Biossg of mining machinery
Publish: 2021-04-19 06:21:34
1. DRIVE 2 Not Found : Parallel ATA PATA-0 (PRI IDE - Master)
Strike the F1 key to continu,F2 to run the set up utillty
Strike the F1 key to continu,F2 to run the set up utillty
2. If you're an entry-level computer enthusiast, it's recommended that you don't have to worry about it. You can take the host computer to the computer city and let professionals repair it. Generally, as long as the motherboard is not very old, it can be solved quickly.
in fact, it's very easy to repair it yourself, The key is that the tools are hard to find - you need a BIOS of a normal motherboard with the same model as your motherboard.
first open the chassis and pull out the BIOS mole on the faulty motherboard (see the picture for the shape of BIOS), then plug in the normal BIOS prepared in advance, and then fix the motherboard and other hardware and boot normally, At this time, you should be able to start and enter the system smoothly. Use special software (go to the motherboard manufacturer's website) to the BIOS information and save it on the hard disk. Do not shut down the computer first. Unplug the BIOS in the boot state, and then plug in the faulty BIOS (hot swap). After fixing, brush in the normal BIOS information saved before, The whole repair is completed.
the normal BIOS information can also be replaced with a new BIOS driver.
when the CIH virus was rampant in those years, some motherboard manufacturers reserved two BIOS slots on the motherboard, just to refresh the other when one was damaged, but now this kind of design has basically disappeared
in fact, it's very easy to repair it yourself, The key is that the tools are hard to find - you need a BIOS of a normal motherboard with the same model as your motherboard.
first open the chassis and pull out the BIOS mole on the faulty motherboard (see the picture for the shape of BIOS), then plug in the normal BIOS prepared in advance, and then fix the motherboard and other hardware and boot normally, At this time, you should be able to start and enter the system smoothly. Use special software (go to the motherboard manufacturer's website) to the BIOS information and save it on the hard disk. Do not shut down the computer first. Unplug the BIOS in the boot state, and then plug in the faulty BIOS (hot swap). After fixing, brush in the normal BIOS information saved before, The whole repair is completed.
the normal BIOS information can also be replaced with a new BIOS driver.
when the CIH virus was rampant in those years, some motherboard manufacturers reserved two BIOS slots on the motherboard, just to refresh the other when one was damaged, but now this kind of design has basically disappeared
3. Specific details can be referred to, others are how to design, read after adding their own ideas. It's OK.
4. advanced-USB configuration-XHCI-disabled
5. The causes of err0r 0adingoperation system are as follows:
1
2. The MBR table is damaged
3. The hard disk data cable is loose
4. The hard disk is broken
solution:
1. Re install the operating system
2. Boot with U disk or CD, enter PE system, and repair MBR table with partition software (some software is called repair boot)
3. Check the data cable and power cable of the hard disk, and plug in the connector tightly. If the cable is broken, replace it with a new one
4. If you can recognize the hard disk in BIOS, try to reload the system. If you can't reload, try to partition the hard disk again. If you can't partition, try to format the hard disk at a low level. BIOS can not recognize the hard disk, only a new hard disk.
1
2. The MBR table is damaged
3. The hard disk data cable is loose
4. The hard disk is broken
solution:
1. Re install the operating system
2. Boot with U disk or CD, enter PE system, and repair MBR table with partition software (some software is called repair boot)
3. Check the data cable and power cable of the hard disk, and plug in the connector tightly. If the cable is broken, replace it with a new one
4. If you can recognize the hard disk in BIOS, try to reload the system. If you can't reload, try to partition the hard disk again. If you can't partition, try to format the hard disk at a low level. BIOS can not recognize the hard disk, only a new hard disk.
6. There are three ways to reload the system: reloading the system will only change the system in the C disk of the computer. For example, there are no less files and things in the D, e and f disks of the computer
the first is the hard disk installation system. As long as the computer system does not crash, can enter the system, and can download things, you can use the computer hard disk to install the system. The method is as follows:
according to your computer configuration, you can completely install the win7 operating system. Using the computer hard disk to install the system, you can install the win7 system. The specific operations are as follows: 1. You can download the win7 64 bit operating system from the system download base:
2. Decompress the downloaded win7 64 bit operating system to disk D, never to disk C
3. Open the unzipped folder, double-click "autorun", and then click "Install" in the open window.
4. In the window that appears, the path of ghost image file will be added automatically. Select the partition to be restored to. The default is disk C. click "OK" to install it automatically
the second is CD-ROM installation system. Suitable for computer BIOS settings are very familiar with it Find and enter the option with the word "BIOS" in the BIOS interface. 1. "Advanced BIOS features"
2. After entering "advanced BIOS features", find the first boot device option with "first"
3. In the "first boot device" option, select "CDROM" enter. After all the configurations are set, click "CDROM" enter, Press the "F10" key on the keyboard to save and exit, then the computer will restart itself, and the rest is to install the system automatically
the above steps are to set up BIOS startup. Each computer BIOS settings are different, you can refer to it. Once you learn, you can install the system on CD
the third is the U disk installation system. Suitable for computer BIOS settings are very familiar with it. After reading the U disk making tutorial, you will use the disk to install the system. Go to the computer store and learn how to install the system.
the first is the hard disk installation system. As long as the computer system does not crash, can enter the system, and can download things, you can use the computer hard disk to install the system. The method is as follows:
according to your computer configuration, you can completely install the win7 operating system. Using the computer hard disk to install the system, you can install the win7 system. The specific operations are as follows: 1. You can download the win7 64 bit operating system from the system download base:
2. Decompress the downloaded win7 64 bit operating system to disk D, never to disk C
3. Open the unzipped folder, double-click "autorun", and then click "Install" in the open window.
4. In the window that appears, the path of ghost image file will be added automatically. Select the partition to be restored to. The default is disk C. click "OK" to install it automatically
the second is CD-ROM installation system. Suitable for computer BIOS settings are very familiar with it Find and enter the option with the word "BIOS" in the BIOS interface. 1. "Advanced BIOS features"
2. After entering "advanced BIOS features", find the first boot device option with "first"
3. In the "first boot device" option, select "CDROM" enter. After all the configurations are set, click "CDROM" enter, Press the "F10" key on the keyboard to save and exit, then the computer will restart itself, and the rest is to install the system automatically
the above steps are to set up BIOS startup. Each computer BIOS settings are different, you can refer to it. Once you learn, you can install the system on CD
the third is the U disk installation system. Suitable for computer BIOS settings are very familiar with it. After reading the U disk making tutorial, you will use the disk to install the system. Go to the computer store and learn how to install the system.
7. Hello, thank you for asking questions
press F2 to enter the BIOS interface after power on
welcome to ask questions to the enterprise again, and wish you a happy working life
press F2 to enter the BIOS interface after power on
welcome to ask questions to the enterprise again, and wish you a happy working life
8. How do you want to reload
do you want to start the USB flash drive
generally, it's enough to set the USB disk to start first
in addition, just remember to turn off the secure boot
if not, it is recommended to take a picture
do you want to start the USB flash drive
generally, it's enough to set the USB disk to start first
in addition, just remember to turn off the secure boot
if not, it is recommended to take a picture
9. You first look at the most basic, first of all, all the threads outside to see if the contact is good, and then look at the equipment inside that contact is not good! We can find out the reason by eliminating it slowly!
Hot content