How to connect mining machine to wireless network
Publish: 2021-05-11 23:30:07
1. Before connecting the ore pool, we need to know the IP of the ore machine. Through the miner IP to login settings. The IP acquisition methods of different mining machines are different. Ant miner can download ipreport.
2. As long as you can connect to the Internet, you can dig bitcoin. It's not about wired or wireless, it's only about the configuration of the computer and the network. You'd better play games when your home computer has 4 megabytes of network speed. Now bitcoin needs to buy a specific mining machine to dig.
3. 1. Miner path setting: to link the server of the mine pool
2. Miner name setting format: Mining account number miner number:
if the mining account number is Adrian, multiple miners can be set as Adrian, Adrian... And so on, miners will be arranged in the order of number. Password: you can not fill in or enter at will
3. Mining machine link configuration: get the IP address of the mining machine, log in the same LAN to access the IP address, and then visit the mining machine background to set the mining machine.
2. Miner name setting format: Mining account number miner number:
if the mining account number is Adrian, multiple miners can be set as Adrian, Adrian... And so on, miners will be arranged in the order of number. Password: you can not fill in or enter at will
3. Mining machine link configuration: get the IP address of the mining machine, log in the same LAN to access the IP address, and then visit the mining machine background to set the mining machine.
4. Avalon team has developed the world's first "variable computing power cluster system" (hashs for short, hyper array scalable hashing
System). In this system, the concept of single miner no longer exists, but the concept of mole cluster
taking Avalon 40 nm mole as an example, each mole has 295g computing power. According to the actual situation of the mine site, power supply and heat dissipation, users can freely choose to stack 1-40 moles (corresponding to about 0.3t-12t computing power) into a computing power cluster unit, which can be controlled by one terminal, one network cable and one IP address. Revolutionary technological innovation has raised the flexibility and simplicity of mine layout to an unprecedented level.
System). In this system, the concept of single miner no longer exists, but the concept of mole cluster
taking Avalon 40 nm mole as an example, each mole has 295g computing power. According to the actual situation of the mine site, power supply and heat dissipation, users can freely choose to stack 1-40 moles (corresponding to about 0.3t-12t computing power) into a computing power cluster unit, which can be controlled by one terminal, one network cable and one IP address. Revolutionary technological innovation has raised the flexibility and simplicity of mine layout to an unprecedented level.
5. 1
if all the cables are connected, we can turn on any connected PC at this time. Turn on the network neighborhood property
2
and then turn on the local connection property
3
and then turn on the TCP / IP protocol property
if all the cables are connected, we can turn on any connected PC at this time. Turn on the network neighborhood property
2
and then turn on the local connection property
3
and then turn on the TCP / IP protocol property
6. Just insert it according to the color of the thread
7. First of all, park the excavator in a flat place, and it is better to stop overnight, and then start to change the oil the next morning, but do not start the excavator. The advantage of these two points is that the waste oil can be discharged more thoroughly
to change the oil is to remove the screw from the engine oil pan and catch it with a bucket (waste oil can be sold for money). At the same time, you can remove the oil filter. After removing the general oil filter, you can install a new one. There's no need to wait. Just use a paper towel to clean the waste oil on it. It's not necessary to use too much force when installing, so as not to crack tightly. Generally, after the new filter is installed, the engine will be used for one day, and the filter will be tighter after high temperature. When you see that there is no waste oil dripping from the oil drain hole below, you can add new oil. Before adding new oil, you can also add a little to remove the remaining waste oil from the oil pan (almost all engines are difficult to drain all the waste oil at one time). But you can also add all the new oil directly
when adding new oil, you must check the dipstick while adding it, so as not to add too much oil. When you see that the oil has reached the upper end of the dipstick mark, you can generally start the engine. Remember not to use the oil filling door, let it run at a low speed for one minute, and then turn off the engine. After every 30 seconds, when you go to check the oil, the oil is generally a little less than before, Because part of the oil is in the new oil filter, you must add a little oil until the oil reaches the upper end of the dipstick mark. After changing the engine oil, remember to check if there is any oil leakage at the place you just removed. It's better to clean the engine with some water. The water is better not to face the generator and motor to avoid short circuit.
to change the oil is to remove the screw from the engine oil pan and catch it with a bucket (waste oil can be sold for money). At the same time, you can remove the oil filter. After removing the general oil filter, you can install a new one. There's no need to wait. Just use a paper towel to clean the waste oil on it. It's not necessary to use too much force when installing, so as not to crack tightly. Generally, after the new filter is installed, the engine will be used for one day, and the filter will be tighter after high temperature. When you see that there is no waste oil dripping from the oil drain hole below, you can add new oil. Before adding new oil, you can also add a little to remove the remaining waste oil from the oil pan (almost all engines are difficult to drain all the waste oil at one time). But you can also add all the new oil directly
when adding new oil, you must check the dipstick while adding it, so as not to add too much oil. When you see that the oil has reached the upper end of the dipstick mark, you can generally start the engine. Remember not to use the oil filling door, let it run at a low speed for one minute, and then turn off the engine. After every 30 seconds, when you go to check the oil, the oil is generally a little less than before, Because part of the oil is in the new oil filter, you must add a little oil until the oil reaches the upper end of the dipstick mark. After changing the engine oil, remember to check if there is any oil leakage at the place you just removed. It's better to clean the engine with some water. The water is better not to face the generator and motor to avoid short circuit.
8.
Bitcoin's overall market is not optimistic, continuing the stagnant or even backward market in 2014. The price of bitcoin once fell below the 1000 yuan mark and soared to 3000 yuan when hot money entered. The stock market fell sharply some time ago. It is possible that the price of bitcoin once exceeded the 2000 yuan mark e to the transfer of some stock market funds to the currency market. At present, the price of bitcoin hovers around 1500 yuan, Here is the K-line chart of bitcoin price since 2015:
9. Litai is a professional graphics card, used for graphics rendering and design professional graphics card, use it is the IT instry!
10. I'm usually in halo assistant
Hot content