The temperature of Z11 is often abnormal

1.

Ant mining machine Z11 reference price is 7600, second-hand words may be relatively low, hand is also more difficult. Is specialized in ASIC mining, rated power consumption: 1418w (minimum), 1673w (maximum)

power consumption ratio: 25 ° C ambient temperature: 11.24j/ksol (maximum)
40 ℃ ambient temperature: 11.01j/ksol (minimum), 11.78j/ksol (maximum)

because the current ASIC mining currency is relatively low, so many do IPFs mining. IPFs mining hard disk has high value preservation, low power consumption and low power consumption< br />

2.

Possible reasons:

1. The installed mobile phone case does not match the mobile phone or is not installed in place, resulting in the power key stuck or squeezed, triggering the automatic restart mechanism of the mobile phone by pressing the power key for a long time

2. If the temperature is too low or too high, the low or high temperature protection function of the mobile phone will be triggered, resulting in automatic restart

3. It may be caused by too many cache files of the mobile phone, resulting in the automatic restart of the mobile phone e to excessive load

4. The abnormal file system in the SD card may cause the phone to restart automatically without any reason

5. Confirm whether the timing switch function is turned on

solution:

(1) if the mobile phone is normal after removing the protective cover, it is recommended to replace the official standard protective cover

(2) it is suggested to keep the mobile phone in the ideal temperature (0 ℃ to 35 ℃) to avoid this problem and effectively improve the battery life

(3) the cache file will be automatically cleared after the phone is restarted. Please use it normally after the phone is restarted. It is recommended to clean up the background applications in time

(4) if the mobile phone uses SD card, it is recommended to take out the SD card after power off and try again

{rrrrrrr}

extended data:

Common Troubleshooting of mobile phone:

fault phenomenon: keyboard failure of mobile phone

< P > 1, keyboard failure caused by confusion of mobile phone system

the mobile phone is made by its own system. From the factory, there are set systems inside to cooperate with the normal use of mobile phone, but the system belongs to software, In the later use process, there will be a variety of problems, such as impact, unstable voltage, the influence of third-party software and other factors, leading to the disorder of the mobile phone system

especially in the process of system updating, if the mobile phone is interrupted by carelessness, it is easy to cause the mobile phone system to fail. Because of the keyboard failure and other symptoms, you need to go to the after-sales service to brush the system, or brush the computer by yourself. Half of the problems can be solved

2. The short circuit of keyboard membrane leads to keyboard failure.

the short circuit of keyboard membrane is simply that the keyboard membrane is damaged. Some of them are also e to long-term use or excessive force, which leads to the failure of the keyboard membrane. In this case, if it just folds and doesn't bounce back, you can disassemble the machine and move the keyboard membrane by yourself

if the circuit board is damaged, but not damaged, you can find an elastic leather pad to use, which can also solve the problem. If the circuit is damaged, you generally need to go to the after-sales department to find the corresponding parts to replace

