Washing mill
centrifuge: centrifuge copper powder to get small piles of gold powder and nickel powder; The ruby powder and mercury unit were obtained by centrifuging the ruby; Helium unit and rutile were obtained by centrifuging fluorite, nickel and copper were obtained by centrifuging gold powder
the difference between the two:
1. The latter consumes more electric ore washing machine. In short, it uses water to clean the crushed ore to proce pure powder (Elemental) and impurities (also elemental minerals)
2. The former needs water to proce pure ore powder and impurities
my world instry is an open game, which can use very simple materials to make many strange modern works, such as using the most natural rubber to make batteries and other instries.
The motor of ore crusher drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feeding port and crushed by the impact, shearing and grinding of the hammer moving at a high speed. The device can adjust the gap between castor bars according to the user's requirements and change the discharging particle size to meet the different needs of different users. It has the characteristics of simple structure, large crushing ratio and high proction efficiency. It can be used for dry and wet crushing. The main working part of the machine is the rotor with hammer (also known as hammer head). The rotor consists of spindle, disc, pin and hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the crushing cavity from the upper feeding port, and is crushed by the impact, impact, shearing and grinding of the high-speed hammer. In the lower part of the rotor, there is a sieve plate. The stone particles smaller than the size of the sieve hole are discharged through the sieve plate, and the coarse particles larger than the size of the sieve hole are kept on the sieve plate and continue to be hit and ground by the hammer, and finally discharged out of the machine through the sieve plate
What are the specific equipment specifications or proction requirements
the price is based on your needs.
North heavy instry Shenkuang group
Shanghai Jianshe Road and Bridge Machinery Equipment Co., Ltd.
Xuzhou Wanhe Machinery Manufacturing Co., Ltd.
Luoyang Dahua Heavy Machinery Co., Ltd.
shaorui Heavy Instry Co., Ltd.
Shenye group
in fact, there are many more, But the more famous ones I know and recommended are these
The daily cleaning and cleaning of the universal pulverizer are carried out by the pulverizer operator, technologist and workshop director in the workshop, and the operation methods are as follows:
1. The universal pulverizer is directly in contact with drugs, and its cleaning degree directly affects the quality of drugs, so it should be thoroughly cleaned after proction
At the end of proction, turn off the power and send all the materials in proction to the intermediate station according to the material in and out procere3
Turn on the pulverizer and move the receiving bag, screen and detachable air ct into the water tank of the cleaning room Inject about 2 / 3 volume of 30 ~ 40 ℃ warm water into the water tank, soak for 10-30min, and then wash the front and back sides of the bag with running water repeatedly until the bag is clean; The screen and air ct are washed with a soft brush to make the water clear. Rinse with ionic water three times. Dry in the same level clean area as the crushing room for standby The material inlet, inner chamber, material outlet and powder collecting room of the pulverizer were wiped repeatedly with clean special cloth dipped with warm water until they were clean The inner wall of pulverizer, powder conveying pipe and cyclone separator were thoroughly cleaned by deionization Dry the above parts with clean dry towel, and then wipe them with 75% ethanol Clean the floor, power distribution cabinet, motor and operation cabinet of the operation room After the cloth bag and screen are dry, install all parts of the grinder in the reverse order of disassembly There was no st or water on the ground of cleaning and flushing operation room12. Fill in the clearance record
disassembly principle of universal pulverizer: from top to bottom, from outside to inside, the following details the steps of disassembly of universal pulverizer in the cleaning process:
1. Cleaning
turn off the main power supply of the pulverizer, and use the wool brush to clean the resial st in the pulverizer layer by layer from top to bottom
2. Remove the hopper
remove the four bolts of the hopper base, remove the hopper, and place the removed bolts and the hopper in the specified position
3. Remove the screen
open the door of the crusher and take out the screen
Remove the movable gearfix the movable gear with a wrench, loosen the fastening nut of the movable gear with a spanner, install the special tool for removing the movable gear, and use the spanner to install the special tool to separate the movable gear from the main shaft; Take down the movable gear and place it safely. Pay attention to safety ring operation and don't hurt your fingers