Heat dissipation of multi truck miner

1. One is that when building the machine room, it is necessary to consider the density of the mining machine, the natural ventilation of the machine room, and the conditional installation of air conditioning or Jiafeng negative pressure fan.

3. Some mining machines can be equipped with water cooling, mainly to ensure that the operating environment ventilation, temperature is not higher than 40 degrees Celsius

4. Xinjiang bit continental machine room uses Jiafeng negative pressure fan to replace indoor hot air with outdoor cold air, and the effect is good.

5. In fact, not much harm, mainly equipment radiation, eat more anti radiation dishes. Of course, the radiation value should also be within the safe range, don't worry......

6. Not all mining machines are good at heat dissipation

7. Mining machine shell hot is abnormal, indicating that the environment is not good heat dissipation. Long time will shorten the life of the graphics card, after all, electronic components are required to work at ambient temperature. But it won't cause a fire. At most, it will burn the video card. If the miner takes the video card for temperature monitoring, if the temperature exceeds, it will alarm and shut down according to the setting for self-protection.

8. 1、 There is an oil indicator cover on the top of the instrial lock. Just screw it down and fill oil directly. Then there is an oil indicator window in front. The oil level should not exceed the second oil level line< (1) always refuel


all oil holes on the machine and all rotating parts should be refueled with clean sewing machine oil every 4 hours. Other oils and unclean sewing machine oil should not be used, so as not to affect the service life of the machine
(2) regular maintenance and inspection
it is necessary to keep the parts clean, regularly check whether the temperature and sound of the rotating parts are normal, and repair them immediately if any problems are found, so as to avoid damaging the machine
generally, minor overhaul is concted once a month, and cleaning and major overhaul are concted once a half year. After being put into use for a long time, it should be cleaned and overhauled first
the thickness and use speed of the sewing material should be selected within the specified range, and it should not be overloaded or over speed.

9. I don't know the specific subject you are doing, but the training samples are all selected according to the actual situation, and the training samples have a great impact on the training results
to give you an example, if you need to use neural network to judge whether the land on the satellite photo is desert or not, the training sample is to select some points from the remote sensing photo, and then manually interpret or field survey to get the training sample.