What is the relationship between the old stoppage of mining mach
Publish: 2021-05-07 13:26:58
1. Generally speaking, press the three keys of Ctrl + Alt + delete
the specific operation methods are as follows:
1. Judge that the machine is in a dead state. The way to change the state is to press the NumLock key to see if the num light will change the state with the pressing of the key. If it doesn't change, it will be in a crash state
2. If the machine is in a dead state, press the CTRL and ALT keys with your left hand, and then press the delete key with your right hand while keeping pressing
3. The system will restart.
the specific operation methods are as follows:
1. Judge that the machine is in a dead state. The way to change the state is to press the NumLock key to see if the num light will change the state with the pressing of the key. If it doesn't change, it will be in a crash state
2. If the machine is in a dead state, press the CTRL and ALT keys with your left hand, and then press the delete key with your right hand while keeping pressing
3. The system will restart.
2. If it doesn't crash immediately, just use the old method to turn off the fan and pull it out one by one to try. The heat increase will make the faulty graphics card crash faster, so that the faulty one can be found as soon as possible. However, isn't bitcoin banned in China
3. I think the power supply is small. Are you six of the same graphics cards? According to the full load of 350W, six power sources should be more than 2000W. Crash is a sign of insufficient power.
4. Alas! I think everyone who uses a computer will encounter this situation, especially those who often run various large software or run many software at the same time. For game players, it is a pity that the game progress is not saved. For those users who are editing or processing important data but do not save it, the "pity degree" will be greater...
crash is the most common kind of computer failure, and it is also the most headache. Because the fault point can be large or small, and
and there are many reasons for the crash, in addition, the fault phenomenon is also diverse, but the author puts the fault phenomenon into two categories: regular crash and random crash. As for the subjective performance of the crash phenomenon, most of them are "blue screen", the screen "freeze" has no response (at the same time, the mouse and keyboard can not input), often illegal operation (or forced to close a program), and they have lost their response before entering the operating system
at first glance, it seems that the crash is very "terrible", but the cause of the crash can never be separated from the hardware and software. Therefore, as long as we know the specific cause of the crash, we can completely "smooth out" the crash, or even eliminate it. Although "crash" articles have been published in some newspapers and periodicals, most of them are not comprehensive enough and have some misunderstandings, which usually can not solve any problems. Therefore, the author will classify the "crash" causes and treatment methods (combined with the fault phenomenon) according to the "prerequisite" of the crash, I hope it will help you
the first kind of situation: in the normal use of the situation, occasionally and increasingly frequent crash, or after a sudden crash occurs frequently
1. Frequent "crash" failures caused by too much st
after a new computer is used in general cities in China for about a year, there will be a lot of st inside it. If it enters the slot of a board, it may cause the board to have poor contact and crash or other failures, and it often crashes for no reason
in addition, too much st in the machine will have a bad impact on the heat dissipation of some important computer hardware equipment. If the heat dissipation of important hardware such as CPU and graphics card is not good, it will naturally cause the blue screen or splash screen or freeze frame or black screen crash. Although there is no rule for this kind of crash phenomenon, the longer it is used, the more frequent it will crash. If there is too much st on the floppy drive head or the laser head of the optical drive, it will lead to the difficulty of reading and writing the disk, and even cause the computer blue screen to crash
so you'd better st the computer once a year. Of course, if you are just a beginner, you need to find an old hand to operate it for you, so as not to cause other faults. Of course, keeping the computer room clean is also a very good measure
, frequent "crash" failures caused by poor heat dissipation of some hardware
CPU, graphics card, hard disk, power supply and other hardware have very large heat in their work. Fortunately, most of them have their own cooling fans, so they usually do not crash, But if the st on the fan is too much, or the lubrication is poor, or the wear is serious or the aging is serious, then the heat dissipation of these hardware devices will have problems. Over time, with the continuous deterioration of the situation, there will be frequent crashes or restarts after a period of time
so you should check the working condition of the fans in the computer regularly and lubricate them regularly to avoid such faults. If there is a frequent crash every time you use it, don't worry. Just open the chassis and observe which fan is abnormal when the computer is running (such as loud noise or obviously slow down or stalling) or which hardware temperature is abnormal (such as touching a chip or heat sink with your hand is very hot), and then do the corresponding treatment
in addition, too long working hours can also lead to computer crash. I remember that once when I went to work in Haier instry and trade, I happened to encounter a black screen crash of Haier P Ⅲ computer in use without any reason. The operator and several colleagues tried many ways, but they didn't solve the problem. Just when she learned that I was in instry and trade, she found the author, because it was more than 4 p.m, So the author suspected that the crash was caused by too long use time, so he pulled the power plug of the computer from the multi-functional power socket, and then told her not to plug it in first, and let her connect the power supply and then turn it on when the author finished. After observing for a while, the author found that there was no crash again, so he decided that the machine was normal. Although the fault has been repaired (it has not been reported to be committed again so far), the fault point has not been determined, because the power supply and CPU are "suspected", but one thing is certain - the fault is caused by the high temperature of a hardware
