Mobile version of mine monitoring

In order to connect the monitor with mobile phone, the following two conditions must be met first:

1. The monitor is normally connected and can display video

the specific steps are as follows:

1. Download and install the mobile app "fluorite cloud video"

9. After the above steps are completed, you can use your mobile phone to watch the monitoring

extended data:

remote monitoring website settings of Hikvision:

1. First of all, there should be a router in the network

(1) correct network configuration needs to be established:
the default IP address of router is 192.168.1.1, and the default subnet mask is 255.255.255.0

(2) configure the IP address of the computer and the IP address of the hard disk video recorder. Just stay in the same network segment as the router

2. The IP address setting of the hard disk video recorder here will be slightly different according to different brands of hard disk video recorder, but as long as the address is configured correctly

(1) set the TCP / IP protocol of the computer to "automatically obtain IP address"

(2) turn off the router and computer. First open the router, and then start the computer, so that the built-in DHCP server in the router will automatically set the IP address for the computer

(3) fill in 192.168.1.108 for the address of the hard disk video recorder (for example, 108 here). As long as you connect with the router and install the software on the client's PC, you can access it in the LAN

3. In the LAN, write 192.168.1.108 as the address
and then click the user name, password and connect

Mobile connection monitoring