Where is the maintenance department of Chengdu graphics card min

1. 1. mining damage cannot be guaranteed
2. If the video card is used as a special test purpose, the proct is abnormal or damaged e to the over frequency of the core and memory of the video card (for example, if the core and memory of the video card are damaged e to mining and debugging, the warranty is 3 months, and it is only repaired but not replaced and not returned within 3 months from the date of shipment)

2. When installing the disc feeder, the user should first install the main bearing. In order to avoid aggravating the wear between the shoulder of the hollow journal and the bearing liner, the elevation difference of the base plate of the two main bearings should be kept within 0.25 mm per meter. Secondly, install the barrel of the grinding machine. According to the specific conditions, the pre assembled whole barrel can be directly installed, or it can be installed in several parts. The journal and the center line of the grinding machine should be checked and adjusted. The concentric error must be less than 0.25m per meter of length. After the installation of transmission parts (pinion, shaft coupling, recer, motor, etc.). In the process of installation, measurement and adjustment should be carried out according to the proct technical standards. Check the radial runout of the ring gear and the meshing performance of the pinion; Concentricity of recer and pinion; And the concentricity of motor and recer. When all the installation standards meet the requirements, the foundation bolts can be tightened and the main bearing base plate can be poured
before the installation of the disc feeder, it is necessary to check the foundation position and geometric size according to the parameter table, and make sure there is no error before the installation. The oil, gravel, soil and water on the surface of the equipment foundation and in the reserved hole of the anchor bolt shall be removed. The thread and nut of the embedded anchor bolt shall be protected, and the surface of the place where the pad iron is placed shall be chiseled flat. Make corresponding records after unpacking inspection and acceptance of equipment parts. The installation shall be carried out according to the proct manual. During the installation, the position shall be found according to the center of the silo, and the deviation of the center distance shall not exceed 5mm; The disc must be in a horizontal position with a deviation of not more than 0.5/1000. Then, the channel steel column is fixed at the lower part of the silo, and the feeding pipe is connected with the screw brake; Turn the V-belt by hand to check whether it operates flexibly; Check the lubricating height in the turbine recer and inject proper amount of lubricating oil into the lubricating points
before the disc feeder equipment is put into proction, the necessary training should be given to the operators to make them master the correct operation process. Only in this way can the service life of the equipment be prolonged and the proction capacity of the equipment be improved. So what is the specific operation process
1. Employees can only operate the equipment after wearing relevant protective equipment It is very necessary, many accidents are e to the lack of protection for personnel)
2. Before starting the machine, check whether the disc is in the horizontal position, and use hand turning to check the operation flexibility
3. Add lubricating oil before starting. At this time, check the rotation direction of the disc to make sure that the motor wiring is correct
4. Check for periodic noise and oil leakage
5. Check the temperature rise of bearing and lubricating oil to make sure it is within the normal range
6. Check the position of scraper and movable sleeve before operation
7. During operation, the spiral gate should be opened after the disc transmission is stable, and the spiral gate should be closed before stopping
8. Always check the lubrication, bearing operation and temperature rise of each part. If there is overheating, it should be eliminated immediately. If necessary, it should be stopped for treatment
9. During long-term operation, the wear of scraper, movable sleeve, disc worm gear, worm, V-belt and seal should be inspected regularly for timely adjustment, maintenance or replacement. Adjustment, repair and other operations are not allowed when the equipment is in operation
10. Clean the equipment and the surrounding area before each shift
lubrication of disc feeder
firstly, thin oil splash lubrication should be used for disc feeder, and the lubricating oil should be determined comprehensively according to the place of use and air temperature conditions, generally gear oil can be used
secondly, ensure that the oil level in the exciter is higher than the oil level (it can be filled through the joint and elbow), and replace it every 3 to 6 months. Pay attention to clean gasoline or kerosene to clean the oil tank, bearing raceway and gear surface when changing the oil
in addition, other vulnerable and easily worn parts should be cleaned and lubricated in time to prevent the wear from affecting the work of the equipment and rece the proction cost.

3. Vidy money can be used to buy goods with one click when we watch the advertisement on the page, and can also be exchanged for legal money at the exchange. Vidy has been launched on the first tier exchanges such as fire coin, gate and Matcha. If it can be launched on the trading platform such as fire coin, it can be seen that this Vidy coin is of high quality. Due to the obvious technical advantages and strong investment background of Vidy project, the value support of Vidy currency is very strong.

4. If you enter 1, you will see what you think. 2 adds a lot of new mechanisms on the basis of 1, such as a new card, and then changes the identity to make the identity more diversified. However, if you say it, it may not be very different from 1

if you enter 1 and are very interested, it's still worth entering 2. If you enter 1 and have no interest at all, you won't play anything again What do you mean by that?

Jack's words, the New York version is more balanced, and the original jack detective has a high winning rate. Personally, I prefer the original jack (because the belt extension is more diversified, and then it will be more pleasant to win with Jack...) But more people like New York, so I recommend New York

5.