3. There is a conflict in the memory, which leads to an unexplained "crash" fault.
this situation is easy to occur when multiple software are running at the same time. Although sometimes many software are running at the same time and everything is normal, sometimes they suddenly crash for no reason. It is very normal when these applications are running again after restarting, In fact, many of these failures are just fake crashes, most of which are caused by memory resource conflicts - application software runs in memory, but some application software will use the same memory address with another software at the same time e to design reasons, which will lead to conflicts. This type of crash is usually a freeze or restart or a blue screen or a prompt for "illegal operation" or loss of response
this kind of fault can only be avoided, but not eradicated, that is, try not to let many programs run at the same time, and it is better to turn off the software that has not been used immediately. In addition, try to use famous software to avoid this kind of fault. Of course, if you are patient, the computer may wake up from suspended animation later. Once, when I was playing "biography of the heroes of the Three Kingdoms", the computer crashed (I started a lot of programs at the same time), but I just waited for half an hour (I went to eat a plate)<
4. The "crash" fault caused by overclocking
many DIYers like to overclock all kinds of hardware, some of them are single CPU, some of them need to overclock everything, because they will pay attention to the stability when overclocking - otherwise they can't use the computer normally, So there won't be any problem in a period of time after overclocking, but after using a stage, the system will become unstable with the increase of st and the power of various fans. After all, the more the fans use, the smaller the wind. At this time, if you run large software (such as 3D games) for a long time or perform multi task operation, So CPU and other chips are likely to appear electronic drift phenomenon and cause frequent crash phenomenon. Fortunately, there is a feature of this kind of crash failure - as long as you turn on the CPU cooling software (almost all users are using it) and do not use large software, you will not crash, otherwise you may take some detours
so although overclocking can improve the system performance, it will also make its stability worse. The solution, of course, is to adjust the working frequency of each equipment back to the default value. If you have to exceed it, you must regularly check the cooling system or strengthen the cooling work (such as replacing a brand-name fan with higher power), and do not exceed the frequency too high (preferably not more than 30%)
, irregular "crash" phenomenon caused by poor connector contact
this kind of fault is easy to distinguish, because no matter how small a program you run, it may crash, even sometimes it will freeze at startup, and sometimes it will not crash even if you run a large program for a long time. So the fault point of this kind of fault is very easy to find. Usually, you just need to remove all the things that can be removed (such as graphics card and power plug, etc.) for cleaning, and then plug them in. Of course, if there is any rust, you need to remove the rust or replace the rusty part with a new one
6. Frequent "crash" failure caused by memory mole failure
as the working frequency of memory mole becomes higher and higher, its calorific value also increases, and the stability is relatively poor. Generally, memory mole failure refers to memory mole looseness, false soldering or memory chip damage or instability
if you often appear in the windows operating system with memory related illegal operation and other crash phenomenon, or directly prompt the registry error and restart the machine, then we need to check whether the memory mole is loose or sty and has entered the memory slot, if no exception is found, you need to try to change the memory mole, If everything is normal, it means that the memory mole itself may have a fault. Of course, sometimes long-term overclocking will cause the memory mole to age and become more and more unstable
7. Too little free space or too many disk fragments on the hard disk will also lead to "crash"
because some large applications need a lot of memory when running, if the physical memory is insufficient, the virtual memory on the hard disk will be used. At this time, if the free space on the hard disk is too little, it may cause crash. In addition, if your computer does not defragment the hard disk for a long time, it will also make the system resources nervous and crash. Of course, if there are too many junk files in the hard disk, it will also make it difficult for the hard disk to find files and crash. The performance of this kind of failure is also quite special - usually when the hard disk is continuously "Crazy" to read and write the disk, it will suddenly freeze or blue screen crash
therefore, you'd better set the virtual memory to the partition with large remaining space, and regularly clean up all kinds of junk files and disk fragments
8. Frequent "crash" failure caused by hard disk failure
if the hard disk is seriously aged or vibrated ring operation, or if there are logical or physical bad paths or bad sectors, then the computer is prone to frequent crash failure ring operation. As for the best way to deal with it is to replace the hard disk. Of course, if it's just a logic error, you can still use various repair software to repair it. Because some of these faults are not easy to find, so I suggest that you regularly carry out "disk scanning program" (once every two weeks), so that you can have a clear idea of your hard disk
the author has an article on "Tianji myhard" dedicated to the use and maintenance of hard disk. If you are interested, you can have a look, so that you can avoid hard disk failure
9. Frequent "crash" failures caused by inferior accessories
such failures are mostly caused by the use of miscellaneous brand procts or second-hand procts or repaired procts. If it is a new computer, it is better to eliminate the resource conflict in the "device manager"
crash is the most common kind of computer failure, and it is also the most headache. Because the fault point can be large or small, and
and there are many reasons for the crash, in addition, the fault phenomenon is also diverse, but the author puts the fault phenomenon into two categories: regular crash and random crash. As for the subjective performance of the crash phenomenon, most of them are "blue screen", the screen "freeze" has no response (at the same time, the mouse and keyboard can not input), often illegal operation (or forced to close a program), and they have lost their response before entering the operating system
at first glance, it seems that the crash is very "terrible", but the cause of the crash can never be separated from the hardware and software. Therefore, as long as we know the specific cause of the crash, we can completely "smooth out" the crash, or even eliminate it. Although "crash" articles have been published in some newspapers and periodicals, most of them are not comprehensive enough and have some misunderstandings, which usually can not solve any problems. Therefore, the author will classify the "crash" causes and treatment methods (combined with the fault phenomenon) according to the "prerequisite" of the crash, I hope it will help you
the first kind of situation: in the normal use of the situation, occasionally and increasingly frequent crash, or after a sudden crash occurs frequently
1. Frequent "crash" failures caused by too much st
after a new computer is used in general cities in China for about a year, there will be a lot of st inside it. If it enters the slot of a board, it may cause the board to have poor contact and crash or other failures, and it often crashes for no reason
