forced cooling fan, and the life of the fan determines the life of the whole radiator, The graphics card will be overheated or even burned
especially after the second-hand graphics card has been used for a period of time, if the type of cooling fan is not right and the speed drops, the core operating temperature will rise, which may affect the future stability and service life of the whole graphics card
Third, distinguish the pros and cons
attention should be paid to the workmanship of the graphics card, the use of components and wiring. If all these meet the requirements, then at least the proct is not a miscellaneous brand, and the confidence in it is also enhanced. Whether the solder joint of the graphics card is smooth or not is also an important basis to judge the second-hand graphics card, because the poor welding quality of the graphics card generally has a short life and a relatively high probability of damage< Fourth, pay attention to the model and speed
in the past, the price of video memory is very expensive, so many video cards do not directly load the maximum capacity that the chip can address, but take the way of reserving the video memory slot, which not only saves the cost and improves the competitiveness of procts, but also provides conditions for future upgrades. Of course, this phenomenon is generally limited to PCI graphics card, and after the AGP era, the video memory is directly welded on the graphics card, and does not provide any expansion slot< 5. Compatibility problems
many graphics cards can't give full play to the maximum performance when working with specific chipsets, and even blue screen machines frequently appear.
Hot content