No display after the miner is installed and driven
Publish: 2021-04-15 02:20:01
1. What brand of dog do you use? Maybe the driver is not installed properly.
2. 1. In the USB interface to ensure that there is no problem, plug in the U disk and listen to the sound of the speaker. If there is no sound, the computer does not recognize that there is a USB device inserted, it may be the U disk is broken
2. If there is a sound, the USB device can be detected, which may be caused by system problems. You can operate as follows:
1) right click on computer, properties, device manager and disk manager
2) if there is a yellow exclamation mark, right-click it to unload it
3) if there is a disk marked with a black down arrow, it is disabled. Right click to start it. And then refresh or restart the computer, generally found
4) if there is no problem in the device manager, it is that the drive letter is not automatically assigned. Right click on the computer (or my computer), management, disk management. Find the partition you want to change, right-click it, select "change drive letter and path", then select "add", and assign a drive letter
if not, the USB flash disk is broken.
2. If there is a sound, the USB device can be detected, which may be caused by system problems. You can operate as follows:
1) right click on computer, properties, device manager and disk manager
2) if there is a yellow exclamation mark, right-click it to unload it
3) if there is a disk marked with a black down arrow, it is disabled. Right click to start it. And then refresh or restart the computer, generally found
4) if there is no problem in the device manager, it is that the drive letter is not automatically assigned. Right click on the computer (or my computer), management, disk management. Find the partition you want to change, right-click it, select "change drive letter and path", then select "add", and assign a drive letter
if not, the USB flash disk is broken.
3. Generally speaking, after the model is installed, you can find the setting panel of the corresponding graphics card in the start menu or in the control panel. If not, you can drive the graphics card through the driver wizard and update it again
4. The first step is to insert the USB flash disk into the computer to see if there is any response. If there is, you can try to repair it in a USB flash disk repair tool on the website, and then repair it. Or there are corresponding management items on the computer management tool that can be applied. The second step is to open disk management to see if there is a mobile hard disk
may be infected with Trojan horse!
may be infected with Trojan horse!
5. First of all, most mobile hard disk drives do not need to be installed. Most systems will automatically identify them. You can check the reasons from the following aspects:
1 check whether there is a problem with the relevant USB driver in the device manager. If there is one, reload the driver
2 it may be that the voltage is not enough. Some mobile hard disks have a power cord or a USB power cord. In this way, both USB ports need to be connected to the computer for power supply in order to work normally
3 replace a USB socket. If you still don't recognize it, use the exclusion method. Connect the mobile hard disk to someone else's computer
4 if you are sure that someone else's computer can use it, find out the reason from your computer to see if the USB port is broken, or to reload the system
5 if the mobile hard disk is not recognized, try to repair it yourself. Anyway, the hard disk is not expensive now. If it is physically damaged, just buy a new one
1 check whether there is a problem with the relevant USB driver in the device manager. If there is one, reload the driver
2 it may be that the voltage is not enough. Some mobile hard disks have a power cord or a USB power cord. In this way, both USB ports need to be connected to the computer for power supply in order to work normally
3 replace a USB socket. If you still don't recognize it, use the exclusion method. Connect the mobile hard disk to someone else's computer
4 if you are sure that someone else's computer can use it, find out the reason from your computer to see if the USB port is broken, or to reload the system
5 if the mobile hard disk is not recognized, try to repair it yourself. Anyway, the hard disk is not expensive now. If it is physically damaged, just buy a new one
6. Drive it with the motherboard driver
if you can't, use the driving spirit to drive your life and so on!!
if you can't, use the driving spirit to drive your life and so on!!
7. You said the computer does not display is the USB disk can not display it? Sometimes it is. Maybe 360 has set the USB disk to be disabled. Among them,
8. Solution:
first, enter the safe mode, uninstall the driver of the video card and sound card installed before (I think it is caused by the driver of the video card, try to uninstall the driver of the video card first), log in to windows normally, check whether it can display normally, if it still can't display normally, please see the second item< Second, there is no good way to solve all the problems by re installing the system (it takes about half an hour to re install the system, if it is ghost disk, it only takes more than 10 minutes)
suggestion: if you want to use the second item, please enter the safe mode, backup the important data (such as desktop, pictures in my documents) in Disk C to other disks, and then reload the system.
first, enter the safe mode, uninstall the driver of the video card and sound card installed before (I think it is caused by the driver of the video card, try to uninstall the driver of the video card first), log in to windows normally, check whether it can display normally, if it still can't display normally, please see the second item< Second, there is no good way to solve all the problems by re installing the system (it takes about half an hour to re install the system, if it is ghost disk, it only takes more than 10 minutes)
suggestion: if you want to use the second item, please enter the safe mode, backup the important data (such as desktop, pictures in my documents) in Disk C to other disks, and then reload the system.
9. USB connection is good, what does not prompt? There is no high beat meter is a driver free printer, and scanners need to be installed
10. Use the partition tool to partition the new disk again. Pay attention to dividing it into logical partitions. You are all the main partitions. How can you do
Hot content