in addition, too much st in the machine will have a bad impact on the heat dissipation of some important computer hardware equipment. If the heat dissipation of important hardware such as CPU and graphics card is not good, it will naturally cause the blue screen or splash screen or freeze frame or black screen crash. Although there is no rule for this kind of crash phenomenon, the longer it is used, the more frequent it will crash. If there is too much st on the floppy drive head or the laser head of the optical drive, it will lead to the difficulty of reading and writing the disk, and even cause the computer blue screen to crash
so you'd better st the computer once a year. Of course, if you are just a beginner, you need to find an old hand to operate it for you, so as not to cause other faults. Of course, keeping the computer room clean is also a very good measure
, frequent "crash" failures caused by poor heat dissipation of some hardware
CPU, graphics card, hard disk, power supply and other hardware have very large heat in their work. Fortunately, most of them have their own cooling fans, so they usually do not crash, But if the st on the fan is too much, or the lubrication is poor, or the wear is serious or the aging is serious, then the heat dissipation of these hardware devices will have problems. Over time, with the continuous deterioration of the situation, there will be frequent crashes or restarts after a period of time
so you should check the working condition of the fans in the computer regularly and lubricate them regularly to avoid such faults. If there is a frequent crash every time you use it, don't worry. Just open the chassis and observe which fan is abnormal when the computer is running (such as loud noise or obviously slow down or stalling) or which hardware temperature is abnormal (such as touching a chip or heat sink with your hand is very hot), and then do the corresponding treatment
in addition, too long working hours can also lead to computer crash. I remember that once when I went to work in Haier instry and trade, I happened to encounter a black screen crash of Haier P Ⅲ computer in use without any reason. The operator and several colleagues tried many ways, but they didn't solve the problem. Just when she learned that I was in instry and trade, she found the author, because it was more than 4 p.m, So the author suspected that the crash was caused by too long use time, so he pulled the power plug of the computer from the multi-functional power socket, and then told her not to plug it in first, and let her connect the power supply and then turn it on when the author finished. After observing for a while, the author found that there was no crash again, so he decided that the machine was normal. Although the fault has been repaired (it has not been reported to be committed again so far), the fault point has not been determined, because the power supply and CPU are "suspected", but one thing is certain - the fault is caused by the high temperature of a hardware
3. There is a conflict in the memory, which leads to an unexplained "crash" fault.
this situation is easy to occur when multiple software are running at the same time. Although sometimes many software are running at the same time and everything is normal, sometimes they suddenly crash for no reason. It is very normal when these applications are running again after restarting, In fact, many of these failures are just fake crashes, most of which are caused by memory resource conflicts - application software runs in memory, but some application software will use the same memory address with another software at the same time e to design reasons, which will lead to conflicts. This type of crash is usually a freeze or restart or a blue screen or a prompt for "illegal operation" or loss of response
this kind of fault can only be avoided, but not eradicated, that is, try not to let many programs run at the same time, and it is better to turn off the software that has not been used immediately. In addition, try to use famous software to avoid this kind of fault. Of course, if you are patient, the computer may wake up from suspended animation later. Once, when I was playing "biography of the heroes of the Three Kingdoms", the computer crashed (I started a lot of programs at the same time), but I just waited for half an hour (I went to eat a plate)<
4. The "crash" fault caused by overclocking
many DIYers like to overclock all kinds of hardware, some of them are single CPU, some of them need to overclock everything, because they will pay attention to the stability when overclocking - otherwise they can't use the computer normally, So there won't be any problem in a period of time after overclocking, but after using a stage, the system will become unstable with the increase of st and the power of various fans. After all, the more the fans use, the smaller the wind. At this time, if you run large software (such as 3D games) for a long time or perform multi task operation, So CPU and other chips are likely to appear electronic drift phenomenon and cause frequent crash phenomenon. Fortunately, there is a feature of this kind of crash failure - as long as you turn on the CPU cooling software (almost all users are using it) and do not use large software, you will not crash, otherwise you may take some detours
so although overclocking can improve the system performance, it will also make its stability worse. The solution, of course, is to adjust the working frequency of each equipment back to the default value. If you have to exceed it, you must regularly check the cooling system or strengthen the cooling work (such as replacing a brand-name fan with higher power), and do not exceed the frequency too high (preferably not more than 30%)
, irregular "crash" phenomenon caused by poor connector contact
this kind of fault is easy to distinguish, because no matter how small a program you run, it may crash, even sometimes it will freeze at startup, and sometimes it will not crash even if you run a large program for a long time. So the fault point of this kind of fault is very easy to find. Usually, you just need to remove all the things that can be removed (such as graphics card and power plug, etc.) for cleaning, and then plug them in. Of course, if there is any rust, you need to remove the rust or replace the rusty part with a new one
6. Frequent "crash" failure caused by memory mole failure
as the working frequency of memory mole becomes higher and higher, its calorific value also increases, and the stability is relatively poor. Generally, memory mole failure refers to memory mole looseness, false soldering or memory chip damage or instability
if you often appear in the windows operating system with memory related illegal operation and other crash phenomenon, or directly prompt the registry error and restart the machine, then we need to check whether the memory mole is loose or sty and has entered the memory slot, if no exception is found, you need to try to change the memory mole, If everything is normal, it means that the memory mole itself may have a fault. Of course, sometimes long-term overclocking will cause the memory mole to age and become more and more unstable
7. Too little free space or too many disk fragments on the hard disk will also lead to "crash"
because some large applications need a lot of memory when running, if the physical memory is insufficient, the virtual memory on the hard disk will be used. At this time, if the free space on the hard disk is too little, it may cause crash. In addition, if your computer does not defragment the hard disk for a long time, it will also make the system resources nervous and crash. Of course, if there are too many junk files in the hard disk, it will also make it difficult for the hard disk to find files and crash. The performance of this kind of failure is also quite special - usually when the hard disk is continuously "Crazy" to read and write the disk, it will suddenly freeze or blue screen crash
