Where is the miner display connected

1. What do you want to do with the monitor
there should be many mining machines and one monitor
you need to take a look at them at the beginning of setting

2. First, the display interface should match the interface of the graphics card.
Second, choose the one with good performance.
Third, choose the driver (catalyst) of the graphics card.
grasp these principles

3.

Tools / materials: take desktop case, computer monitor and computer monitor cable as an example

1. First, find the slot of the computer monitor cable at the bottom of the back of the computer monitor

4.

When the host computer has both integrated graphics card interface and independent graphics card interface, the signal line of the display should be connected with the interface of the independent graphics card to display normally. When the motherboard detects the existence of an independent graphics card, it will automatically shield the onboard integrated graphics card. As shown in the following figure:

5.

the two interfaces on the back of the host computer are different

because the host graphics card is: an on-board graphics card, an independent graphics card. Or two output interfaces of on-board graphics card:

1. If there are two interfaces of independent graphics card, the graphics card is a multi output interface graphics card, which can connect two monitors to display different contents at the same time

2. If the interface of the back two graphics cards of the computer host is centralized display and independent display respectively, then these two interfaces have no meaning and two meanings, and can only be used one by one

extended data

hardware composition of desktop PC host:

2. Power supply (host power supply system, used for power supply and voltage stabilization of host)

3. Motherboard (connecting the body of each hardware in the host)

CPU (the brain of the host computer, responsible for data processing)

5. Memory (temporarily storing data being called by computer)

6. Hard disk (the storage device of the host, which is used to store data)

7. Sound card (processing computer audio signal, with integrated motherboard and independent sound card)

Graphics card (processing computer video signal, including core graphics card (integrated) and independent graphics card)

9. Network card (processing network signals between computers, common personal hosts are integrated network cards, most servers are independent network cards)

10, CD-ROM (CD-ROM is used to read and write CD-ROM data)

Floppy disk drive (floppy disk drive is used to read and write floppy disk data, and floppy disk has been completely eliminated)

12. Radiator (the equipment used for cooling high temperature components in the host)

13. Power on and restart button

Other uncommon hardware

6. Host terminal in the following independent graphics card, display connected to any one of the DP interface, I see you use the DP line

7. Yes, they are both two sockets. The interface to the host is the same. The new one is replaced by the HD data interface, which is still connected to the host. Generally, the power supply is directly connected. The old and Lenovo display power supply is connected to the chassis power supply.... But it's rare. So, to sum up, the display on the two lines, a data line, a power line, connect the host and power is good..

8. You don't know about the VGA port of the graphics card on the back panel of the chassis... Just observe: which interface pin is the same as that line, have more arrangement, align and tighten the screw after inserting

9. It depends on what host you ask specifically. If XO supports VGA, DVI and hdmivga, you must use XO dedicated cable with red and white audio cable on it. If you connect your external speaker PS3, it seems that it doesn't support VGA, but it has DVI and HDMI available. Wii has never studied it