OC miner
1. Before the installation of the seat type drawing machine, the on-site foundation shall be compared with the drawing of the drawing machine. After the inspection, the steel plate shall be embedded. The thickness of the steel plate shall be 20 mm and the flatness shall not be greater than 1.5%
2. After the ore drawing machine is installed, adjust the relative position, and then weld the spring base and the embedded steel plate by spot welding
3. It is required that the two vibrating motors must turn in the opposite direction
4. After installation and running for 1 hour, check whether the body runs smoothly, the yaw is not more than 0.5mm, and the bolt fastening of the vibration motor
5. If the handling capacity is not enough, the exciting force of the vibration motor can be adjusted to achieve the best effect if it is allowed
6. Adjustment of exciting force: A. remove the protective cover; B. loosen the two inner eccentric blocks; C. adjust the two outer eccentric blocks in the same phase and at the same angle; D. tighten the adjusting bolts and install the protective cover; e. the temperature rise of the vibration motor bearing shall not be greater than 80oC (resistance method)
7. During the operation of the ore drawing machine, attention should be paid to whether the movement of the machine body is stable. If abnormal operation or abnormal sound is found, the machine should be stopped immediately for inspection. 8. The bearing of vibration motor shall be lubricated with 3 # lithium grease once a week. The bearing shall be inspected and cleaned once a year to check the wear degree of the bearing. If necessary, it shall be replaced and repaired in time
9. The fastening bolts of the connection parts should be checked frequently to eliminate the hidden danger in time
2. The speed of rtx2080ti is far faster than p5000. In OC rendering, "game card of N card" is absolutely ahead of "professional card of the same price"
3. Public version ≠ professional card, professional card ≠ all design software majors (n-card professional card is also divided into Tesla, Quadro, etc.)
4. Combined with answer 1, if the budget is enough, priority should be given to those with more PCI-E channels (Xeon E5, Xeon W, Xeon gold / platinum, core i9, etc.). Amd Xiaolong, thread tearing)
* select the supreme version i9 or thread tearing, and the corresponding ATX motherboard itself supports 3 or 4-way graphics cards (x299, trx40)
* take Gigabyte x299-wu8 as an example: workstation motherboard supports 4-way SLI, and supports 4 (al slot cards) to run x16 / 16 / 16