therefore, you'd better set the virtual memory to the partition with large remaining space, and regularly clean up all kinds of junk files and disk fragments
8. Frequent "crash" failure caused by hard disk failure
if the hard disk is seriously aged or vibrated ring operation, or if there are logical or physical bad paths or bad sectors, then the computer is prone to frequent crash failure ring operation. As for the best way to deal with it is to replace the hard disk. Of course, if it's just a logic error, you can still use various repair software to repair it. Because some of these faults are not easy to find, so I suggest that you regularly carry out "disk scanning program" (once every two weeks), so that you can have a clear idea of your hard disk
the author has an article on "Tianji myhard" dedicated to the use and maintenance of hard disk. If you are interested, you can have a look, so that you can avoid hard disk failure
9. Frequent "crash" failures caused by inferior accessories
such failures are mostly caused by the use of miscellaneous brand procts or second-hand procts or repaired procts. If it is a new computer, it is better to eliminate the resource conflict in the "device manager"
5. The causes of computer crash are as follows:
the system can't be started, the screen "freeze" has no response, the mouse and keyboard can't be input, and the software operation is interrupted abnormally. Although there are many reasons for the crash, it can never be separated from hardware and software<
crash caused by hardware
[poor heat dissipation] the display, power supply and CPU are very hot in operation, so it is very important to maintain good ventilation. If the display is overheated, it will lead to color, image distortion and even shorten the life of the display. Too long working time will also lead to poor cooling of power supply or monitor, resulting in computer crash. CPU cooling is an important issue related to the stability of computer operation, and it is also the "disaster area" of cooling failure
[improper movement] when the computer is moving, it is subject to great vibration, which often makes the internal parts of the machine loose, resulting in poor contact and computer crash. Therefore, violent vibration should be avoided when moving the computer
[st killer] too much st in the machine can also cause crash. If the floppy disk or CD-ROM laser head is contaminated with too much st, it will cause reading and writing errors, and even cause computer crash
[device mismatch] if the main frequency of the main board does not match the main frequency of the CPU, and the external frequency is set too high when the old main board is overclocking, the stability of operation may not be guaranteed, resulting in frequent crashes
[incompatibility of software and hardware] 3D software and some special software may not start or even install normally on some microcomputers, among which there may be problems in software and hardware compatibility
[memory mole failure] is mainly caused by loose memory mole, faulty soldering or the quality of memory chip itself. If there is a problem with the quality of the memory mole, it is necessary to replace the memory to solve the problem
[hard disk failure] is mainly caused by the aging of hard disk or bad channel and bad sector caused by improper use. In this way, the machine is prone to crash when it is running. The special tool software can be used for troubleshooting. If the damage is serious, the hard disk can only be replaced. In addition, for the motherboard which does not support UDMA 66 / 100, we should pay attention to the setting of hard disk operation mode in CMOS
[CPU overclocking] overclocking improves the working frequency of CPU, and at the same time, it may make its performance unstable. The reason is that the speed of CPU accessing data in memory is faster than the speed of exchanging data between memory and hard disk. Overclocking makes this contradiction more prominent and aggravates the situation that the required data can not be found in memory or virtual memory, which will lead to "abnormal error". The solution, of course, is to let the CPU return to the normal frequency
[memory mole failure] is mainly caused by loose memory mole, faulty soldering or the quality of memory chip itself. If there is a problem with the quality of the memory mole, it is necessary to replace the memory to solve the problem
[hard disk failure] is mainly caused by the aging of hard disk or bad channel and bad sector caused by improper use. In this way, the machine is prone to crash when it is running. The special tool software can be used for troubleshooting. If the damage is serious, the hard disk can only be replaced. In addition, for the motherboard which does not support UDMA 66 / 100, we should pay attention to the setting of hard disk operation mode in CMOS
[CPU overclocking] overclocking improves the working frequency of CPU, and at the same time, it may make its performance unstable. The reason is that the speed of CPU accessing data in memory is faster than the speed of exchanging data between memory and hard disk. Overclocking makes this contradiction more prominent and aggravates the situation that the required data can not be found in memory or virtual memory, which will lead to "abnormal error". The solution, of course, is to let the CPU return to the normal frequency
[hardware resource conflict] is an abnormal error caused by the setting conflict of sound card or display card. In addition, in case of interruption, DMA or port conflict of other devices, a few drivers may be abnormal, resulting in crash. The solution is to start in "safe mode" and make appropriate adjustment in "control panel" → "system" → "equipment management". For abnormal errors in the driver, you can modify the registry. Select "run", type "regedit", enter the registry editor, find and delete all "primary key" and "key value" related to the prefix string of the driver through the "search" function under the menu, and restart
[insufficient memory capacity] the larger the memory capacity is, the better. It should not be less than 0.5-1% of the hard disk capacity. If this problem occurs, the memory mole with the largest capacity should be replaced
[inferior parts] when assembling compatible machines for customers, a few illegal businessmen use inferior boards and memory, and some even sell counterfeit motherboards and marked CPUs and memory. Such machines are very unstable in operation, and it is inevitable that they crash. Therefore, users should be vigilant when purchasing the machine, and can test the computer with some relatively new tools and software, continuously test the machine for a long time (such as 72 hours), and strive for as long as possible warranty time
crash caused by software
[virus infection] the virus can make the computer work efficiency decline sharply and cause frequent crash. At this time, we need anti-virus software such as kv300, Jinshan Duba, Ruixing, etc. to conct a comprehensive anti-virus inspection and update the anti-virus software regularly
[improper CMOS setting] this fault phenomenon is very common, such as improper hard disk parameter setting, mode setting and memory parameter setting, resulting in the computer unable to start. If the memory without ECC function is set to have ECC function, it will crash e to memory error
[mistakenly deleting system files] because Windows 9x needs command.com, io.sys, msdos.sys and other files to start, if these files are damaged or mistakenly deleted, even if the hardware settings in CMOS are correct, it is useless. Solution: use the startup disk of the same version of the operating system to start the computer, and then type "sys C:" to retransmit the system files
[initialization file is damaged] because system.ini, win.ini and registry files need to be read when Windows 9x starts, if there are config.sys and autoexec.bat files, they will also be read. As long as there are error messages in these files, they may crash, especially system.ini, win.ini, user.dat and system.dat.
