Course of mechanical loading system

1. It is recommended to use 360 driver master software to install driver. It can intelligently detect hardware and match the most suitable driver for installation

2. The CD-ROM is the most suitable driver for this computer. The steps to update the driver are: start → control panel → system → hardware → device manager → click Scan to detect hardware changes on the top of the toolbar. If there is a yellow warning sign in the driver bar, it means that the driver is not installed correctly. At this time, the driver needs to be updated. At this time, you need to right-click the wrong driver → update driver → insert the drive disc to update automatically.

3.

You can use ghost installation device in USB flash disk PE to install the system

1. Double click to open the one click ghost recovery tool, select "restore partition", select win7.gho file as the image path, select the location of the system to be restored, such as disk C, or select the installation location according to the disk capacity, and click OK

2. Pop up the dialog box, click Yes, restart the computer immediately to restore,

3. Start to enter this interface, execute the operation of installing win7 system to Disk C, and wait patiently for the progress bar to complete

After the operation, the computer will restart automatically and continue the installation and configuration of win7 system

4. Installation method of USB flash disk:
the operator installs win7 system with USB flash disk_ Network experience
http://jingyan..com/article/fdbd4277dcd9f3b89f3f4858.html
hard disk installation method:
the operator will teach you how to restore the installation system with one click_ Network experience
http://jingyan..com/article/363872ec2b270a6e4ba16fc3.html

5. To install the system, you should first set up boot from CD in BIOS. Generally, you can enter BIOS by pressing F10 or Ctrl + Del. There may be different ways depending on the motherboard<

after setting, put the installation CD into the CD-ROM drive and restart it.
the installation takes about 40 minutes. After installation, you need to install other software yourself. There is also gohst installation, which is the ISO file of the system made by others, and it is equivalent to system restoration for the installation. There are basically common software in it, Generally, few people install their own software

you can download the system on the Internet and install it on your own..

6. Computer system installation steps:
1. Use the [u depth U disk startup disk making tool] to make the U startup disk, restart the computer, wait for the startup screen to appear, press the startup shortcut key, select U disk startup to enter the U depth main menu, and select the option of [02] win8pe installation and maintenance Version (new machine)
2. Enter the win8pe system, and the installation tool will pop up, Click "Browse" to select and save the win system image file in U disk
3. Wait for the installation tool to automatically load the win system image package installation file, just select the installation disk location, and then click "OK"
4. Click "OK" directly in the pop-up prompt window
5. Please wait for a few minutes before the installation tool starts to work
6. After completion, a prompt to restart the computer will pop up. Click "Yes (y)" button
7. At this time, you can unplug the U disk, restart the system and start the installation. We don't need to operate, just wait for the installation to complete, and finally restart it before entering the system desktop

7. 1、 Prepare to install
1. Prepare the system disk and drive disk
2. Save the data that you think is useful in the C disk of the system to other partition disks
3. Send the driver to disk D for standby
4. Scan the disk - my computer - right click the disk drive to install the system (c) - properties - tools - start checking - start checking - confirm to exit after checking< Second, the CD-ROM drive starts
1. Award Bion 4.51pg setting
Restart, press del to enter the BIOS award 4.51pg interface, select the second line of "BIOS features setup" with the direction key of the function keyboard, enter to enter the BIOS features setup interface, find the seventh line of "boot sequence", use PgUp or PgDn to turn the page, and change the A, C displayed on the right side to CDROM, C, a. Press ESC, press F10, and then press y to save and exit
or
award BIOS 6.0 setting
Restart, press del to enter BIOS 6.0 setting interface, find advanced BIOS features (Advanced BIOS parameter setting), press enter to enter advanced BIOS features interface, select first boot device with keyboard direction keyboard, turn page with PgUp or PgDn to change hdd-o to CDROM, press ESC, press F10, and then press y to save to exit
2. Insert the XP installation CD into the CD-ROM drive and restart. When you see the word CD... At the bottom of the screen, press any key in time, otherwise the computer will skip the CD-ROM and start from the hard disk. After the XP system disk is started, you can start to install programs, files, load hardware drivers, and enter the Chinese interface of the installation wizard
3. Pre installation
1
2. Check the starting environment - enter
3. For agreement, press F8
4. Specify the partition to install to, and C -- enter
5. Specify to use the file system and format the disk partition with XXX - enter
6. Format the installation program, create a list, and the files to the win installation folder
7. Start to initialize XP related files and configurations, save initialization parameters, and restart
4. Installation wizard
1. Region and language options - next step
2. Name, company name - next step
3. Proct key - next step
4. Computer name, administrator password, next step
5. Date and time setting - next step
6. Install the protein complex, select typical - next step
7. Working group and computer domain - down time
8. Copy the file, start the installation, register the components, save the settings, delete the temporary files and restart< 5. Finish the installation (you can skip this step and install later)
1. Automatically adjust the resolution
2. Enable automatic update - next step
3. Connect to it - next step
4. Activate win - next step
5. Who uses this computer - restart< 6. Set up the computer
1. After restart, you will enter the XP desktop. At this time, the desktop only has the recycle bin shortcut icon and taskbar. Right click on the desktop and select "properties" -- "desktop" -- "custom desktop" -- check "my computer", "network neighborhood" and so on -- "OK" to return to the desktop
2. If the test run is normal, such as silent or abnormal display, right-click "my computer", select "properties" - "hardware" - "device manager" -- the yellow question mark or exclamation mark in front represents the unrecognized or uninstalled hardware. Right click to select "re install driver", put in the corresponding drive CD, and select "auto install", The system will automatically identify the corresponding driver and install it
use the above method until the "question mark" disappears. The drivers that need to be installed generally include graphics card, sound card, network card, cat and so on.

8. 1. On the windows system computer which has no virus and can access the Internet, make the system and install the USB flash disk. The steps are as follows:

1.1 download the registered or cracked version of UltraISO software

1.2 download the original Microsoft Windows system installation image file (the file is in ISO format, and you can get ed2k download link from "MSDN, I'll tell you" website)

1.3 plug in the USB flash disk (capacity requirement: generally, Win XP needs more than 1G; Win7, win8. X and win10 need to be based on the size of the system image file, and generally need to be larger than 4G or 6g)

1.4 in the disk manager, set the primary partition of the USB flash disk (if it does not need to be created first) as the active partition

1.5 start the floppy disk, and write the system installation image file (ISO format) to the U disk in the way of "write to hard disk image" (FAT32 is selected for the U disk file system)

2 on the computer that needs to install the system:

2.1 plug in the bootable system installation U disk

2.2 after power on, there are two operation methods to choose:

one is to enter the UEFI / BIOS setting interface of the motherboard, set the USB flash disk as the first boot device, and then save and restart (all motherboards are OK, and the older motherboards can only use this method)

the second is to select boot from U disk in the boot menu of the motherboard (for most motherboards that are not very old)

note: the keys (or combination keys) to enter the UEFI / BIOS setting interface of the motherboard or boot device selection menu are different for each motherboard. You need to carefully read the prompts on the screen or refer to the motherboard manual to confirm

2.3 start to install the system, format the partition to install the system when selecting the installation location, and then continue to install according to the prompts.

9.

The method of reloading the operating system is as follows (take win 7 as an example, other similar):

1, insert the system disk (system CD, system USB) into the computer

* Please use the original installation disk for installation. The installation system does not need any third-party software< br />