10808g power supply of mining machine
Publish: 2021-05-08 08:19:57
1. If the power supply is broken, replace it directly. It must be because the power supply is broken, the output current is unstable or the output current is unstable. The function of the power supply is to convert alternating current into direct current. Half of it is not repaired, and it is not expensive. Just buy a new one
2.
-
Yingtai tb250-btc D + miner motherboard + 8 graphics cards, 1300W power output is recommended
-
if the power supply is insufficient, it will cause the phenomenon that the power on point is not bright and the fan is running wildly, and the external power supply on the graphics card needs to be fully connected< br />
3. It depends on the power consumption superposition of the specific graphics card. The power supply is not always full output, but according to the demand. Now the 1080 single card is 180W, with six 100% running, it is 1080W, plus the power consumption superposition of other hardware. But I've only heard that the demand for password cracking machines is so high. I can't see such machines.
4. 1、 There is an oil indicator cover on the top of the instrial lock. Just screw it down and fill oil directly. Then there is an oil indicator window in front. The oil level should not exceed the second oil level line< (1) always refuel
all oil holes on the machine and all rotating parts should be refueled with clean sewing machine oil every 4 hours. Other oils and unclean sewing machine oil should not be used, so as not to affect the service life of the machine
(2) regular maintenance and inspection
it is necessary to keep the parts clean, regularly check whether the temperature and sound of the rotating parts are normal, and repair them immediately if any problems are found, so as to avoid damaging the machine
generally, minor overhaul is concted once a month, and cleaning and major overhaul are concted once a half year. After being put into use for a long time, it should be cleaned and overhauled first
the thickness and use speed of the sewing material should be selected within the specified range, and it should not be overloaded or over speed.
all oil holes on the machine and all rotating parts should be refueled with clean sewing machine oil every 4 hours. Other oils and unclean sewing machine oil should not be used, so as not to affect the service life of the machine
(2) regular maintenance and inspection
it is necessary to keep the parts clean, regularly check whether the temperature and sound of the rotating parts are normal, and repair them immediately if any problems are found, so as to avoid damaging the machine
generally, minor overhaul is concted once a month, and cleaning and major overhaul are concted once a half year. After being put into use for a long time, it should be cleaned and overhauled first
the thickness and use speed of the sewing material should be selected within the specified range, and it should not be overloaded or over speed.
5. Is it one of the following games, StarCraft, red alert, Warcraft, Empire
6. Now bitcoin is out of business. The risk is high
7. Unknown_Error
8. Take a look at this beautiful picture. The miner hates the cloth_ I want that skirt
9. When you know this skill, go to Shanlin mine and press K to drag the skill to the quick cut key above. Just press on the ore to pick things```
Hot content