the system can't be started, the screen "freeze" has no response, the mouse and keyboard can't be input, and the software operation is interrupted abnormally. Although there are many reasons for the crash, it can never be separated from hardware and software<
crash caused by hardware
[poor heat dissipation] the display, power supply and CPU are very hot in operation, so it is very important to maintain good ventilation. If the display is overheated, it will lead to color, image distortion and even shorten the life of the display. Too long working time will also lead to poor cooling of power supply or monitor, resulting in computer crash. CPU cooling is an important issue related to the stability of computer operation, and it is also the "disaster area" of cooling failure
[improper movement] when the computer is moving, it is subject to great vibration, which often makes the internal parts of the machine loose, resulting in poor contact and computer crash. Therefore, violent vibration should be avoided when moving the computer
[st killer] too much st in the machine can also cause crash. If the floppy disk or CD-ROM laser head is contaminated with too much st, it will cause reading and writing errors, and even cause computer crash
[device mismatch] if the main frequency of the main board does not match the main frequency of the CPU, and the external frequency is set too high when the old main board is overclocking, the stability of operation may not be guaranteed, resulting in frequent crashes
[incompatibility of software and hardware] 3D software and some special software may not start or even install normally on some microcomputers, among which there may be problems in software and hardware compatibility
[memory mole failure] is mainly caused by loose memory mole, faulty soldering or the quality of memory chip itself. If there is a problem with the quality of the memory mole, it is necessary to replace the memory to solve the problem
[hard disk failure] is mainly caused by the aging of hard disk or bad channel and bad sector caused by improper use. In this way, the machine is prone to crash when it is running. The special tool software can be used for troubleshooting. If the damage is serious, the hard disk can only be replaced. In addition, for the motherboard which does not support UDMA 66 / 100, we should pay attention to the setting of hard disk operation mode in CMOS
[CPU overclocking] overclocking improves the working frequency of CPU, and at the same time, it may make its performance unstable. The reason is that the speed of CPU accessing data in memory is faster than the speed of exchanging data between memory and hard disk. Overclocking makes this contradiction more prominent and aggravates the situation that the required data can not be found in memory or virtual memory, which will lead to "abnormal error". The solution, of course, is to let the CPU return to the normal frequency
[memory mole failure] is mainly caused by loose memory mole, faulty soldering or the quality of memory chip itself. If there is a problem with the quality of the memory mole, it is necessary to replace the memory to solve the problem
[hard disk failure] is mainly caused by the aging of hard disk or bad channel and bad sector caused by improper use. In this way, the machine is prone to crash when it is running. The special tool software can be used for troubleshooting. If the damage is serious, the hard disk can only be replaced. In addition, for the motherboard which does not support UDMA 66 / 100, we should pay attention to the setting of hard disk operation mode in CMOS
[CPU overclocking] overclocking improves the working frequency of CPU, and at the same time, it may make its performance unstable. The reason is that the speed of CPU accessing data in memory is faster than the speed of exchanging data between memory and hard disk. Overclocking makes this contradiction more prominent and aggravates the situation that the required data can not be found in memory or virtual memory, which will lead to "abnormal error". The solution, of course, is to let the CPU return to the normal frequency
[hardware resource conflict] is an abnormal error caused by the setting conflict of sound card or display card. In addition, in case of interruption, DMA or port conflict of other devices, a few drivers may be abnormal, resulting in crash. The solution is to start in "safe mode" and make appropriate adjustment in "control panel" → "system" → "equipment management". For abnormal errors in the driver, you can modify the registry. Select "run", type "regedit", enter the registry editor, find and delete all "primary key" and "key value" related to the prefix string of the driver through the "search" function under the menu, and restart
[insufficient memory capacity] the larger the memory capacity is, the better. It should not be less than 0.5-1% of the hard disk capacity. If this problem occurs, the memory mole with the largest capacity should be replaced
[inferior parts] when assembling compatible machines for customers, a few illegal businessmen use inferior boards and memory, and some even sell counterfeit motherboards and marked CPUs and memory. Such machines are very unstable in operation, and it is inevitable that they crash. Therefore, users should be vigilant when purchasing the machine, and can test the computer with some relatively new tools and software, continuously test the machine for a long time (such as 72 hours), and strive for as long as possible warranty time
crash caused by software
[virus infection] the virus can make the computer work efficiency decline sharply and cause frequent crash. At this time, we need anti-virus software such as kv300, Jinshan Duba, Ruixing, etc. to conct a comprehensive anti-virus inspection and update the anti-virus software regularly
[improper CMOS setting] this fault phenomenon is very common, such as improper hard disk parameter setting, mode setting and memory parameter setting, resulting in the computer unable to start. If the memory without ECC function is set to have ECC function, it will crash e to memory error
[mistakenly deleting system files] because Windows 9x needs command.com, io.sys, msdos.sys and other files to start, if these files are damaged or mistakenly deleted, even if the hardware settings in CMOS are correct, it is useless. Solution: use the startup disk of the same version of the operating system to start the computer, and then type "sys C:" to retransmit the system files
[initialization file is damaged] because system.ini, win.ini and registry files need to be read when Windows 9x starts, if there are config.sys and autoexec.bat files, they will also be read. As long as there are error messages in these files, they may crash, especially system.ini, win.ini, user.dat and system.dat.
