Can the liquid pump supply water to the washing machine

1. Dig three or more pits on the side of the ore washing machine. The posture is arbitrary. As long as the three or more pits are connected together, the injected water will become infinite water. Then put the instrial pump next to the ore washing machine and power on. OK, the instrial pump will pump the water from the pit just g into the ore washing machine!

2.

1、 Steps:

1, the use of the pump needs to dig a pool out first, and put water on it

3. Well. I can't use it either. Everything I put is the same as 172, but it doesn't work.

4. Because it's near thiazole

5. Put the pump in the water and power on. Pay attention to the direction. The pump can only pump water from the front. Don't block the front

6. Water supply pump and drainage pump, from the point of view of the pump is no difference, from the point of view of the use is different
for example, a pipeline pump is a feed water pump to deliver domestic water to a residential area. But if you clean up the water supply pool, it becomes a drainage pump
it's just the opposite of the process

generally speaking, the drainage pump mainly discharges sewage and rainwater, because the liquid contains impurities. Commonly used is the sewage pump. However, if it is liquid sewage, such as river water without obvious impurities, precipitation rain water, and sludge water (turbid, but not viscous) treated by some sewage treatment plants, it can also be supplied by centrifugal pipe pump

as long as the drainage pump can meet the requirements of water supply, such as flow, head, medium, temperature, pH and so on, it can be used completely
the key is selection
just like whether a person can deliver the gas tank or charge the gas tank, although it is a reverse process, as long as the person can resist to complete the work.

7. Yes, as long as there is an outlet, there will be water supply
there is a disadvantage, as long as there are branches, the flow rate will be halved no matter what, and it is not recommended to connect too many water pipes

8. The liquid sulfur pump is designed with heat preservation jacket pipe and Japanese submerged gear pump technology, with high machining precision and precise coordination. Frequency conversion can be used to control flow regulation, with stable flow, low speed, small motor power and long service life. Easy to use, long operation cycle. The conveying flow is stable and the pulsation is small. It is mainly used in liquid sulfur, liquid asphalt, liquid paraffin, high temperature coal tar and other media that need heat preservation and heating. Pump body materials: cast iron, ctile iron, 304, 316 can meet the needs of different media. It is used in petroleum, chemical instry, chemical fiber, viscose, sulfuric acid, liquid alkali, asphalt and other instries. The liquid in the storage tank can be directly transported to the process pipeline through the submerged gear pump. Completely prevent leakage, rece the harm of toxic and harmful leakage liquid to workers, and change the pollution of factory and environment. Want to know the specific, you can ask whell pump.

9.

The pressure of municipal tap water is 4kg, and that of domestic pressure pump is almost the same. In addition, the water heater has a pressure relief valve. No matter how much the pressure is, it should be discharged to 0.7kg to ensure that the internal components of the water heater are not damaged and can be used

before use, tighten the air permeability, fill in appropriate oil (such as 1 / 2 transformer oil), then tighten the air permeability, repeatedly grip, loosen the handle, and drive out the gas in the oil cylinder

During the calibration process of pressure pump, attention should be paid to keep all kinds of connections sealed. After calibration, the oil drain handle should be rotated to open the oil drain valve before dismantling the instrument, otherwise the instrument will be damaged easily

10. Unknown_Error