Mine machinery route

1. You'd better describe your miner's hardware configuration, system architecture, operating system and other information, and find a suitable solution for you according to the relevant information.

2.

At present, the mining machines in the market are mainly divided into two categories, one is PC based mining machine, the other is professional mining machine based on ASIC chip

the general PC mining machine can be used as a home computer, but the CPU performance is weak and the power consumption is high. Professional mining machine based on ASIC chip can not be used as ordinary computer because it has no graphics card and does not support mainstream desktop operating system

extended data:

mining machine is one of the ways to obtain bitcoin is a kind of network virtual currency proced by open source P2P software. It doesn't rely on a specific currency institution to issue, but is generated by a large number of calculations of a specific algorithm. It uses a distributed database composed of many nodes in the whole P2P network to confirm and record all transactions economically. The decentralized nature of P2P and the algorithm itself can ensure that the currency value cannot be manipulated by mass proction

any computer can become a mining machine, but the profit will be relatively low, and there may not be one in ten years. Many companies have developed professional mining machines, which are equipped with special mining crystal. They are tens or hundreds of times higher than ordinary computers

mining is actually a competition of performance and equipment. The mining machine composed of many graphics cards, even if it is just a garbage card like hd6770, can surpass the single graphics card of most users in terms of computing power

and this is not the most terrible. Some mining machines are made up of more such graphics card arrays. When dozens or even hundreds of graphics cards come together, the graphics card itself costs money. Considering the hardware price and other costs, there are considerable expenses in mining

in addition to the display card burning machine, some ASIC (application specific integrated circuit) professional mining machines are also put into the battlefield. ASIC is specially designed for hash operation. Although the performance may not be able to kill the display card in seconds, it is already quite strong. Moreover, because their power consumption is far lower than that of the display card, it is easier to form scale and the electricity cost is also lower, It is difficult to compete with these excavators. And this kind of machine will be more expensive

3. For example, if the computing power of bitcoin increases by 25% every month, or the revenue of each miner decreases to 80% of last month, and you book a miner at the price of 10 bitcoin that you can get five months later, according to the current situation, the miner can dig four bitcoins every month and 20 in five months, which is enough to recover the cost of miner and even double the revenue. But in fact, your miner will arrive five months later. You can only dig 1.31 bitcoins in the month of arrival, and 1.05 bitcoins in the next month. Keep digging, and you'll get 6.55 bitcoins, which means you'll never get back the cost<

you need to have specific questions and algorithms to
change the bitcoin miner into a decryption device
. If these questions are not clear, they cannot be answered

5. If you want to dig a mine, you should understand these first, and then decide whether to join the army of miners or not
as a miner, I used graphics card very early and then butterfly machine. At present, I use Avalon's 220 miner and just received a new 180 ant miner. To tell you the truth, mining is not as simple as you think. Here I will list some practical difficulties you need to face in mining. If you find that some of these items can't be solved and overcome for the time being, don't rush to buy a miner, because from the moment you buy, if you can't mine, Then you will face a real loss

first, list the problems to face
1, be able to accept the noise - the noise of the mining machine is very loud, which is equivalent to that you put the air conditioner outside the room
1-1, strong hands-on ability - the noise can be controlled to a certain extent by adding water cooling, but it needs to be done by yourself. The installation process of water cooling is not as simple as the online tutorial. It needs to be extremely careful. The capacitor on the logic board is easy to touch, and it must be successful at one time. Once the refrigerant is added, the machine will have problems again, It would be disastrous to dismantle the water cooling system
1-2, conditional repair of the chip capacitor - in the process of water cooling installation, the capacitor is easy to fall off, these chip capacitors are very difficult to weld
2, you can set up the network - you can't just plug in the Internet cable! Need to understand the routing, know how to change the IP of the router, mining IP is fixed, according to mining IP to do settings
2-1, you can get a fixed IP address - if you are mining in a company, you can't set up a route, so you must have the condition to get a fixed IP, and then set up your own network through this IP
3. The environment of continuous power supply and continuous network - mining is a 24-hour business. Don't take it for granted that a meeting is OK in one day. Many companies will cut off power at midnight. This must be made clear
3-1. In low temperature environment, in addition to 24-hour continuous power supply, there should also be a relatively cold environment. In actual mining, we can clearly feel the importance of temperature for mining<