6. Based on my personal experience in repairing computers, I can sum up the following situations. 1. Hardware incompatibility causes the hardware to work abnormally and the system crashes. It is recommended that you use a special hardware detection tool to see if it is not a hardware quality problem. Compatibility problems are very common., 2. Software driver compatibility. I guess the system you installed should be ghost. Please pay attention to whether your network card driver is the original network card driver. Generally, 80% of the system crashes e to incompatible network card drivers. It is recommended that you remove the network card driver from the system and install the original network card driver. 3. Please confirm whether the system is slow e to the circuit problem of the machine itself. I remember that a user called a few days ago and told me that his computer was down and the mouse couldn't be used. Only when he arrived did he know that he didn't plug in the mouse cable properly. 4. Use mainstream anti-virus software to check and kill the whole system to make sure that your system is infected with a virus. Now the virus is very rampant, It is recommended that you use Kaba + 360 + ARP firewall in the future
if the computer configuration is not very good, it is recommended to use rising + 360 + ARP firewall. I hope you can repair your computer as soon as possible~
if the computer configuration is not very good, it is recommended to use rising + 360 + ARP firewall. I hope you can repair your computer as soon as possible~
7. The reason why the computer runs slowly, let me tell you
there are many people who say how slow their computers are. In fact, the reasons why their computers are slow, if all the reasons are figured out, there are many! But I will introce the main reason why the computer is slow here
1. Too many programs are loaded when the computer is turned on
2. The tablecloth is turned on on the desktop
3. The hard disk is not cleaned regularly and the hard disk is reorganized
below, I will explain in detail how to speed up the computer and make the computer slow! When the computer slows down suddenly, you may wonder if you have done something wrong and damaged the computer? In fact, don't worry too much, because a small change may affect the performance of the computer operation, and in the process of using the computer, it will inevitably cause a variety of micro changes. There is always a way to solve any problem. Let me elaborate on the seven common reasons that affect the performance of the computer. After solving them, I can enjoy the high performance of the computer
4. Delete resident program
what is resident program? Resident programs are programs that are loaded at boot time, and those programs are called resident programs. Resident programs not only slow down the boot time, but also consume computer resources and memory more quickly, but you may ask: those programs are all useful! What I can answer you is: do you want those useful programs to sacrifice speed, or don't you want those programs to restore speed? Think for yourself! Generally speaking, if you want to delete the resident program, you can go to & quot; Start & quot; But if you want to be more detailed, such as ICQ, popmiller and other software, you can't delete them in & quot; Start & quot; For those deleted from the list, go to & quot; Satellite Applications & quot;, Then go to & quot; System tools;, Go to & quot; System information;, After you go in, click & quot; Tools & quot;, Press & quot; System configuration editor;, After going in, at & quot; Start & quot; Dialog box, will be listed in detail when starting the computer to load the resident program
5. Don't put tablecloths on the desktop and turn off active desktop
I wonder if you have noticed that the tablecloths we always put on the desktop are actually a waste of computer resources! Not only that, but also slow down the computer in the execution of applications! I want to beautify the desktop, but slow down the speed of the computer, at this time, do you have a kind of & quot; I don't know how; How do you feel? Another point, I don't know if you've ever tried, is that when you open the tablecloth, every time you close the largest window, the window will always fall from top to bottom, slowly and slowly. If this happens, you must close the tablecloth! The method is: right click on the desktop, then press content, and then click & quot; Background & quot; Select & quot; No & quot;, It is suggested that in & quot; Appearance & quot; In the dialog box, change the preset cyan color on the desktop to black...... As for closing active desktop, that is to say, you are asked to close the web screen on the desktop. For example, right-click on the desktop, then press content, and then click & quot; Background & quot; Dialog box, there is a tablecloth, named Windows 98, that is the web screen! So don't turn it on. As I said, cloth can only be described in four words, that is & quot; Beauty is in trouble
6. Delete some unnecessary font types
one of the reasons why the system runs slowly is the relationship between font types! The more fonts you install, the more memory you use, which slows down your computer! So we need to delete some unnecessary fonts. To delete some unnecessary fonts, you can go to the console and enter another one called & quot; Font & quot; However, how can we know which words are useful and which are not? For example, if you don't visit MS often_ DOS mode, then delete the DOS font! Because everyone may like a certain font, so I'm not sure I want to delete those font, but I have a secret here to teach you. If you have Huakang bold black font, and you have the new fine Ming font, I suggest you delete Huakang bold black font. If you have the new fine Ming font, and you have the new fine Ming font, you can delete the fine Ming font
7. Reorganize the hard disk regularly
the smallest unit in the computer hard disk is sector. A file usually occupies several sectors. Every time the hard disk is used for a long time, after countless times of adding, changing and deleting files, it will cause many intermittent sectors, so there will be more and more non continuous files, The hard disk head needs to spend more time hopping to read data, which leads to the slow down of the hard disk. In view of this, windows will have & quot; Reorganize disk & quot; appear. Just execute & quot; Reorganizing disks;, All the discontinuous files will be rearranged in a neat way. As for the execution time, about once a week is enough< There is a big data exchange file in the hard disk, which is reserved by the system for the temporary storage of the virtual memory. Many applications often use it, so the system often needs to access a large amount of data to the main memory, so the speed of accessing this file constitutes a very important factor affecting the speed of the computer! In general, Win98 is designed to manage the virtual memory by the system itself. It will automatically adjust the size of the swap file according to the needs of different programs. However, such a rection will bring extra burden to the system and slow down the operation of the system! In view of this, users had better set the minimum and maximum value of virtual memory to avoid changing the size frequently. To set the virtual memory, in & quot; My computer & quot; Right click in, and then press content to & quot; Efficiency & quot; In the dialog box, press & quot; Virtual memory;, Then select & quot; Let yourself set the virtual memory settings;, Set & quot; Minimum value & quot; 64, because my computer is 32MB ram, so I set it to 64, that is to say, if your memory is 64MB, then in & quot; Minimum value & quot; In this case, it is set to 128. By the way, in & quot; Efficiency & quot; Select & quot; Archives;, Set the & quot; Desktop computer;, Change to & quot; Network server;, It will speed up the operation of the system; Also, in & quot; Disk & quot; Do not select & quot; Search for a new disk drive every time you boot up;, It will speed up the startup< Although you already know how to add and remove some resident programs, do you know what the computer is doing from boot to Win98? Or, what program is being executed? Those programs must be fully loaded before they start to enter Win98. Have you ever thought that if you can delete some unnecessary startup programs, will the startup speed be accelerated? The answer is yes! To modify it, press & quot; Start & quot;, Select & quot; Execute & quot;, Then type in win.ini. After opening, you can delete the content of the following paragraphs. If you want to delete the content, don't even delete the title! They include: [compatibility], [compatibility 32], [timeliness], [compatibility 95], [molecule compatibility]< As we all know, if you want to remove some programs, you can go to & quot; Add / Remove Programs & quot; But do you know that it will only help you remove the program, not the registration code and some login items of the program? It's not that Win98 is stupid, but that it's not professional enough in this respect. To completely delete the program, we need to find some & quot; Major & quot; Remove software to remove it! Previously, Symantec's Norton universal (hereinafter referred to as NUD) has stopped selling all over the world because some parts of it have damaged the right of some deleted software. That's why Symantec came out with CleanSweep (hereinafter referred to as CS). However, in terms of function, NUD is better than CS! In fact, in addition to these two softwares, there are many similar softwares that can effectively remove programs. Since NUD is out of print, let me say CS. After downloading and installing, if you want to remove the program, just use CS to remove it, it will remove the login item and registration code of the program! I'm here to help you; Add / Remove Programs & quot; Changed an alias, that is & quot; Add garbage, remove program & quot;! Garbage refers to the abandoned login project and registration code, the program is the program
do well in the above ten points, and I believe your love plane is already flying fast. Of course, if it's still very slow, you should consider upgrading the hardware.
there are many people who say how slow their computers are. In fact, the reasons why their computers are slow, if all the reasons are figured out, there are many! But I will introce the main reason why the computer is slow here
1. Too many programs are loaded when the computer is turned on
2. The tablecloth is turned on on the desktop
3. The hard disk is not cleaned regularly and the hard disk is reorganized
below, I will explain in detail how to speed up the computer and make the computer slow! When the computer slows down suddenly, you may wonder if you have done something wrong and damaged the computer? In fact, don't worry too much, because a small change may affect the performance of the computer operation, and in the process of using the computer, it will inevitably cause a variety of micro changes. There is always a way to solve any problem. Let me elaborate on the seven common reasons that affect the performance of the computer. After solving them, I can enjoy the high performance of the computer
4. Delete resident program
what is resident program? Resident programs are programs that are loaded at boot time, and those programs are called resident programs. Resident programs not only slow down the boot time, but also consume computer resources and memory more quickly, but you may ask: those programs are all useful! What I can answer you is: do you want those useful programs to sacrifice speed, or don't you want those programs to restore speed? Think for yourself! Generally speaking, if you want to delete the resident program, you can go to & quot; Start & quot; But if you want to be more detailed, such as ICQ, popmiller and other software, you can't delete them in & quot; Start & quot; For those deleted from the list, go to & quot; Satellite Applications & quot;, Then go to & quot; System tools;, Go to & quot; System information;, After you go in, click & quot; Tools & quot;, Press & quot; System configuration editor;, After going in, at & quot; Start & quot; Dialog box, will be listed in detail when starting the computer to load the resident program
5. Don't put tablecloths on the desktop and turn off active desktop
I wonder if you have noticed that the tablecloths we always put on the desktop are actually a waste of computer resources! Not only that, but also slow down the computer in the execution of applications! I want to beautify the desktop, but slow down the speed of the computer, at this time, do you have a kind of & quot; I don't know how; How do you feel? Another point, I don't know if you've ever tried, is that when you open the tablecloth, every time you close the largest window, the window will always fall from top to bottom, slowly and slowly. If this happens, you must close the tablecloth! The method is: right click on the desktop, then press content, and then click & quot; Background & quot; Select & quot; No & quot;, It is suggested that in & quot; Appearance & quot; In the dialog box, change the preset cyan color on the desktop to black...... As for closing active desktop, that is to say, you are asked to close the web screen on the desktop. For example, right-click on the desktop, then press content, and then click & quot; Background & quot; Dialog box, there is a tablecloth, named Windows 98, that is the web screen! So don't turn it on. As I said, cloth can only be described in four words, that is & quot; Beauty is in trouble
6. Delete some unnecessary font types
one of the reasons why the system runs slowly is the relationship between font types! The more fonts you install, the more memory you use, which slows down your computer! So we need to delete some unnecessary fonts. To delete some unnecessary fonts, you can go to the console and enter another one called & quot; Font & quot; However, how can we know which words are useful and which are not? For example, if you don't visit MS often_ DOS mode, then delete the DOS font! Because everyone may like a certain font, so I'm not sure I want to delete those font, but I have a secret here to teach you. If you have Huakang bold black font, and you have the new fine Ming font, I suggest you delete Huakang bold black font. If you have the new fine Ming font, and you have the new fine Ming font, you can delete the fine Ming font
7. Reorganize the hard disk regularly
