Wiring course of Baka mining machine
First of all, there is a special motherboard for mining machine, which can support multiple USB expansion cards. These graphics cards can be transferred by USB interface, and more than 100 graphics cards can be connected. In addition, as long as the home motherboard provides more than 4 pci-e1x slots, it can also use the adapter to connect more than 4 graphics cards. When mining, the requirement for data bandwidth is not high, so 16x bandwidth is not necessary
-
Yingtai tb250-btc D + miner motherboard + 8 graphics cards, 1300W power output is recommended
-
if the power supply is insufficient, it will cause the phenomenon that the power on point is not bright and the fan is running wildly, and the external power supply on the graphics card needs to be fully connected< br />
all oil holes on the machine and all rotating parts should be refueled with clean sewing machine oil every 4 hours. Other oils and unclean sewing machine oil should not be used, so as not to affect the service life of the machine
(2) regular maintenance and inspection
it is necessary to keep the parts clean, regularly check whether the temperature and sound of the rotating parts are normal, and repair them immediately if any problems are found, so as to avoid damaging the machine
generally, minor overhaul is concted once a month, and cleaning and major overhaul are concted once a half year. After being put into use for a long time, it should be cleaned and overhauled first
the thickness and use speed of the sewing material should be selected within the specified range, and it should not be overloaded or over speed.
2, the graphics card can be used for calculation, so it is generally indispensable in mining, and the amount of graphics card is quite large
in short, as long as the supply of graphics cards exceeds the demand, the price of graphics cards will come down. Just wait a minute