Feeding car washing machine

1. The washing machine of medium coal mine car is composed of high pressure pump, high pressure spray gun, high pressure hose and nozzle. Flushing procere: manual operation of high-pressure spray gun to flush the deposit substrate of tramcar. 1. Connect the water inlet pipe, start the high-pressure cleaning machine, clean water enters the pump after filtering, and adjust the pressure regulating valve so that the pump outlet pressure is a reasonable value for the work. 2. Push the tramcar into the mper, select 45 degrees, the operator will put the high-pressure water gun into the tramcar, pull the high-pressure water gun, open the switch, the high-pressure water jet shoots at the bottom of the car, impact the substrate, make the substrate loose and peel off. 3. The car mper continued to work to remove the substrate from the car.

2. Kqy mine car cleaning machine is a special equipment designed for U-type mine car cleaning with low viscosity. It has the characteristics of simple structure, safe and reliable, convenient operation and no impact. It is a special equipment to improve the cleaning efficiency, rece the labor intensity of workers and realize the mechanization of mine car cleaning. The car cleaner is used to clean the bottom of the car. They all have the functions of high efficiency, thoroughness, labor-saving, time-saving, tramcar shaping, etc., and also avoid damaging the tramcar e to manual or pneumatic cleaning of the accumulated bottom. In particular, it can effectively improve the coal transportation capacity of coal mine. zmjt15

3. The tramcar cleaner, also known as gantry type hydraulic tramcar cleaner (qyq-1.1u, qyq-1.7u, qyq-2.2u), is suitable for cleaning the bottom sticking of 1.1 cubic tramcar, 1.7 cubic tramcar and 2.2 cubic tramcar with single track and track center distance greater than 1.25m; Cantilever type hydraulic car bottom cleaner, also known as hydraulic car cleaner (xyq-1.1u, xyq-1.7u, xyq-2.2u), is suitable for cleaning the bottom sticking of 1.1 cubic car, 1.7 cubic car and 2.2 cubic car with single track and double track with track center distance less than 1.25m. The mine car cleaning machine has the functions of high efficiency, thoroughness, labor saving, time saving, mine car shaping and so on. It also avoids damaging the mine car e to manual or pneumatic cleaning. Mine car cleaning machine, especially it can effectively improve the coal transportation capacity of coal mine
mine car cleaner model qyq-1.1u qyx-1.1u qyq-1.7u qyx-1.7u qyq-3.3u qyx-3.3u
motor model Y132M-4 y160m-4
power 7.5kw 11kw
voltage 380V / 660V
oil pump model cb-e320 cb-e325
displacement 20ml / R 25ml / R
pressure 16MPa
shovel plate volume ≥ 0.3m3 ≥ 0.4m3 ≥ 0.45m3
digging force ≥ 130kN ≥ 140kn ≥ 150kn
working min 4800 × one thousand and four hundred × 4100 3200 × one thousand and four hundred × 2800 5200 × one thousand and eight hundred × 4200 3900 × one thousand and eight hundred × 2900 6000 × one thousand and eight hundred × 4300 4600 × one thousand and eight hundred × 3000
Max 4800 × one thousand and four hundred × 5300 3200 × one thousand and four hundred × 3900 4800 × one thousand and eight hundred × 5400 3900 × one thousand and eight hundred × 4000 6000 × one thousand and eight hundred × 5500 4600 × one thousand and eight hundred × 4100zmkj001
number of foundations two foundations one foundation two foundations one foundation two foundations one foundation
Li Zhen 151 Zhen 5472 Bo 1833

4. Management measures for the use of storage battery locomotives and storage batteries

all units using locomotives in the mine: in order to strengthen management, standardize behavior and implement responsibilities, the management measures for the use of locomotives and storage batteries are hereby sent to you for implementation

I. management of battery locomotive usage

1. The number of empty and loaded trains shall not exceed each time, and RMB 30 will be fined for each overtaking

2. The tramcar in locomotive and empty and load train group can only reset on the track manually after getting off the track, and cannot use the locomotive to reset on the track forcibly, otherwise 50 yuan / time will be fined