the smallest unit in the computer hard disk is sector. A file usually occupies several sectors. Every time the hard disk is used for a long time, after countless times of adding, changing and deleting files, it will cause many intermittent sectors, so there will be more and more non continuous files, The hard disk head needs to spend more time hopping to read data, which leads to the slow down of the hard disk. In view of this, windows will have & quot; Reorganize disk & quot; appear. Just execute & quot; Reorganizing disks;, All the discontinuous files will be rearranged in a neat way. As for the execution time, about once a week is enough< There is a big data exchange file in the hard disk, which is reserved by the system for the temporary storage of the virtual memory. Many applications often use it, so the system often needs to access a large amount of data to the main memory, so the speed of accessing this file constitutes a very important factor affecting the speed of the computer! In general, Win98 is designed to manage the virtual memory by the system itself. It will automatically adjust the size of the swap file according to the needs of different programs. However, such a rection will bring extra burden to the system and slow down the operation of the system! In view of this, users had better set the minimum and maximum value of virtual memory to avoid changing the size frequently. To set the virtual memory, in & quot; My computer & quot; Right click in, and then press content to & quot; Efficiency & quot; In the dialog box, press & quot; Virtual memory;, Then select & quot; Let yourself set the virtual memory settings;, Set & quot; Minimum value & quot; 64, because my computer is 32MB ram, so I set it to 64, that is to say, if your memory is 64MB, then in & quot; Minimum value & quot; In this case, it is set to 128. By the way, in & quot; Efficiency & quot; Select & quot; Archives;, Set the & quot; Desktop computer;, Change to & quot; Network server;, It will speed up the operation of the system; Also, in & quot; Disk & quot; Do not select & quot; Search for a new disk drive every time you boot up;, It will speed up the startup< Although you already know how to add and remove some resident programs, do you know what the computer is doing from boot to Win98? Or, what program is being executed? Those programs must be fully loaded before they start to enter Win98. Have you ever thought that if you can delete some unnecessary startup programs, will the startup speed be accelerated? The answer is yes! To modify it, press & quot; Start & quot;, Select & quot; Execute & quot;, Then type in win.ini. After opening, you can delete the content of the following paragraphs. If you want to delete the content, don't even delete the title! They include: [compatibility], [compatibility 32], [timeliness], [compatibility 95], [molecule compatibility]< As we all know, if you want to remove some programs, you can go to & quot; Add / Remove Programs & quot; But do you know that it will only help you remove the program, not the registration code and some login items of the program? It's not that Win98 is stupid, but that it's not professional enough in this respect. To completely delete the program, we need to find some & quot; Major & quot; Remove software to remove it! Previously, Symantec's Norton universal (hereinafter referred to as NUD) has stopped selling all over the world because some parts of it have damaged the right of some deleted software. That's why Symantec came out with CleanSweep (hereinafter referred to as CS). However, in terms of function, NUD is better than CS! In fact, in addition to these two softwares, there are many similar softwares that can effectively remove programs. Since NUD is out of print, let me say CS. After downloading and installing, if you want to remove the program, just use CS to remove it, it will remove the login item and registration code of the program! I'm here to help you; Add / Remove Programs & quot; Changed an alias, that is & quot; Add garbage, remove program & quot;! Garbage refers to the abandoned login project and registration code, the program is the program
do well in the above ten points, and I believe your love plane is already flying fast. Of course, if it's still very slow, you should consider upgrading the hardware.
8. In summary, there are the following situations when the computer crashes:
① the voltage fluctuation is too large, causing the current on the board or card to be large or small, sometimes damaging the hardware. Therefore, it is very important to choose a power supply that can play the role of overvoltage protection, or install a voltage regulator
② the board and card are in poor contact or loose, or the slot, display card, memory and other accessories on the board are damaged
③ if the frequency is too high, the display will not light up or it will crash after entering the system, or even the CPU will burn out
④ the printer, recorder, scanner and other external devices are damaged, but the plug and play technology makes the system still detect these devices at startup, resulting in a crash
⑤ the display is damaged or the signal wire of the display is not well contacted, and the power supply of the display is not plugged in< (6) running software conflicts with each other, such as 16 bit and 32-bit software running at the same time may cause crash< (7) the running speed of the machine is too slow, resulting in a false crash< (8) windows 95 and windows 98 systems need to use part of the hard disk as virtual memory. If the remaining space of the hard disk is too small, it will cause a crash< The DLL of the linked file in the system subdirectory is lost, which causes the windows system to be paralyzed< (10) the registry information of the system was modified in error, resulting in the failure of windows system startup< (11) when surfing the Internet, hackers break in
12. The damage of virus leads to crash.
① the voltage fluctuation is too large, causing the current on the board or card to be large or small, sometimes damaging the hardware. Therefore, it is very important to choose a power supply that can play the role of overvoltage protection, or install a voltage regulator
② the board and card are in poor contact or loose, or the slot, display card, memory and other accessories on the board are damaged
③ if the frequency is too high, the display will not light up or it will crash after entering the system, or even the CPU will burn out
④ the printer, recorder, scanner and other external devices are damaged, but the plug and play technology makes the system still detect these devices at startup, resulting in a crash
⑤ the display is damaged or the signal wire of the display is not well contacted, and the power supply of the display is not plugged in< (6) running software conflicts with each other, such as 16 bit and 32-bit software running at the same time may cause crash< (7) the running speed of the machine is too slow, resulting in a false crash< (8) windows 95 and windows 98 systems need to use part of the hard disk as virtual memory. If the remaining space of the hard disk is too small, it will cause a crash< The DLL of the linked file in the system subdirectory is lost, which causes the windows system to be paralyzed< (10) the registry information of the system was modified in error, resulting in the failure of windows system startup< (11) when surfing the Internet, hackers break in
12. The damage of virus leads to crash.
9. Crash, as the name suggests, means that the computer is dead, that is, it stops responding to everything.
the causes are as follows:
1, fan
2, virus
3, hardware instability
the causes are as follows:
1, fan
2, virus
3, hardware instability
Hot content