1. This game needs 3-10 players, a game takes about 30 minutes, generally the best player is over 8 years old

The cards of board game are divided into path card, action card, nugget card and dwarf card. The number of players determines the number of dwarves and obstructionists

3-player game: 1-player hinders 3 dwarfs

4-player game: 1-player hinders 4 dwarfs

5-player game: 2-player hinders 4 dwarfs

6-player game: 2-player hinders 5 dwarfs

7-player game: 3-player hinders 5 dwarfs

8-player game: 3-player hinders 6 dwarfs

9-player game: 3-player hinders 7 Dwarfs

10 player game: use all character cards

3, at the beginning of the game, Prepare appropriate dwarf cards, wash them well, and give each player one card. You can't reveal each other's identities. The mine pits are generally arranged in 5 rows * 9 columns

4. Wash the gold card evenly and put it aside. Then put the remaining path cards and action cards together and wash them well, and then send them to all players. The remaining cards are used as the library

3-5 player games: each player issues 6 cards

6-7 player games: each player issues 5 cards

8-10 player games: each player issues 4 cards

5. Each player takes turns to play cards. When it's their turn to play, they can choose:

1. Add a path card in the mine

2. Place an action card in front of each player

3 discard cards, Put a card face down in the discard pile

6. Once the cards in the library are drawn, the player can't draw any more cards. Starting from the starting point card, the road should be connected with the road, only the long side can be connected with the long side, and each card must be connected with the previous card, the interface is completely consistent, the empty side does not matter

7. Finally, when the card is connected to the end point, open the end point card facing down. If it is a gold nugget pattern, the game will end and the dwarf will win

6. Board game introction board game: dwarven gold mine posted by: admin at: 2011-4-11 22:37:14 font size: small, medium and large Tags: board game dwarven gold mine<

dwarf gold mine high quality and high imitation purchase address:

basic information of dwarf gold mine
number of players: 3-10
player age: over 8 years old
game time: about 30 minutes

Introction to dwarf gold mine game
black and white between good dwarf and bad dwarf, are you good dwarf or bad dwarf? In order to dig a gold mine full of attraction, the good dwarves and the bad dwarves need to cooperate with each other in their respective teams: the goal of the good dwarves is to extend the mining road to the gold mine, while the goal of the bad dwarves is to destroy it; At the same time, for extra rewards, there is also the possibility of breaking the bridge within the team, and there is also the possibility of internal suspicion and struggle between good dwarves
in the fight between dwarves, all kinds of function cards should be used wisely. Some give way to continue, some play obstacles not to let the other party action, or remove obstacles card, and can peek at the destination map card. In the end, all the cards are touched and all the cards are played. If the good man's road is not connected to the destination with gold, the bad man wins

basic rules of dwarf gold mine game
before the board game starts, separate the cards according to the path card, action card, nugget card and dwarf card. The number of bad seeds and gold diggers is determined by the number of players<

three player game: 1 bad embryo and 3 good dwarfs

four player game: 1 bad embryo and 4 good dwarfs

five player game: 2 bad embryo and 4 good dwarfs

six player game: 2 bad embryo and 5 good dwarfs

seven player game: 3 bad embryo and 5 good dwarfs

eight player game: 3 bad embryo and 6 good dwarfs

Nine person game: 3 bad kids and 7 good dwarfs

ten person game: use all dwarfs cards

prepare appropriate dwarfs cards, wash them well and send them to each player. You can't let other players know who you are

the size of the mine is 5 * 9:

{}}}}}}} {}}}} {}}} {}}}}} {}}} {}} {}}} {}}} {}}}}} {}}}} {}}}}} {}}}}}} {}}} {}}}}} {}}}}}}}} {}}}} {}}}}}}}}}} {}}}}} By the side

next, put the remaining path cards and action cards together and wash them well, then send them to each player, and the remaining cards are used as the library

three to five player game: 6 cards for each player

six to seven player game: 5 cards for each player

eight to ten player game: 4 cards for each player

the way of board game is that each player takes turns to play cards. When it's your turn, you can choose:

1. Add a path card to the pit

2. Place an action card in front of a player

3. Discard a card and put it face down in the discard pile (there will be face up and face down cards in the discard pile)

once the cards in the library are drawn, the player will not draw any more cards. The way to add the path card is the same as kakasung, extending from the starting point card. The road should be connected with the road, only the long side can be connected with the long side, and each card must match the interface of the connecting side of the previous card, and the empty side doesn't matter

good dwarfs must find a way to connect them into a road to the end

when the card is connected to the terminal, open the terminal card facing down. If it is a gold nugget pattern, the game is over, and the good dwarf wins. If the players have no cards to play, the bad player wins

using action cards is like bang! Generally, the card can be hit in front of the player

Introction to dwarf miner action card. In front of the same player, only one obstacle can be placed

2. Carry the lamp, cart, t-pick tool card, and recover the corresponding obstacles. Some cards are printed with two kinds of tools at the same time, which means that it can restore one of the obstacles. One tool card can only restore one obstacle card, even if two tools are printed on it

3. Collapse card. Players who use this card can cut off a path card except the starting point and the ending point

4. Map card. Players using this card can peek at a destination card, but it can't be made public

the above information is provided by the board game chronicle.

7. Not bad, I like it!

8. Bus route: 333 Institute of physical ecation branch line, the whole journey is about 5.2km
1. Walk about 140m from the Olympic Sports Center to Xinhua news agency Station
2. Take 333 Institute of physical ecation branch line, after 6 stops, to Diwang International Garden Station (you can also take No. 333 or no. 126)
3. Walk about 210m to Wuai street

9.

bus line: 333 Institute of physical ecation branch line, the whole journey is about 5.2km

1. Walk about 140m from the Olympic Sports Center to Xinhua news agency Station

2. Take 333 Institute of physical ecation branch line, after 6 stops, to Diwang International Garden Station (also take No. 333 or no. 126)

3. Walk about 210m to Wuai street

10. Bus route: No.109, about 3.9km

1. Walk about 890m from the Olympic Sports Center to Xinhua news agency Station

2. Take No.109, pass by 2 stops, and then reach Xiagong station (or take No.214, 333, 272, 286, 126)

3. Walk about 950m to Wuai street