3. How to save power of mobile phone:
1. Turn down the brightness of the screen
the screen consumes the most power, so you don't have to worry that you can't see clearly when you turn down the brightness of the screen, because even if the screen turns dark, most Android mobile screens still look very clear (Xiaobian thinks that if you turn down the screen a little, you will be more comfortable to see the text, In a sense, it can also protect the eyes, especially at night, to prevent strong light radiation), and can save a lot of electricity. The methods of lowering the brightness of the screen include:
1. Enter "setting" → "display" → "Brightness" to slightly lower the brightness of the screen
2. For mobile phones with optical sensors (such as Xiaomi 4, HTC one, etc., which are currently supported by most mobile phones), you can also set "auto adjust brightness" to let the mobile phone automatically adjust the screen brightness according to the external light
3. If you download an app or a small tool that can adjust the brightness of the screen, you don't need to go to "Settings" every time. For example, the one button power saving function of the power saving master will automatically set the user's mobile phone to automatic brightness< Second, turn off the functions of Wi Fi, Bluetooth, GPS and 3G traffic when you don't need to use the network.
most mobile phones have built-in gadgets to turn off the above functions. Some mobile phones even have drop-down menus. Generally, we don't need to turn them on and off in the "Settings" option every time. If your mobile phone does not have such a built-in gadget, you need to turn it off one by one in the setting options. You can also download the gadget with this function switch. For example, the power management function of power saving master has a function quick switch button< Third, turn off the account synchronization function
e to the national conditions, Google's mobile phone service synchronization service is not available in China. Many domestic mobile phone operating systems, such as MIUI, have their own management account, and can synchronize personal bookmarks, contacts, photos and other information to your account. If you don't always need to synchronize photos and other information, you can turn off the account synchronization function. In addition to saving power, you can also save network traffic (it is recommended to synchronize once a month). The method is as follows:
1, "Settings" → "account and synchronization processing". Select the one you don't need to synchronize and close it (different system operations are slightly different)
2. Download the power-saving master. The one button power-saving function has the function of automatically turning off synchronization. This method does not need to be set by yourself, and can be done with one button< 4. Recing the sleeping time of mobile phone is also a small skill to save power. The method is:
1, "set" → "display" → "sleep", and then select the standby time when the mobile phone enters the sleep state. The options are: 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes and 30 minutes. It has a long standby time. Although it is very convenient, it doesn't need to turn on the screen frequently, but it consumes a lot of power. However, the standby time is not as short as possible. It is recommended to set 30 seconds or 1 minute
2. Download the power saving master. The one button power saving function of the power saving master is automatically set to 30 seconds. Of course, users can also manually set it in the power saving master function button< 5. Turn off the screen immediately to save electricity.
using a mobile phone is just like turning off the light or the tap in your life. It is an effective way to save electricity. At the same time, it is also the easiest habit to cultivate. After watching the mobile phone, you can turn off the screen by pressing the power button< 6. Rece the frequency of automatic data update for some applications
Android phones have many application tools that can automatically update data, such as weather tools and news tools. We can change the update frequency of these tools to save power
for the convenience of the commonly used ink weather tool, just change the update interval from 2 hours to a longer period of time (such as every 4 hours, every 6 hours) when setting< 7. Turn off the GPS positioning function:
the positioning function can help you find nearby businesses and places through your current location when using maps, travel and food apps. However, if you rarely use similar functions, you can turn off the positioning function, even if it is commonly used, because when you start the GPS positioning function, the software will prompt the user to turn on the GPS function
the method is: "setting" → "location service", where you can set to turn off GPS positioning service< 8. Don't use dynamic wallpaper
dynamic wallpaper is a feature that Android version 2.1 started to support. Although it's beautiful and cool, it's a big power consumer. Therefore, it's a very wise choice to change a static wallpaper< 9. Pay attention to the running status of your mobile app:
we often listen to music, play games or watch movies. When a call comes in, we press or slide the mobile phone to answer the call. After talking about the phone, the mobile phone will return to the desktop, but those music, games, video programs are still running, and soon your mobile phone will be dead. If your mobile phone comes with the one click clear function, you can clean it up. If you don't have this function, you have to see the running applications in "Settings" → "applications". You can click the application that you don't want to use at present, and then click "stop" to close it. If it's too troublesome, you can use the one button power saving function of the power saving master to help clean up the memory while optimizing, so as to save power
10. Choose desktop gadgets carefully
although desktop gadgets can understand information more intuitively, they are also the most power consuming applications, because gadgets such as weather, email, news, stocks and so on must constantly update information through the network, and power consumption is very fast. Therefore, when choosing desktop gadgets, please carefully consider which tools you really need to use< 11. Turn off unnecessary sound and vibration:
you should not use this function often. In a quiet environment, touch prompt tone, lock screen prompt tone, and vibration when touching. If it is not very necessary, we can also change the touch prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone Touch when vibration and other sound effects you don't need and vibration off
12. Turn off your cell phone when you go to bed at night
that sounds natural, but most people still keep their cell phones on all night, even if they never receive any calls in the middle of the night. If you are such a person, in fact, you don't have to turn on the phone all night, as long as you know that there may be important calls, just turn on the phone at night. In fact, it's better for mobile phones to have a rest. Although most mobile phones support the turn off alarm, some don't. You should first verify whether your mobile phone supports the turn off alarm, and then decide whether to turn it off, so as to avoid being late for work< When we are discussing how to use mobile phones to save power, we should not forget that maintaining the health of mobile phone batteries is the most fundamental solution
the battery life of mobile phone is between three and five years. Try not to torture it and accelerate its life. Don't plug your cell phone in all night. In addition, don't use your mobile phone from 100% to the last drop of electricity every day, and don't always put your mobile phone in the car with high temperature.

4. No, this phone doesn't have the function of testing temperature. This phone uses Android intelligent operating system, you can download the third-party software to use.