let's assume two scenarios,
in the company:
if your working environment is very quiet, it is not suitable, even if water cooling is installed. If you are a senior blue collar, in the workshop, do you have the conditions to set up the network and get a fixed IP? If you can't, give up
at home:
can you stand noise? Can tolerate to a certain extent
is it possible to install water cooling? It can be installed conditionally
is it possible to set up a network? There are also conditions to set up the network
is it warm in that room? Yes, but you can open windows on the second bedroom or balcony
is it possible to pull the wire and the wiring board in the balcony? No problem
congratulations, you can buy a miner to dig it up, but if one of them doesn't work, you need to think carefully before making a decision
the above-mentioned points should not be taken as unimportant or major problems. For example, it is necessary to have the conditions to install water cooling, for example, in a lower temperature environment, for example, to have a fixed IP
when the miner starts to operate and makes a rumbling sound, if you are in the company, you have to turn it off awkwardly. If you are at home, you need to figure out how to explain to your family or girlfriend that the noise will exist for 24 hours, and hope they don't mind

if your home is warm, your miner will never be able to achieve the highest computing power it can. You must accept it calmly, don't be depressed, it's useless to find the seller. Unless you open the window to let in the cold air, you will find that you and the miner are so out of place. That's why laomaozi is very fond of mining< Make complaints about mobile phone, br / > and if you work hard to move the mine to the company, you may think that the electricity charge is in the whole province. You can't get the mine to connect. Then you can only move the mine to home or sell it as a second-hand machine...

these words are typed word by word by me. I hope it can help you. You must find out whether you are qualified to do this at present. As for how to dig, it's a very simple thing: buy a miner, register an account on a mining website, Download a multibit to store the bitcoin you get, and link the miner to the network for power on, Set up the network, give it the fixed IP specified on the chassis, use the computer to access the IP, make some simple settings, and then wait for the receipt
what else can I ask you

6. 1
if all the cables are connected, we can turn on any connected PC at this time. Turn on the network neighborhood property
2
and then turn on the local connection property
3
and then turn on the TCP / IP protocol property

7. Just insert it according to the color of the thread

8. General replacement of the router is the need to reset
it is recommended that you check the settings in the replaced router
then set the new router to the same.

9. First of all, park the excavator in a flat place, and it is better to stop overnight, and then start to change the oil the next morning, but do not start the excavator. The advantage of these two points is that the waste oil can be discharged more thoroughly
to change the oil is to remove the screw from the engine oil pan and catch it with a bucket (waste oil can be sold for money). At the same time, you can remove the oil filter. After removing the general oil filter, you can install a new one. There's no need to wait. Just use a paper towel to clean the waste oil on it. It's not necessary to use too much force when installing, so as not to crack tightly. Generally, after the new filter is installed, the engine will be used for one day, and the filter will be tighter after high temperature. When you see that there is no waste oil dripping from the oil drain hole below, you can add new oil. Before adding new oil, you can also add a little to remove the remaining waste oil from the oil pan (almost all engines are difficult to drain all the waste oil at one time). But you can also add all the new oil directly
when adding new oil, you must check the dipstick while adding it, so as not to add too much oil. When you see that the oil has reached the upper end of the dipstick mark, you can generally start the engine. Remember not to use the oil filling door, let it run at a low speed for one minute, and then turn off the engine. After every 30 seconds, when you go to check the oil, the oil is generally a little less than before, Because part of the oil is in the new oil filter, you must add a little oil until the oil reaches the upper end of the dipstick mark. After changing the engine oil, remember to check if there is any oil leakage at the place you just removed. It's better to clean the engine with some water. The water is better not to face the generator and motor to avoid short circuit.

10. Look at my microblog. It talks a lot