3. Locomotive drivers and trackers must be relatively fixed and can not be replaced at will. All units must implement full-time drivers and trackers as soon as possible and report to mine safety office and proction dispatching room. In the future, if the tooth box gear of the locomotive is damaged, it must be identified by the mine safety office and the person in charge of mechanical and electrical technology. If the damage is caused by violation of regulations, all the following workers and drivers of the locomotive will be punished, 200 yuan each time

4. It is strictly forbidden to use reverse braking in normal operation of locomotive, otherwise the driver will be fined 50 yuan / time

5. Special bolt and guard rope must be used for lifting and releasing locomotive in underground inclined roadway. If it is found that the special bolt is not used, the penalty is 20 yuan / time; if the guard rope is not equipped, the penalty is 20 yuan / time; if the locomotive sports car accident is caused by bolt fracture, the penalty is 1000 yuan / time

2. Use management of locomotive battery:

1. Charging and removing the charging plug are carried out by the locomotive driver on ty, and the charging worker is responsible for the switching on and off of the charging power supply. If it is found that the locomotive goes out of the well and stops in the locomotive shed without charging - the power plug is not plugged in, the locomotive driver will be fined 20 yuan / time. If the power plug is inserted but the power switch is not closed, the charging worker will be fined 20 yuan / time

2. When charging the battery, the charger must open the vent cap. When the locomotive leaves the depot, the driver must put on the vent cap. Otherwise, the charger or driver on ty will be fined 10 yuan / time

3. Before charging the locomotive battery in the garage, the dirt on the battery surface must be washed with water. If it is found that the battery is dirty ring charging, the charger on ty will be fined 25 yuan / time

4. When the charging current plug is removed, it must be placed on the charging table, and it must not be thrown about, otherwise the driver will be fined 5 yuan / time

5. The replacement of storage battery is carried out by the locomotive driver and the driver. After the mine dispatching room gives the instruction to replace the battery, the unit will be fined 100 yuan / time.

5. The mine car cleaner is designed for U-type mine car cleaning with low viscosity by China coal. It has the characteristics of simple structure, safe and reliable, convenient operation and no impact. It is a special equipment to improve the efficiency of car cleaning, rece the labor intensity of workers and realize the mechanization of mine car cleaning. The car cleaner is used to clean the bottom of the car. They all have the functions of high efficiency, thoroughness, labor-saving, time-saving, tramcar shaping, etc., and can avoid damaging the tramcar e to manual or pneumatic cleaning. In particular, it can effectively improve the coal transportation capacity of coal mine.

6. The automatic washing car and the control box are started frequently. Well, please have a professional repair to avoid the risk

7. Gwzca mine general silicon rectifier charger | 2.5t, 5T, 8t, 12t mine general battery electric locomotive charger
1. The proct can charge the battery group of 2.5t, 5T, 8t, 12t mine electric locomotive
2. The structure of the proct is assembled with profiles, and there is a large gap between the upper and lower parts of the shell for air convection, so the heat dissipation effect is good;

8. About 6000

9.

How long does the tramcar run in the low-speed climbing state, and the torque requirements are very high, so the requirements for the engine and gearbox are very high. And the motor can provide very high torque at low speed, so as to avoid the problem of low speed and low torque of fuel engine, especially in the mining area with many potholes, the advantage is more obvious when driving at low speed and high torque for a long time. However, most of the tramcars of China coal group run 24 hours and consume a lot of electricity, so a generator set is installed on the car to cooperate with the use

If the internal combustion engine is used to drive, it should be equipped with the corresponding gearbox, etc. in this way, its weight will be increased, and the need to transport ore will greatly increase the fuel consumption. In contrast, using electric power to drive can rece the weight of the engine and the weight of the whole truck, and each wheel can be equipped with a special motor system, which can enhance the car's handling and power, and it is more convenient and fast to transport goods