5. First, turn down the screen brightness. The biggest power consumption of a mobile phone is the screen. Therefore, starting from turning down the screen brightness, you don't have to worry that you can't see clearly if you turn down the brightness, because even if the screen turns dark, most Android screens still look very clear (Xiaobian thinks that if you turn down the screen a little, you will be more comfortable looking at the text, In a sense, it can also protect the eyes, especially at night, to prevent strong light radiation), and can save a lot of electricity. The methods to lower the brightness of the screen include: 1. Enter "setting" → "display" → "Brightness", and lower the brightness of the screen slightly. 2. For mobile phones with optical sensors (such as Xiaomi 4, HTC one, etc., which are supported by most mobile phones at present), you can also set "auto adjust brightness" so that the mobile phone can automatically adjust the screen brightness according to the external light. 3. If you download an app or a small tool that can adjust the brightness of the screen, you don't have to go to the "Settings" to adjust it every time. For example, the one button power saving function of the power saving master will automatically set the user's mobile phone to automatic brightness. 2、 Turn off the functions of Wi Fi, Bluetooth, GPS and 3G traffic when you don't need to use the network. Most mobile phones have built-in gadgets to turn off the above functions. Some mobile phones even have drop-down menus. Generally, we don't need to turn them on and off in the "Settings" option every time. If your mobile phone does not have such a built-in gadget, you need to turn it off one by one in the setting options. You can also download the gadget with this function switch. For example, the power management function of power saving master has a function quick switch button. 3、 Turn off the account synchronization function. Due to the national conditions, Google's mobile phone service synchronization service cannot be used in China. Many domestic mobile phone operating systems, such as MIUI, have their own management account, and can synchronize personal bookmarks, contacts, photos and other information to your account. If you don't always need to synchronize photos and other information, you can turn off the account synchronization function. In addition to saving power, you can also save network traffic (it is recommended to synchronize once a month). The method is as follows: 1, "Settings" → "account and synchronization", select the one you don't need to synchronize, and then close it (different system operations are slightly different). 2. Download the power-saving master, the one button power-saving function in it has the function of automatically turning off synchronization. This method does not need to set itself, and can be done with one button. 4、 Recing the sleeping time of mobile phone is also a trick to save power. The method is: 1, "set" → "display" → "sleep", and then select the standby time when the mobile phone enters the sleep state. The options are: 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes and 30 minutes. It has a long standby time. Although it is very convenient, it doesn't need to turn on the screen frequently, but it consumes a lot of power. However, the standby time is not as short as possible. It is recommended to set 30 seconds or 1 minute. 2. Download power saver. The one button power saving function of the power saving master is automatically set to 30 seconds. Of course, users can also manually set it in the power saving master function button. 5、 Turning off the screen and using the mobile phone immediately is just like turning off the light and tap in life. It's an effective way to save electricity. It's also the easiest habit to cultivate. After watching the mobile phone, you can turn off the screen by pressing the power button. 6、 Turn down the frequency of some applications to automatically update data. Android phones have many application tools that can automatically update data, such as weather tools and news tools. We can change the update frequency of these tools to save power. For the convenience of the commonly used ink weather tool, just change the update interval from 2 hours to a longer period of time (such as every 4 hours, every 6 hours) when setting. 7、 Turn off GPS positioning function: positioning function can help you find nearby businesses and places through your current location when using maps, travel and food apps. However, if you rarely use similar functions, you can turn off the positioning function, even if it is commonly used, because when you start the GPS positioning function, the software will prompt the user to turn on the GPS function. The method is: "setting" → "location service", where you can set to turn off GPS positioning service. 8、 Don't use dynamic wallpaper. Dynamic wallpaper is a feature that Android 2.1 starts to support. Although it's beautiful and cool, it's a big power consumer. Therefore, it's a very wise choice to change a static wallpaper. 9、 Pay attention to the running status of your mobile app: we often listen to music, play games or watch movies. When a call comes in, we press or slide the phone to answer the call. After talking about the phone, the mobile phone will return to the desktop, but those music, games, video programs are still running, and soon your mobile phone will be dead. If your mobile phone comes with the one click clear function, you can clean it up. If you don't have this function, you have to see the running applications in "Settings" → "applications". You can click the application that you don't want to use at present, and then click "stop" to close it. If it's too troublesome, you can use the one button power saving function of the power saving master to help clean up the memory while optimizing, so as to save power. 10、 Choose desktop gadgets carefully. Although desktop gadgets can understand information more intuitively, they are also the most power consuming applications. Because gadgets such as weather, email, news, etc. must constantly update information through the network, and power consumption is very fast. Therefore, when choosing desktop gadgets, please carefully consider which tools you really need to use. 11、 Turn off unnecessary sound and vibration: you should not often use this function. In a quiet environment, touch prompt tone, lock screen prompt tone, and vibration when touching. If it is not very necessary, we can also change the touch prompt tone, lock screen prompt tone, lock screen prompt tone, lock screen prompt tone in "Settings" → "sound and vibration" Touch when vibration and other sound effects you don't need and vibration off. 12、 It sounds natural to turn off your cell phone when you go to bed at night, but most people still turn on their cell phone all night, even if they never receive any calls in the middle of the night. If you are such a person, in fact, you don't have to turn on the phone all night, as long as you know that there may be important calls, just turn on the phone at night. In fact, it's better for mobile phones to have a rest. Although most mobile phones support the turn off alarm, some don't. You should first verify whether your mobile phone supports the turn off alarm, and then decide whether to turn it off, so as to avoid being late for work. 13、 Don't let the mobile phone plug in the transmission line to charge all night. When we are discussing how to use the mobile phone to save power, don't forget that maintaining the health of the mobile phone battery is the most fundamental solution. The life of mobile phone battery is between three and five years. Try not to torture it and accelerate its life. Don't plug your cell phone in all night. In addition, don't use your mobile phone from 100% to the last drop of electricity every day, and don't always put your mobile phone in the car with high temperature.