What's the maximum tonnage of ore washer

1. Dig three or more pits on the side of the ore washing machine. The posture is arbitrary. As long as the three or more pits are connected together, the injected water will become infinite water. Then put the instrial pump next to the ore washing machine and power on. OK, the instrial pump will pump the water from the pit just g into the ore washing machine!

2.

In the instrial "beating and washing process"

1. pulverizing, one ore is put into the pulverizer, which consumes EU and time, and turns into two crushed ores, increasing proction by two times as much as the original one, Some small pieces of powder (9 small pieces of powder, a powder, a furnace to burn powder into an ingot), and a stone powder (which can be used as building foam)

2. centrifugation, and put 1 pure crushed ores into the heat centrifuge (must give the centrifuge red stone signal, or it will consume a lot of time). It still consumes EU and time, and becomes a powder, a handful of powder (except uranium mine). It will become uranium 238 and 235)

3. @ ztw0_ 0
   

3.

1、 Steps:

1, the use of the pump needs to dig a pool out first, and put water on it

4. Ore washing machine: further increase mineral proction (increase by 44.4%), obtain stone powder and Xiaocuo sulfur powder
centrifuge: centrifuge copper powder to get small piles of gold powder and nickel powder; The ruby powder and mercury unit were obtained by centrifuging the ruby; Helium unit and rutile were obtained by centrifuging fluorite, nickel and copper were obtained by centrifuging gold powder
the difference between the two:
1. The latter consumes more electric ore washing machine. In short, it uses water to clean the crushed ore to proce pure powder (Elemental) and impurities (also elemental minerals)
2. The former needs water to proce pure ore powder and impurities
my world instry is an open game, which can use very simple materials to make many strange modern works, such as using the most natural rubber to make batteries and other instries.

5.

1、 Sorting

sorting is a mineral processing method to separate useful minerals and gangue minerals by using the physical properties of ore, such as surface characteristics, optical properties, electrical properties, magnetic properties, radioactivity and the absorption and reflection ability of ore to rays. Sorting is mainly used for the separation of massive and granular materials, such as removing large waste rock or picking out large rich ore. The upper limit of separation particle size is 250-300 mm, and the lower limit is 10 mm. For some precious minerals (such as diamond), the lower limit is 0.5-1 mm. For the separation of non-metallic minerals, sorting can be used to preconcentrate or obtain final procts. It has the following advantages: it can partly replace the selective mining method with low efficiency and high cost; Large pieces of waste rock are removed in advance to save the transportation, crushing, grinding and mineral processing costs of waste rock; Improve the grade of ore and the content of useful minerals; The waste rock can be used for backfilling and building materials to rece its environmental pollution

sorting can be divided into three ways: flow sorting (continuous sorting), partial sorting (heap sorting) and block sorting. Flow separation is to make a certain thickness of material layer continuously pass through the detection area; Partial separation and block separation means that one ore or one ore passes through the detection area alone. The quality of block selection or partial selection is better. At present, block selection is the main method in instry. There are two types of block picking: manual picking and mechanical picking

Manual sorting

according to the appearance characteristics (color, luster, shape, etc.) between ore and waste rock, ore or waste rock can be sorted out by hand, and can be divided into forehand sorting (picking useful minerals from ore) and backhand sorting (picking waste rock from ore). It is mainly used for the separation of some ores which are difficult to be sorted by mechanical methods or whose quality can not be guaranteed. For example, asbestos with long fiber and massive mica are selected from ore; Large gangue is picked out from kaolinite of coal measures. Hand picking is the simplest way of picking, but it has high labor intensity and low efficiency

2. Mechanical sorting γ According to the difference reflected by radiation or the difference of natural radiation ability of ore, the separation of ore and gangue is realized by means of instrument. For example:

radioactive sorting: associated ores containing uranium and thorium elements

ray absorption sorting: coal, iron and chromium ores

luminescent sorting: diamond, fluorite, scheelite and asbestos

photoelectric sorting: gypsum, talc, asbestos, marble, limestone, magnesite, wolframite, diamond

electromagnetic sorting: metal sulfide ore and oxide ore

With the development of modern science and technology, especially the application of electronic computer, the mechanical sorting is becoming more and more perfect, the efficiency is greatly improved, and the application field is graally expanded. At present, photoelectric sorting is more commonly used in the non-metallic ore instry with mature equipment

Fig. 2-1 mechanical picking principle diagram

Mechanical picking principle is shown in Fig. 2-1. The ore to be selected falls into the radiation area proced by the radioactive body evenly through the vibrating chute. Different physical signals will be generated after the ores of different properties are irradiated. The detector will send the detected signals to the information processing system, which will amplify and identify the signals, and finally send the command signal to the actuator, The actuator can divide the material into useful ore and waste rock. Generally, the high-speed air valve with up to 300 times per second is used in the actuator, which greatly improves the proction efficiency. The modern electronic technology is used as the control system with high degree of automation. The modern sorting machine has become a high-tech mineral processing equipment with camera, computer and so on

Friction ore washing is a kind of technology to treat the ore which is stuck with clay or contains more mud, including crushing and separation. For non-metallic minerals such as quartz and feldspar, after long-term weathering, the primary ore deposits exposed on the surface are wrapped by the decomposition procts of clay minerals or rocks, forming cemented or argillaceous bodies. In this case, the method of friction washing and disintegration, which is different from ore crushing, is often used to separate mineral monomers before separation, which can not only remove the surface adhesion of mineral particles, but also prevent unnecessary crushing or over crushing. Usually, minerals are soaked and washed in water medium, supplemented by mechanical agitation (adding dispersant if necessary). With the help of friction between minerals, mineral particles adhered by slime are separated from clay impurities, which is called friction washing. The surface of some weathered or primary fine-grained non-metallic minerals can be purified by friction washing to expose the surface which can reflect the properties of the ore itself. After the impurities are removed, not only the mineral particles themselves can be purified, but also the conditions for the subsequent purification operation (such as flotation) can be improved. Scrubbing (ore scrubbing) can not only be used as the preparation for other purification operations, but also complete the purification of minerals separately

Fig. 2-2 friction ore washing machines are mainly friction ore washing machines, cylinder ore washing machines, trough ore washing machines, etc. In addition, the double screw scrubbing machine is often used in the scrubbing and purification of some non-metallic minerals such as quartz and diatomite. The structure of friction washer is shown in Figure 2-2

6. Is this necessary! Internet cafes are no disk, restart on the restoration, with internet fees to mining dare to think ah, no loss of pants

7. IC2's
ore washing machine
can wash out
stone powder
, pure ore powder and small amount of metal powder (varying with mineral types) by adding water and putting
mineral powder
, which is used to increase mineral proction, but the efficiency is not high

8. No, unless your deep-water pump is equipped by the manufacturer with variable frequency starting, otherwise it is impossible

9. This is a normal phenomenon. As long as the mine is blasted in the dark night, even if it is rebuilt, the Elves will not go to mine. But when it's dark, you can use this method. The computer money won't increase. The computer is a program that is fixed. For example, when all the computer heroes die, the troops run away. When the computer troops rescue and March, they often line up in a long line, and they will not do anything else until they reach their destination, even if you attack them