The miner always loses its graphics card
Publish: 2021-05-12 15:50:47
1. The main reason is that the quality of the graphics card can not be guaranteed
for mining, all mining machines do not shut down for several months. And the graphics card is always full of work, there is no time to rest
some of them are still used in overclocking mode, which is much more intensive than the personal home graphics card used for several years.
for mining, all mining machines do not shut down for several months. And the graphics card is always full of work, there is no time to rest
some of them are still used in overclocking mode, which is much more intensive than the personal home graphics card used for several years.
2. Generally speaking, press the three keys of Ctrl + Alt + delete
the specific operation methods are as follows:
1. Judge that the machine is in a dead state. The way to change the state is to press the NumLock key to see if the num light will change the state with the pressing of the key. If it doesn't change, it will be in a crash state
2. If the machine is in a dead state, press the CTRL and ALT keys with your left hand, and then press the delete key with your right hand while keeping pressing
3. The system will restart.
the specific operation methods are as follows:
1. Judge that the machine is in a dead state. The way to change the state is to press the NumLock key to see if the num light will change the state with the pressing of the key. If it doesn't change, it will be in a crash state
2. If the machine is in a dead state, press the CTRL and ALT keys with your left hand, and then press the delete key with your right hand while keeping pressing
3. The system will restart.
3. This is very necessary, installed a good graphics card without driver will greatly rece the performance of the graphics card
excessive overclocking
e to the use of components with higher technical parameters, some graphics cards have excellent overclocking capability, so many players advocate overclocking graphics cards to improve performance. However, there are both advantages and disadvantages. Overclocking can also lead to a significant increase in the heat of the chip. When it reaches a certain level, it will cause the problem of splash screen and crash. Even if not, it will also cause instability in some applications, such as games. Therefore, overclocking must be moderate. 4
al card technology
excessive overclocking
e to the use of components with higher technical parameters, some graphics cards have excellent overclocking capability, so many players advocate overclocking graphics cards to improve performance. However, there are both advantages and disadvantages. Overclocking can also lead to a significant increase in the heat of the chip. When it reaches a certain level, it will cause the problem of splash screen and crash. Even if not, it will also cause instability in some applications, such as games. Therefore, overclocking must be moderate. 4
al card technology
4. 1、 There is an oil indicator cover on the top of the instrial lock. Just screw it down and fill oil directly. Then there is an oil indicator window in front. The oil level should not exceed the second oil level line< (1) always refuel
all oil holes on the machine and all rotating parts should be refueled with clean sewing machine oil every 4 hours. Other oils and unclean sewing machine oil should not be used, so as not to affect the service life of the machine
(2) regular maintenance and inspection
it is necessary to keep the parts clean, regularly check whether the temperature and sound of the rotating parts are normal, and repair them immediately if any problems are found, so as to avoid damaging the machine
generally, minor overhaul is concted once a month, and cleaning and major overhaul are concted once a half year. After being put into use for a long time, it should be cleaned and overhauled first
the thickness and use speed of the sewing material should be selected within the specified range, and it should not be overloaded or over speed.
all oil holes on the machine and all rotating parts should be refueled with clean sewing machine oil every 4 hours. Other oils and unclean sewing machine oil should not be used, so as not to affect the service life of the machine
(2) regular maintenance and inspection
it is necessary to keep the parts clean, regularly check whether the temperature and sound of the rotating parts are normal, and repair them immediately if any problems are found, so as to avoid damaging the machine
generally, minor overhaul is concted once a month, and cleaning and major overhaul are concted once a half year. After being put into use for a long time, it should be cleaned and overhauled first
the thickness and use speed of the sewing material should be selected within the specified range, and it should not be overloaded or over speed.
5. I think the power supply is small. Are you six of the same graphics cards? According to the full load of 350W, six power sources should be more than 2000W. Crash is a sign of insufficient power.
6. 1. Is the graphics card driver always out? It may be caused by the incomplete installed driver file itself or the incompatibility between the driver file and the system
2, if you are playing games, frame suck, it may be insufficient memory or CPU not to force, additional resources occupy too much, the game unnecessary background proceres closed.
2, if you are playing games, frame suck, it may be insufficient memory or CPU not to force, additional resources occupy too much, the game unnecessary background proceres closed.
7. Take a look at whether the area where the computer is placed is very wet, or monitor whether the computer is working under high load every day. If there is no such situation, it is a proct quality problem.
Hot content