No IP address found in S9 miner

1. Go directly to ask the miner, they will tell you, or send some tutorials on the Internet. bitcoin home. I remember that there were all kinds of mining machines before. You can check them out. I hope I can help you.

2. 1
if all the cables are connected, we can turn on any connected PC at this time. Turn on the network neighborhood property
2
and then turn on the local connection property
3
and then turn on the TCP / IP protocol property

3. Central bank, because the blockchain technology is decentralized, the central bank wants to hold its position and will definitely apply the blockchain technology, and then reap benefits from it. Now the state bans bitcoin because the central bank is studying and applying the blockchain technology. After it is perfected and successful, it will access bitcoin and then use it on a large scale.

4. First, whether to disable the wireless network card
1. Enter control panel network and Internet network connection
2. Check whether the wireless network card is disabled

3. Select wireless and right-click enable

method 2: whether to install wireless network card driver
1. Enter control panel network and Internet network connection. Wireless network connection is not displayed. It means that the wireless network card driver is not installed
2. Enter the official website of drive Wizard: http://www.drivergenius.com/

3

4. Open the software, the software will automatically detect the driver to be installed, and then manually install it.

5. Maybe more than 60000. Now, but bitcoin can be bought separately. You can buy bitcoin for at least 10 yuan, and you can buy okex app. I don't know if it can help you. If it helps, please take it. Thank you

6. The camera is not designed to search the IP address, so it's normal that it can't be searched? Do you mean you can't get the IP address automatically? If so, check whether the network is connected and whether the DHCP service is turned on in the network. If there is no DHCP, the server will not automatically get the IP.

7. Ordinary home broadband is generally set PPPoE Internet access, need account password, if you want to through dynamic IP, you need the upper route to open the DHCP service

8.

How to enter the router:

1. Check the IP first, method: Win + R --- input: CMD --- input: ipconfig on the black-and-white interface, and press enter

2. Check the router address according to the gateway. If the gateway is 192.168.2.1, then the IP of the router is generally. 192.168.2.1

3. Enter the address in IE address bar: 192.168.2.1

4. Pop up the router login interface, and enter the default login user name of the router: admin, password: admin (if it is not correct, look at the back of the router)

9. Oh, this should be your router replacement, did not assign an IP to the camera, so it can not be found

change the IP acquisition mode of the video recorder to automatic acquisition. Take a look. If there is IP or not, change the last number of IP. Restart the device. Restart the router. Look

if you can't do it any more, please consult the merchant who bought the goods!

10. The reasons for not finding the IP address are as follows:
1. The wireless network card does not support the default wireless channel
2. The computer can't get IP automatically
solution:
suppose that the IP of the router is 192.168.1.1, please refer to the label or instructions on the router box
1. Open the browser, enter 192.168.1.1 (the IP address of the router), and enter the router account number and password (see the label or instructions on the router box)
2. Take TP-LINK as an example, click Wireless Settings - basic settings, right channel: select 1 or 6 or 9
because the signal interference of channel 1 or 6 or 9 is minimal
3. If the fault cannot be eliminated, it is recommended that the computer set the static IP as follows:
1) click the network logo in the lower right corner, right-click and select open network and sharing center
2) click [wireless network connection]
3) click [attribute]
4) select Internet Protocol version 4 (TCP / IPv4) and click properties
5) select [use the following IP address]
IP address: 192.168.1.100 (192.168.1.2 ~ 192.168.1.254)
subnet mask: 255.255.255.0
Default Gateway: 192.168.1.1
select use DNS server address below
preferred DNS server: 192.168.1.1 (regional general DNS can also be filled in)
standby DNS server: optional; Point determination.